The design and evaluation of an interface and control system for a scariculated rehabilitation robot arm

This thesis is concerned with the design and development of a prototype implementation of a Rehabilitation Robotic manipulator based on a novel kinematic configuration. The initial aim of the research was to identify appropriate design criteria for the design of a user interface and control system, and for the subsequent evaluation of the manipulator prototype. This led to a review of the field of rehabilitation robotics, focusing on user evaluations of existing systems. The review showed that the design objectives of individual projects were often contradictory, and that a requirement existed for a more general and complete set of design criteria. These were identified through an analysis of the strengths and weaknesses of existing systems, including an assessment of manipulator performances, commercial success and user feedback. The resulting criteria were used for the design and development of a novel interface and control system for the Middlesex Manipulator - the novel scariculated robotic system. A highly modular architecture was adopted, allowing the manipulator to provide a level of adaptability not approached by existing rehabilitation robotic systems. This allowed the interface to be configured to match the controlling ability and input device selections of individual users. A range of input devices was employed, offering variation in communication mode and bandwidth. These included a commercial voice recognition system, and a novel gesture recognition device. The later was designed using electrolytic tilt sensors, the outputs of which were encoded by artificial neural networks. These allowed for control of the manipulator through head or hand gestures. An individual with spinal-cord injury undertook a single-subject user evaluation of the Middlesex Manipulator over a period of four months. The evaluation provided evidence for the value of adaptability presented by the user interface. It was also shown that the prototype did not currently confonn to all the design criteria, but allowed for the identification of areas for design improvements. This work led to a second research objective, concerned with the problem of configuring an adaptable user interface for a specific individual. A novel form of task analysis is presented within the thesis, that allows the relative usability of interface configurations to be predicted based upon individual user and input device characteristics. An experiment was undertaken with 6 subjects performing 72 tasks runs with 2 interface configurations controlled by user gestures. Task completion times fell within the range predicted, where the range was generated using confidence intervals (α = 0.05) on point estimates of user and device characteristics. This allowed successful prediction over all task runs of the relative task completion times of interface configurations for a given user

The Middlesex University rehabilitation robot

This paper outlines the historical developments of Wheelchair-Mounted Robot Arms (WMRA's) and then focuses on the ongoing research at Middlesex to develop a low-cost aid to daily living for users with high-level quadriplegia. A detailed review is given explaining the design specification. It describes the construction of the robotic device and its control architecture. The prototype robot used several gesture recognition and other input systems. The prototype has been tested on disabled and non-disabled users with positive feedback. They observed that it was easy to use, but issues about speed of operation were resolved after further development. The robot has a payload of greater than 1kg with a maximum reach of 0.7–0.9m. Published by the Taylor & Francis Publishing Group, this publication is one of the only journals to cover the multi-disciplinary area of medical technology research. Currently, research bids are being formulated with the School of Computing Science to continue this research

ROS Based Multi-sensor Navigation of Intelligent Wheelchair

Our society is moving towards an ageing society and the number of population with physical impairments and disabilities will increase dramatically. It is necessary to provide mobility support to these people so that they can live independently at home and integrated into the society. This paper presents a ROS (Robot Operating System) based multi-sensor navigation for an intelligent wheelchair that can help the elderly and disabled people. ROS provides an easy to use framework for rapid system development at a reduced cost. Some experimental results are given in the paper to demonstrate the feasibility and performance of the developed system

How a Diverse Research Ecosystem Has Generated New Rehabilitation Technologies: Review of NIDILRR’s Rehabilitation Engineering Research Centers

Over 50 million United States citizens (1 in 6 people in the US) have a developmental, acquired, or degenerative disability. The average US citizen can expect to live 20% of his or her life with a disability. Rehabilitation technologies play a major role in improving the quality of life for people with a disability, yet widespread and highly challenging needs remain. Within the US, a major effort aimed at the creation and evaluation of rehabilitation technology has been the Rehabilitation Engineering Research Centers (RERCs) sponsored by the National Institute on Disability, Independent Living, and Rehabilitation Research. As envisioned at their conception by a panel of the National Academy of Science in 1970, these centers were intended to take a “total approach to rehabilitation”, combining medicine, engineering, and related science, to improve the quality of life of individuals with a disability. Here, we review the scope, achievements, and ongoing projects of an unbiased sample of 19 currently active or recently terminated RERCs. Specifically, for each center, we briefly explain the needs it targets, summarize key historical advances, identify emerging innovations, and consider future directions. Our assessment from this review is that the RERC program indeed involves a multidisciplinary approach, with 36 professional fields involved, although 70% of research and development staff are in engineering fields, 23% in clinical fields, and only 7% in basic science fields; significantly, 11% of the professional staff have a disability related to their research. We observe that the RERC program has substantially diversified the scope of its work since the 1970’s, addressing more types of disabilities using more technologies, and, in particular, often now focusing on information technologies. RERC work also now often views users as integrated into an interdependent society through technologies that both people with and without disabilities co-use (such as the internet, wireless communication, and architecture). In addition, RERC research has evolved to view users as able at improving outcomes through learning, exercise, and plasticity (rather than being static), which can be optimally timed. We provide examples of rehabilitation technology innovation produced by the RERCs that illustrate this increasingly diversifying scope and evolving perspective. We conclude by discussing growth opportunities and possible future directions of the RERC program

