Resource management research in ethernet passive optical networks

The last decades, we have witnessed different phenomenology in the telecommunications sector. One of them is the widespread use of the Internet, which has brought a sharp increase in traffic, forcing suppliers to continuously expand the capacity of networks. In the near future, Internet will be composed of long-range highspeed optical networks; a number of wireless networks at the edge; and, in between, several access technologies. Today one of the main problems of the Internet is the bottleneck in the access segment. To address this issue the Passive Optical Networks (PONs) are very likely to succeed, due to their simplicity, low-cost, and increased bandwidth. A PON is made up of fiber optic cabling and passive splitters and couplers that distribute an optical signal to connectors that terminate each fiber segment. Among the different PON technologies, the Ethernet-PON (EPON) is a great alternative to satisfy operator and user needs, due to its cost, flexibility and interoperability with other technologies. One of the most interesting challenges in such technologies relates to the scheduling and allocation of resources in the upstream (shared) channel, i.e., the resource management. The aim of this thesis is to study and evaluate current contributions and propose new efficient solutions to address the resource management issues mainly in EPON. Key issues in this context are future end-user needs, quality of service (QoS) support, energy-saving and optimized service provisioning for real-time and elastic flows. This thesis also identifies research opportunities, issue recommendations and proposes novel mechanisms associated with access networks based on optical fiber technologies.Postprint (published version

Optimizing resource allocation in next-generation optical access networks

To meet rapidly increasing traffic demands caused by the popularization of Internet and the spouting of bandwidth-demanding applications, Passive Optical Networks (PONs) exploit the potential capacities of optical fibers, and are becoming promising future-proof access network technologies. On the other hand, for a broader coverage area and higher data rate, integrated optical and wireless access is becoming a future trend for wireless access. This thesis investigates three next-generation access networks: Time Division Multiplexing (TDM) PONs, Wavelength Division Multiplexing (WDM) PONs, and WDM Radio-Over-Fiber (RoF) Picocellular networks. To address resource allocation problems in these three networks, this thesis first investigates respective characteristics of these networks, and then presents solutions to address respective challenging problems in these networks. In particular, three main problems are addressed: arbitrating time allocation among different applications to guarantee user quality of experience (QoE) in TDM PONs, scheduling wavelengths optimally in WDM PONs, and jointly allocating fiber and radio resources in WDM RoF Picocellular networks. In-depth theoretical analysis and extensive simulations have been performed in evaluating and demonstrating the performances of the proposed schemes

Contributions towards softwarization and energy saving in passive optical networks

