Hierarchical motion estimation for side information creation in Wyner-Ziv video coding

Recently, several video coding solutions based on the distributed source coding paradigm have appeared in the literature. Among them, Wyner-Ziv video coding schemes enable to achieve a flexible distribution of the computational complexity between the encoder and decoder, promising to fulfill requirements of emerging applications such as visual sensor networks and wireless surveillance. To achieve a performance comparable to the predictive video coding solutions, it is necessary to increase the quality of the side information, this means the estimation of the original frame created at the decoder. In this paper, a hierarchical motion estimation (HME) technique using different scales and increasingly smaller block sizes is proposed to generate a more reliable estimation of the motion field. The HME technique is integrated in a well known motion compensated frame interpolation framework responsible for the creation of the side information in a Wyner-Ziv video decoder. The proposed technique enables to achieve improvements in the rate-distortion (RD) performance up to 7 dB when compared to H.263+ Intra and 3 dB when compared to H.264/AVC Intra

Improved side information generation for distributed video coding

As a new coding paradigm, distributed video coding (DVC) deals with lossy source coding using side information to exploit the statistics at the decoder to reduce computational demands at the encoder. The performance of DVC highly depends on the quality of side information. With a better side information generation method, fewer bits will be requested from the encoder and more reliable decoded frames will be obtained. In this paper, a side information generation method is introduced to further improve the rate-distortion (RD) performance of transform domain distributed video coding. This algorithm consists of a variable block size based Y, U and V component motion estimation and an adaptive weighted overlapped block motion compensation (OBMC). The proposal is tested and compared with the results of an executable DVC codec released by DISCOVER group (DIStributed COding for Video sERvices). RD improvements on the set of test sequences are observed

Low complexity video compression using moving edge detection based on DCT coefficients

In this paper, we propose a new low complexity video compression method based on detecting blocks containing moving edges us- ing only DCT coe±cients. The detection, whilst being very e±cient, also allows e±cient motion estimation by constraining the search process to moving macro-blocks only. The encoders PSNR is degraded by 2dB com- pared to H.264/AVC inter for such scenarios, whilst requiring only 5% of the execution time. The computational complexity of our approach is comparable to that of the DISCOVER codec which is the state of the art low complexity distributed video coding. The proposed method ¯nds blocks with moving edge blocks and processes only selected blocks. The approach is particularly suited to surveillance type scenarios with a static camera

REGION-BASED ADAPTIVE DISTRIBUTED VIDEO CODING CODEC

The recently developed Distributed Video Coding (DVC) is typically suitable for the applications where the conventional video coding is not feasible because of its inherent high-complexity encoding. Examples include video surveillance usmg wireless/wired video sensor network and applications using mobile cameras etc. With DVC, the complexity is shifted from the encoder to the decoder. The practical application of DVC is referred to as Wyner-Ziv video coding (WZ) where an estimate of the original frame called "side information" is generated using motion compensation at the decoder. The compression is achieved by sending only that extra information that is needed to correct this estimation. An error-correcting code is used with the assumption that the estimate is a noisy version of the original frame and the rate needed is certain amount of the parity bits. The side information is assumed to have become available at the decoder through a virtual channel. Due to the limitation of compensation method, the predicted frame, or the side information, is expected to have varying degrees of success. These limitations stem from locationspecific non-stationary estimation noise. In order to avoid these, the conventional video coders, like MPEG, make use of frame partitioning to allocate optimum coder for each partition and hence achieve better rate-distortion performance. The same, however, has not been used in DVC as it increases the encoder complexity. This work proposes partitioning the considered frame into many coding units (region) where each unit is encoded differently. This partitioning is, however, done at the decoder while generating the side-information and the region map is sent over to encoder at very little rate penalty. The partitioning allows allocation of appropriate DVC coding parameters (virtual channel, rate, and quantizer) to each region. The resulting regions map is compressed by employing quadtree algorithm and communicated to the encoder via the feedback channel. The rate control in DVC is performed by channel coding techniques (turbo codes, LDPC, etc.). The performance of the channel code depends heavily on the accuracy of virtual channel model that models estimation error for each region. In this work, a turbo code has been used and an adaptive WZ DVC is designed both in transform domain and in pixel domain. The transform domain WZ video coding (TDWZ) has distinct superior performance as compared to the normal Pixel Domain Wyner-Ziv (PDWZ), since it exploits the ' spatial redundancy during the encoding. The performance evaluations show that the proposed system is superior to the existing distributed video coding solutions. Although the, proposed system requires extra bits representing the "regions map" to be transmitted, fuut still the rate gain is noticeable and it outperforms the state-of-the-art frame based DVC by 0.6-1.9 dB. The feedback channel (FC) has the role to adapt the bit rate to the changing ' statistics between the side infonmation and the frame to be encoded. In the unidirectional scenario, the encoder must perform the rate control. To correctly estimate the rate, the encoder must calculate typical side information. However, the rate cannot be exactly calculated at the encoder, instead it can only be estimated. This work also prbposes a feedback-free region-based adaptive DVC solution in pixel domain based on machine learning approach to estimate the side information. Although the performance evaluations show rate-penalty but it is acceptable considering the simplicity of the proposed algorithm. vii