Applications of the electric potential sensor for healthcare and assistive technologies

The work discussed in this thesis explores the possibility of employing the Electric Potential Sensor for use in healthcare and assistive technology applications with the same and in some cases better degrees of accuracy than those of conventional technologies. The Electric Potential Sensor is a generic and versatile sensing technology capable of working in both contact and non-contact (remote) modes. New versions of the active sensor were developed for specific surface electrophysiological signal measurements. The requirements in terms of frequency range, electrode size and gain varied with the type of signal measured for each application. Real-time applications based on electrooculography, electroretinography and electromyography are discussed, as well as an application based on human movement. A three sensor electrooculography eye tracking system was developed which is of interest to eye controlled assistive technologies. The system described achieved an accuracy at least as good as conventional wet gel electrodes for both horizontal and vertical eye movements. Surface recording of the electroretinogram, used to monitor eye health and diagnose degenerative diseases of the retina, was achieved and correlated with both corneal fibre and wet gel surface electrodes. The main signal components of electromyography lie in a higher bandwidth and surface signals of the deltoid muscle were recorded over the course of rehabilitation of a subject with an injured arm. Surface electromyography signals of the bicep were also recorded and correlated with the joint dynamics of the elbow. A related non-contact application of interest to assistive technologies was also developed. Hand movement within a defined area was mapped and used to control a mouse cursor and a predictive text interface

IoT-based smart wheelchair system for physically impaired person / Muhammad Afiq Mohd Aizam... [et al.]

Disabled persons usually require an assistant to help them in their daily routines especially for their mobility. The limitation of being physically impaired affects the quality of life in executing their daily routine especially the ones with a wheelchair. Pushing a wheelchair has its own side effects for the user especially the person with hands and arms impairments. This paper aims to develop a smart wheelchair system integrated with home automation. With the advent of the Internet of Things (IoT), a smart wheelchair can be operated using voice command through the Google assistant Software Development Kit (SDK). The smart wheelchair system and the home automation of this study were powered by Raspberry Pi 3 B+ and NodeMCU, respectively. Voice input commands were processed by the Google assistant Artificial Intelligence Yourself (AIY) to steer the movement of wheelchair. Users were able to speak to Google to discover any information from the website. For the safety of the user, a streaming camera was added on the wheelchair. An improvement to the wheelchair system that was added on the wheelchair is its combination with the home automation to help the impaired person to control their home appliances through Blynk application. Observations on three voice tones (low, medium and high) of voice command show that the minimum voice intensity for this smart wheelchair system is 68.2 dB. Besides, the user is also required to produce a clear voice command to increase the system accuracy

Human-machine interfaces based on EMG and EEG applied to robotic systems

<p>Abstract</p> <p>Background</p> <p>Two different Human-Machine Interfaces (HMIs) were developed, both based on electro-biological signals. One is based on the EMG signal and the other is based on the EEG signal. Two major features of such interfaces are their relatively simple data acquisition and processing systems, which need just a few hardware and software resources, so that they are, computationally and financially speaking, low cost solutions. Both interfaces were applied to robotic systems, and their performances are analyzed here. The EMG-based HMI was tested in a mobile robot, while the EEG-based HMI was tested in a mobile robot and a robotic manipulator as well.</p> <p>Results</p> <p>Experiments using the EMG-based HMI were carried out by eight individuals, who were asked to accomplish ten eye blinks with each eye, in order to test the eye blink detection algorithm. An average rightness rate of about 95% reached by individuals with the ability to blink both eyes allowed to conclude that the system could be used to command devices. Experiments with EEG consisted of inviting 25 people (some of them had suffered cases of meningitis and epilepsy) to test the system. All of them managed to deal with the HMI in only one training session. Most of them learnt how to use such HMI in less than 15 minutes. The minimum and maximum training times observed were 3 and 50 minutes, respectively.</p> <p>Conclusion</p> <p>Such works are the initial parts of a system to help people with neuromotor diseases, including those with severe dysfunctions. The next steps are to convert a commercial wheelchair in an autonomous mobile vehicle; to implement the HMI onboard the autonomous wheelchair thus obtained to assist people with motor diseases, and to explore the potentiality of EEG signals, making the EEG-based HMI more robust and faster, aiming at using it to help individuals with severe motor dysfunctions.</p