Ths thesis is a result of contributions to optimize and improve the network management systme and power consumption in Passive Optical Network (PON). Passive Optical Network elements such as Optical Line Terminal (OLT) and Optical Network Units (ONUs) are currently managed by inflexible legacy network management systems. Software-Defined Networking (SDN) is a new networking paradigm that improves the operation and management of networks by decoupling control plane from data plane. Currently, network management in PON networks is not always automated nor normalized. One goal of the researchers in optical networking is to improve the programmability, efficiency, and global optimization of network operations, in order to minimize both Capital Expenditure (CAPEX) and Operational Expenditure (OPEX) by reducing the complexity of devices and its operation. Therefore, it makes sense to use an SDN approach in order to manage the passive optical network functionalities and migrating must of the upper layer functions to the SDN controller. Many approaches have already addressed the topic of applying the SDN architecture in PON networks. However; the focus was usually on facilitating the deployment of SDN-based service and so Service Interoperability remains unexplored in detail. The main challenge toward this goal is how to make compatible the synchronous nature of the EPON media access control protocols with the asynchronous architecture of SDN, and in particular, OpenFlow. In our proposed architecture, the OLT is partially virtualized and some of its functionalities are allocated to the core network management system, while the OLT itself is replaced by an OpenFlow switch. A new MultiPoint MAC Control (MPMC) sublayer extension based on the OpenFlow protocol is presented. The OpenFlow switch is extended with synchronous ports to retain the time-critical nature of the EPON network. Our simulation-based results demonstrate the effectiveness of the new architecture, while retaining a similar (or improved) performance in term of delay and throughput when compared to legacy PONs. Nowadays, many researchers are working simultaneously to develop power saving techniques and improves energy efficiency in the PON network, and since the contribution of access networks to the global energy consumption is large, energy efficiency has become an increasingly important requirement in designing access networks. Therefore, energy-saving approaches are being investigated to provide high performance and consume less energy. Several techniques have been proposed to increase energy efficiency in PON networks. Such techniques are related to the centeralized DBA but the advantage of power saving in a distributed DBA remains untouched. We present a distributed energy-efficient Dynamic Bandwidth Allocation (DBA) algorithm for both the upstream and downstream channels of EPON to improve energy efficiency in EPON networks. The proposed algorithm analyzes the queue status of the ONUs and OLT in order to power-off the transmitter and/or receiver of an ONU whenever there is no upstream or downstream traffic. We have been able to combine the advantage of a distributed DBA such as DDSPON (a smaller packet delay, due to the shorter time needed by DDSPON to allocate the transmission slots) and the energy-saving features (that come at a price of longer packet delays due to the fact that switching off the transmitters make the packet queues grow). Our proposed DBA algorithm minimizes the ONU energy consumption across a wide range of network loads, while maintaining at an acceptable level the penalty introduced in terms of channel utilization and packet delay.Las contribuciones de esta tesis se centran en mejorar el sistema de gestión de red y el consumo de energía en redes de acceso ópticas pasivas (PON). Los elementos de las redes PON, como el terminal de línea óptica (OLT) y las unidades de red ópticas (ONU), se gestionan actualmente mediante sistemas poco flexibles. El nuevo paradigma de redes definidas por software (SDN) mejora la gestión de redes al desacoplar el plano de control del plano de datos. Actualmente, la gestión de redes PON no está automatizada ni normalizada. Uno de los objetivos de los investigadores en redes ópticas es mejorar la programabilidad, la eficiencia y la optimización global de las operaciones de red, con el fin de minimizar tanto el gasto de capital (CAPEX) como el gasto operativo (OPEX) al reducir la complejidad de los dispositivos y su funcionamiento. Por lo tanto, tiene sentido utilizar un enfoque SDN para gestionar las funciones de red óptica pasiva y migrar algunas de las funciones PON de capas superiores al controlador SDN. Otros investigadores han estudiado esta aproximación. sin embargo; el enfoque generalmente estaba en facilitar la implementación del servicio basado en SDN y, por lo tanto, la interoperabilidad de los servicios permanecía sin ser explorado en detalle. El principal desafío hacia este objetivo es cómo compatibilizar la naturaleza síncrona de los protocolos de control de acceso a medios EPON con la arquitectura asíncrona de SDN y, en particular, OpenFlow. En nuestra propuesta de arquitectura, la OLT se virtualiza parcialmente y algunas de sus funcionalidades se asignan al sistema de gestión de red centralizado, mientras que la OLT se reemplaza por un conmutador OpenFlow. Proponemos una nueva extensión de la subcapa de control múltiple de MAC (MPMC) basada en el protocolo OpenFlow. El conmutador OpenFlow se amplía con puertos síncronos para asegurar la naturaleza de tiempo real de la red EPON. Nuestros resultados basados ¿¿en simulaciones demuestran la efectividad de la nueva arquitectura, al tiempo que se mantiene un rendimiento similar (o mejorado) en términos de retardos y rendimiento en comparación con las PON clásicas. Por otro lado, se están desarrollando técnicas de ahorro de energía y mejora de la eficiencia energética en redes PON, y dado que la contribución de las redes de acceso al consumo total de energía es importante, la eficiencia energética se ha convertido en un requisito cada vez más importante. Se han propuesto varias técnicas por parte de otros autores para aumentar la eficiencia energética en las redes PON, relacionadas con algoritmos DBA (Dynamic Bandwidth Allocation) centralizados, pero las ventaja del ahorro de energía en un DBA distribuido no se ha explorado todavía. Por ello nuestra segunda contiribución es un algoritmo distribuido de asignación dinámica de ancho de banda energéticamente eficiente tanto para los canales ascendentes como descendentes de EPON para mejorar la eficiencia energética en las redes EPON. El algoritmo propuesto analiza el estado de cola de las ONU y la OLT para apagar el transmisor y/o el receptor de una ONU cuando no hay tráfico en sentido ascendente o descendente. Hemos podido combinar la ventaja de un DBA distribuido como DDSPON (que asegura retardos más pequeños, debido al menor tiempo que DDSPON necesita para asignar las ranuras de transmisión) y las características de ahorro de energía (al precio de tener retardos de paquete más grandes debido al hecho de que apagar los transmisores hace que las colas de paquetes crezcan). Nuestro algoritmo de DBA propuesto minimiza el consumo de energía de la ONU en una amplia gama de cargas de red, mientras mantiene a un nivel aceptable la penalización introducida en términos de utilización del canal y retardos

Contributions towards softwarization and energy saving in passive optical networks

