16,698 research outputs found
Plausible Mobility: Inferring Movement from Contacts
We address the difficult question of inferring plausible node mobility based
only on information from wireless contact traces. Working with mobility
information allows richer protocol simulations, particularly in dense networks,
but requires complex set-ups to measure, whereas contact information is easier
to measure but only allows for simplistic simulation models. In a contact trace
a lot of node movement information is irretrievably lost so the original
positions and velocities are in general out of reach. We propose a fast
heuristic algorithm, inspired by dynamic force-based graph drawing, capable of
inferring a plausible movement from any contact trace, and evaluate it on both
synthetic and real-life contact traces. Our results reveal that (i) the quality
of the inferred mobility is directly linked to the precision of the measured
contact trace, and (ii) the simple addition of appropriate anticipation forces
between nodes leads to an accurate inferred mobility.Comment: 8 pages, 8 figures, 1 tabl
A New Look at Physical Layer Security, Caching, and Wireless Energy Harvesting for Heterogeneous Ultra-dense Networks
Heterogeneous ultra-dense networks enable ultra-high data rates and ultra-low
latency through the use of dense sub-6 GHz and millimeter wave (mmWave) small
cells with different antenna configurations. Existing work has widely studied
spectral and energy efficiency in such networks and shown that high spectral
and energy efficiency can be achieved. This article investigates the benefits
of heterogeneous ultra-dense network architecture from the perspectives of
three promising technologies, i.e., physical layer security, caching, and
wireless energy harvesting, and provides enthusiastic outlook towards
application of these technologies in heterogeneous ultra-dense networks. Based
on the rationale of each technology, opportunities and challenges are
identified to advance the research in this emerging network.Comment: Accepted to appear in IEEE Communications Magazin
Atomic-SDN: Is Synchronous Flooding the Solution to Software-Defined Networking in IoT?
The adoption of Software Defined Networking (SDN) within traditional networks
has provided operators the ability to manage diverse resources and easily
reconfigure networks as requirements change. Recent research has extended this
concept to IEEE 802.15.4 low-power wireless networks, which form a key
component of the Internet of Things (IoT). However, the multiple traffic
patterns necessary for SDN control makes it difficult to apply this approach to
these highly challenging environments. This paper presents Atomic-SDN, a highly
reliable and low-latency solution for SDN in low-power wireless. Atomic-SDN
introduces a novel Synchronous Flooding (SF) architecture capable of
dynamically configuring SF protocols to satisfy complex SDN control
requirements, and draws from the authors' previous experiences in the IEEE EWSN
Dependability Competition: where SF solutions have consistently outperformed
other entries. Using this approach, Atomic-SDN presents considerable
performance gains over other SDN implementations for low-power IoT networks. We
evaluate Atomic-SDN through simulation and experimentation, and show how
utilizing SF techniques provides latency and reliability guarantees to SDN
control operations as the local mesh scales. We compare Atomic-SDN against
other SDN implementations based on the IEEE 802.15.4 network stack, and
establish that Atomic-SDN improves SDN control by orders-of-magnitude across
latency, reliability, and energy-efficiency metrics
Control-data separation architecture for cellular radio access networks: a survey and outlook
Conventional cellular systems are designed to ensure ubiquitous coverage with an always present wireless channel irrespective of the spatial and temporal demand of service. This approach raises several problems due to the tight coupling between network and data access points, as well as the paradigm shift towards data-oriented services, heterogeneous deployments and network densification. A logical separation between control and data planes is seen as a promising solution that could overcome these issues, by providing data services under the umbrella of a coverage layer. This article presents a holistic survey of existing literature on the control-data separation architecture (CDSA) for cellular radio access networks. As a starting point, we discuss the fundamentals, concepts, and general structure of the CDSA. Then, we point out limitations of the conventional architecture in futuristic deployment scenarios. In addition, we present and critically discuss the work that has been done to investigate potential benefits of the CDSA, as well as its technical challenges and enabling technologies. Finally, an overview of standardisation proposals related to this research vision is provided
Wirelessly Powered Backscatter Communication Networks: Modeling, Coverage and Capacity
Future Internet-of-Things (IoT) will connect billions of small computing
devices embedded in the environment and support their device-to-device (D2D)
communication. Powering this massive number of embedded devices is a key
challenge of designing IoT since batteries increase the devices' form factors
and battery recharging/replacement is difficult. To tackle this challenge, we
propose a novel network architecture that enables D2D communication between
passive nodes by integrating wireless power transfer and backscatter
communication, which is called a wirelessly powered backscatter communication
(WP-BackCom) network. In the network, standalone power beacons (PBs) are
deployed for wirelessly powering nodes by beaming unmodulated carrier signals
to targeted nodes. Provisioned with a backscatter antenna, a node transmits
data to an intended receiver by modulating and reflecting a fraction of a
carrier signal. Such transmission by backscatter consumes orders-of-magnitude
less power than a traditional radio. Thereby, the dense deployment of
low-complexity PBs with high transmission power can power a large-scale IoT. In
this paper, a WP-BackCom network is modeled as a random Poisson cluster process
in the horizontal plane where PBs are Poisson distributed and active ad-hoc
pairs of backscatter communication nodes with fixed separation distances form
random clusters centered at PBs. The backscatter nodes can harvest energy from
and backscatter carrier signals transmitted by PBs. Furthermore, the
transmission power of each node depends on the distance from the associated PB.
Applying stochastic geometry, the network coverage probability and transmission
capacity are derived and optimized as functions of backscatter parameters,
including backscatter duty cycle and reflection coefficient, as well as the PB
density. The effects of the parameters on network performance are
characterized.Comment: 28 pages, 11 figures, has been submitted to IEEE Trans. on Wireless
Communicatio
- …