The DISCOVER codec: Architecture, Techniques and Evaluation

Distributed Video Coding is becoming more and more popular among the research community, because of its interesting theoretical contributions and because there are still many open problems waiting to be solved. This paper introduces the codec architecture and the associated tools adopted by DISCOVER (DIStributed COding for Video sERvices), a European project which has been devoted to the advancement of Distributed Video Coding for two years. Along with the general description and pointers to references with more detailed information, this paper also presents some of the results obtained with the DISCOVER codec. An extended performance analysis and the codec’s executable file are both publicly available on the project’s web site www.discoverdvc.org

REGION-BASED ADAPTIVE DISTRIBUTED VIDEO CODING CODEC

The recently developed Distributed Video Coding (DVC) is typically suitable for the applications where the conventional video coding is not feasible because of its inherent high-complexity encoding. Examples include video surveillance usmg wireless/wired video sensor network and applications using mobile cameras etc. With DVC, the complexity is shifted from the encoder to the decoder. The practical application of DVC is referred to as Wyner-Ziv video coding (WZ) where an estimate of the original frame called "side information" is generated using motion compensation at the decoder. The compression is achieved by sending only that extra information that is needed to correct this estimation. An error-correcting code is used with the assumption that the estimate is a noisy version of the original frame and the rate needed is certain amount of the parity bits. The side information is assumed to have become available at the decoder through a virtual channel. Due to the limitation of compensation method, the predicted frame, or the side information, is expected to have varying degrees of success. These limitations stem from locationspecific non-stationary estimation noise. In order to avoid these, the conventional video coders, like MPEG, make use of frame partitioning to allocate optimum coder for each partition and hence achieve better rate-distortion performance. The same, however, has not been used in DVC as it increases the encoder complexity. This work proposes partitioning the considered frame into many coding units (region) where each unit is encoded differently. This partitioning is, however, done at the decoder while generating the side-information and the region map is sent over to encoder at very little rate penalty. The partitioning allows allocation of appropriate DVC coding parameters (virtual channel, rate, and quantizer) to each region. The resulting regions map is compressed by employing quadtree algorithm and communicated to the encoder via the feedback channel. The rate control in DVC is performed by channel coding techniques (turbo codes, LDPC, etc.). The performance of the channel code depends heavily on the accuracy of virtual channel model that models estimation error for each region. In this work, a turbo code has been used and an adaptive WZ DVC is designed both in transform domain and in pixel domain. The transform domain WZ video coding (TDWZ) has distinct superior performance as compared to the normal Pixel Domain Wyner-Ziv (PDWZ), since it exploits the ' spatial redundancy during the encoding. The performance evaluations show that the proposed system is superior to the existing distributed video coding solutions. Although the, proposed system requires extra bits representing the "regions map" to be transmitted, fuut still the rate gain is noticeable and it outperforms the state-of-the-art frame based DVC by 0.6-1.9 dB. The feedback channel (FC) has the role to adapt the bit rate to the changing ' statistics between the side infonmation and the frame to be encoded. In the unidirectional scenario, the encoder must perform the rate control. To correctly estimate the rate, the encoder must calculate typical side information. However, the rate cannot be exactly calculated at the encoder, instead it can only be estimated. This work also prbposes a feedback-free region-based adaptive DVC solution in pixel domain based on machine learning approach to estimate the side information. Although the performance evaluations show rate-penalty but it is acceptable considering the simplicity of the proposed algorithm. vii