Ths thesis is a result of contributions to optimize and improve the network management systme and power consumption in Passive Optical Network (PON). Passive Optical Network elements such as Optical Line Terminal (OLT) and Optical Network Units (ONUs) are currently managed by inflexible legacy network management systems. Software-Defined Networking (SDN) is a new networking paradigm that improves the operation and management of networks by decoupling control plane from data plane. Currently, network management in PON networks is not always automated nor normalized. One goal of the researchers in optical networking is to improve the programmability, efficiency, and global optimization of network operations, in order to minimize both Capital Expenditure (CAPEX) and Operational Expenditure (OPEX) by reducing the complexity of devices and its operation. Therefore, it makes sense to use an SDN approach in order to manage the passive optical network functionalities and migrating must of the upper layer functions to the SDN controller. Many approaches have already addressed the topic of applying the SDN architecture in PON networks. However; the focus was usually on facilitating the deployment of SDN-based service and so Service Interoperability remains unexplored in detail. The main challenge toward this goal is how to make compatible the synchronous nature of the EPON media access control protocols with the asynchronous architecture of SDN, and in particular, OpenFlow. In our proposed architecture, the OLT is partially virtualized and some of its functionalities are allocated to the core network management system, while the OLT itself is replaced by an OpenFlow switch. A new MultiPoint MAC Control (MPMC) sublayer extension based on the OpenFlow protocol is presented. The OpenFlow switch is extended with synchronous ports to retain the time-critical nature of the EPON network. Our simulation-based results demonstrate the effectiveness of the new architecture, while retaining a similar (or improved) performance in term of delay and throughput when compared to legacy PONs. Nowadays, many researchers are working simultaneously to develop power saving techniques and improves energy efficiency in the PON network, and since the contribution of access networks to the global energy consumption is large, energy efficiency has become an increasingly important requirement in designing access networks. Therefore, energy-saving approaches are being investigated to provide high performance and consume less energy. Several techniques have been proposed to increase energy efficiency in PON networks. Such techniques are related to the centeralized DBA but the advantage of power saving in a distributed DBA remains untouched. We present a distributed energy-efficient Dynamic Bandwidth Allocation (DBA) algorithm for both the upstream and downstream channels of EPON to improve energy efficiency in EPON networks. The proposed algorithm analyzes the queue status of the ONUs and OLT in order to power-off the transmitter and/or receiver of an ONU whenever there is no upstream or downstream traffic. We have been able to combine the advantage of a distributed DBA such as DDSPON (a smaller packet delay, due to the shorter time needed by DDSPON to allocate the transmission slots) and the energy-saving features (that come at a price of longer packet delays due to the fact that switching off the transmitters make the packet queues grow). Our proposed DBA algorithm minimizes the ONU energy consumption across a wide range of network loads, while maintaining at an acceptable level the penalty introduced in terms of channel utilization and packet delay.Las contribuciones de esta tesis se centran en mejorar el sistema de gestión de red y el consumo de energía en redes de acceso ópticas pasivas (PON). Los elementos de las redes PON, como el terminal de línea óptica (OLT) y las unidades de red ópticas (ONU), se gestionan actualmente mediante sistemas poco flexibles. El nuevo paradigma de redes definidas por software (SDN) mejora la gestión de redes al desacoplar el plano de control del plano de datos. Actualmente, la gestión de redes PON no está automatizada ni normalizada. Uno de los objetivos de los investigadores en redes ópticas es mejorar la programabilidad, la eficiencia y la optimización global de las operaciones de red, con el fin de minimizar tanto el gasto de capital (CAPEX) como el gasto operativo (OPEX) al reducir la complejidad de los dispositivos y su funcionamiento. Por lo tanto, tiene sentido utilizar un enfoque SDN para gestionar las funciones de red óptica pasiva y migrar algunas de las funciones PON de capas superiores al controlador SDN. Otros investigadores han estudiado esta aproximación. sin embargo; el enfoque generalmente estaba en facilitar la implementación del servicio basado en SDN y, por lo tanto, la interoperabilidad de los servicios permanecía sin ser explorado en detalle. El principal desafío hacia este objetivo es cómo compatibilizar la naturaleza síncrona de los protocolos de control de acceso a medios EPON con la arquitectura asíncrona de SDN y, en particular, OpenFlow. En nuestra propuesta de arquitectura, la OLT se virtualiza parcialmente y algunas de sus funcionalidades se asignan al sistema de gestión de red centralizado, mientras que la OLT se reemplaza por un conmutador OpenFlow. Proponemos una nueva extensión de la subcapa de control múltiple de MAC (MPMC) basada en el protocolo OpenFlow. El conmutador OpenFlow se amplía con puertos síncronos para asegurar la naturaleza de tiempo real de la red EPON. Nuestros resultados basados ¿¿en simulaciones demuestran la efectividad de la nueva arquitectura, al tiempo que se mantiene un rendimiento similar (o mejorado) en términos de retardos y rendimiento en comparación con las PON clásicas. Por otro lado, se están desarrollando técnicas de ahorro de energía y mejora de la eficiencia energética en redes PON, y dado que la contribución de las redes de acceso al consumo total de energía es importante, la eficiencia energética se ha convertido en un requisito cada vez más importante. Se han propuesto varias técnicas por parte de otros autores para aumentar la eficiencia energética en las redes PON, relacionadas con algoritmos DBA (Dynamic Bandwidth Allocation) centralizados, pero las ventaja del ahorro de energía en un DBA distribuido no se ha explorado todavía. Por ello nuestra segunda contiribución es un algoritmo distribuido de asignación dinámica de ancho de banda energéticamente eficiente tanto para los canales ascendentes como descendentes de EPON para mejorar la eficiencia energética en las redes EPON. El algoritmo propuesto analiza el estado de cola de las ONU y la OLT para apagar el transmisor y/o el receptor de una ONU cuando no hay tráfico en sentido ascendente o descendente. Hemos podido combinar la ventaja de un DBA distribuido como DDSPON (que asegura retardos más pequeños, debido al menor tiempo que DDSPON necesita para asignar las ranuras de transmisión) y las características de ahorro de energía (al precio de tener retardos de paquete más grandes debido al hecho de que apagar los transmisores hace que las colas de paquetes crezcan). Nuestro algoritmo de DBA propuesto minimiza el consumo de energía de la ONU en una amplia gama de cargas de red, mientras mantiene a un nivel aceptable la penalización introducida en términos de utilización del canal y retardos.Postprint (published version

WDM/TDM PON bidirectional networks single-fiber/wavelength RSOA-based ONUs layer 1/2 optimization

This Thesis proposes the design and the optimization of a hybrid WDM/TDM PON at the L1 (PHY) and L2 (MAC) layers, in terms of minimum deployment cost and enhanced performance for Greenfield NGPON. The particular case of RSOA-based ONUs and ODN using a single-fibre/single-wavelength is deeply analysed. In this WDM/TDM PON relevant parameters are optimized. Special attention has been given at the main noise impairment in this type of networks: the Rayleigh Backscattering effect, which cannot be prevented. To understand its behaviour and mitigate its effects, a novel mathematical model for the Rayleigh Backscattering in burst mode transmission is presented for the first time, and it has been used to optimize the WDM/TDM RSOA based PON. Also, a cost-effective, simple design SCM WDM/TDM PON with rSOA-based ONU, was optimized and implemented. This prototype was successfully tested showing high performance, robustness, versatility and reliability. So, the system is able to give coverage up to 1280 users at 2.5 Gb/s / 1.25 Gb/s downstream/upstream, over 20 Km, and being compatible with the GPON ITU-T recommendation. This precedent has enabled the SARDANA network to extend the design, architecture and capabilities of a WDM/TDM PON for a long reach metro-access network (100 km). A proposal for an agile Transmission Convergence sub-layer is presented as another relevant contribution of this work. It is based on the optimization of the standards GPON and XG-PON (for compatibility), but applied to a long reach metro-access TDM/WDM PON rSOA-based network with higher client count. Finally, a proposal of physical implementation for the SARDANA layer 2 and possible configurations for SARDANA internetworking, with the metro network and core transport network, are presented

Burst-mode electronic dispersion compensation in long reach PONs

Long reach passive optical networks (LR-PONs), which integrate fibre-to-the-home with metro networks, have been the subject of intensive research in recent years and are considered one of the most promising candidates for the next generation of optical access networks. Such systems ideally have reaches greater than 100km and bit rates of at least 10Gb/s per wavelength in the downstream and upstream directions. Due to the limited equipment sharing that is possible in access networks, the laser transmitters in the terminal units, which are usually the most expensive components, must be as cheap as possible. However, the requirement for low cost is generally incompatible with the need for a transmitter chirp characteristic that is optimised for such long reaches at 10Gb/s, and hence dispersion compensation is required. In this thesis electronic dispersion compensation (EDC) techniques are employed to increase the chromatic dispersion tolerance and to enhance the system performance at the expense of moderate additional implementation complexity. In order to use such EDC in LR-PON architectures, a number of challenges associated with the burst-mode nature of the upstream link need to be overcome. In particular, the EDC must be made adaptive from one burst to the next (burst-mode EDC, or BM-EDC) in time scales on the order of tens to hundreds of nanoseconds. Burst-mode operation of EDC has received little attention to date. The main objective of this thesis is to demonstrate the feasibility of such a concept and to identify the key BM-EDC design parameters required for applications in a 10Gb/s burst-mode link. This is achieved through a combination of simulations and transmission experiments utilising off-line data processing. The research shows that burst-to-burst adaptation can in principle be implemented efficiently, opening the possibility of low overhead, adaptive EDC-enabled burst-mode systems