Shared Memory Implementations of Synchronous Dataflow Specifications Using Lifetime Analysis Techniques

There has been a proliferation of block-diagram environments for specifying and prototyping DSP systems. These include tools from academia like Ptolemy [6], and commercial tools like SPW from Cadence Design Systems, and Cossap from Synopsys. The block diagram languages used in these environments are usually based on dataflow semantics because various subsets of dataflow have proven to be good matches for expressing and modeling signal processing systems. In particular, synchronous dataflow (SDF)[14] has been found to be a particularly good match for expressing multirate signal processing systems [5]. One of the key problems that arises during synthesis from an SDF specification is scheduling. Past work on scheduling [3] from SDF has focused on optimization of program memory and buffer memory. However, in [3], no attempt was made for overlaying or sharing buffers. In this paper, we formally tackle the problem of generating optimally compact schedules for SDF graphs, that also attempt to minimize buffering mem- ory under the assumption that buffers will be shared. This will result in schedules whose data memory usage is drastically lower than methods in the past have achieved. The method we use is that of lifetime analysis; we develop a model for buffer lifetimes in SDF graphs, and develop scheduling algorithms that attempt to generate schedules that minimize the maximum number of live tokens under the particular buffer lifetime model. We develop several efficient algorithms for extracting the relevant lifetimes from the SDF schedule. We then use the firstfit heuristic for packing arrays efficiently into memory. We report extensive experimental results on applying these techniques to several practical SDF systems, and show improvements that average 50% over previous techniques, with some systems exhibiting upto an 83% improvement over previous techniques. Also cross-referenced as UMIACS-TR-99-3

Toward Sequentializing Overparallelized Protocol Code

In our ongoing work, we use constraint automata to compile protocol specifications expressed as Reo connectors into efficient executable code, e.g., in C. We have by now studied this automata based compilation approach rather well, and have devised effective solutions to some of its problems. Because our approach is based on constraint automata, the approach, its problems, and our solutions are in fact useful and relevant well beyond the specific case of compiling Reo. In this short paper, we identify and analyze two such rather unexpected problems.Comment: In Proceedings ICE 2014, arXiv:1410.701

Modeling and Mapping of Optimized Schedules for Embedded Signal Processing Systems

The demand for Digital Signal Processing (DSP) in embedded systems has been increasing rapidly due to the proliferation of multimedia- and communication-intensive devices such as pervasive tablets and smart phones. Efficient implementation of embedded DSP systems requires integration of diverse hardware and software components, as well as dynamic workload distribution across heterogeneous computational resources. The former implies increased complexity of application modeling and analysis, but also brings enhanced potential for achieving improved energy consumption, cost or performance. The latter results from the increased use of dynamic behavior in embedded DSP applications. Furthermore, parallel programming is highly relevant in many embedded DSP areas due to the development and use of Multiprocessor System-On-Chip (MPSoC) technology. The need for efficient cooperation among different devices supporting diverse parallel embedded computations motivates high-level modeling that expresses dynamic signal processing behaviors and supports efficient task scheduling and hardware mapping. Starting with dynamic modeling, this thesis develops a systematic design methodology that supports functional simulation and hardware mapping of dynamic reconfiguration based on Parameterized Synchronous Dataflow (PSDF) graphs. By building on the DIF (Dataflow Interchange Format), which is a design language and associated software package for developing and experimenting with dataflow-based design techniques for signal processing systems, we have developed a novel tool for functional simulation of PSDF specifications. This simulation tool allows designers to model applications in PSDF and simulate their functionality, including use of the dynamic parameter reconfiguration capabilities offered by PSDF. With the help of this simulation tool, our design methodology helps to map PSDF specifications into efficient implementations on field programmable gate arrays (FPGAs). Furthermore, valid schedules can be derived from the PSDF models at runtime to adapt hardware configurations based on changing data characteristics or operational requirements. Under certain conditions, efficient quasi-static schedules can be applied to reduce overhead and enhance predictability in the scheduling process. Motivated by the fact that scheduling is critical to performance and to efficient use of dynamic reconfiguration, we have focused on a methodology for schedule design, which complements the emphasis on automated schedule construction in the existing literature on dataflow-based design and implementation. In particular, we have proposed a dataflow-based schedule design framework called the dataflow schedule graph (DSG), which provides a graphical framework for schedule construction based on dataflow semantics, and can also be used as an intermediate representation target for automated schedule generation. Our approach to applying the DSG in this thesis emphasizes schedule construction as a design process rather than an outcome of the synthesis process. Our approach employs dataflow graphs for representing both application models and schedules that are derived from them. By providing a dataflow-integrated framework for unambiguously representing, analyzing, manipulating, and interchanging schedules, the DSG facilitates effective codesign of dataflow-based application models and schedules for execution of these models. As multicore processors are deployed in an increasing variety of embedded image processing systems, effective utilization of resources such as multiprocessor systemon-chip (MPSoC) devices, and effective handling of implementation concerns such as memory management and I/O become critical to developing efficient embedded implementations. However, the diversity and complexity of applications and architectures in embedded image processing systems make the mapping of applications onto MPSoCs difficult. We help to address this challenge through a structured design methodology that is built upon the DSG modeling framework. We refer to this methodology as the DEIPS methodology (DSG-based design and implementation of Embedded Image Processing Systems). The DEIPS methodology provides a unified framework for joint consideration of DSG structures and the application graphs from which they are derived, which allows designers to integrate considerations of parallelization and resource constraints together with the application modeling process. We demonstrate the DEIPS methodology through cases studies on practical embedded image processing systems

MULTI-SCALE SCHEDULING TECHNIQUES FOR SIGNAL PROCESSING SYSTEMS

A variety of hardware platforms for signal processing has emerged, from distributed systems such as Wireless Sensor Networks (WSNs) to parallel systems such as Multicore Programmable Digital Signal Processors (PDSPs), Multicore General Purpose Processors (GPPs), and Graphics Processing Units (GPUs) to heterogeneous combinations of parallel and distributed devices. When a signal processing application is implemented on one of those platforms, the performance critically depends on the scheduling techniques, which in general allocate computation and communication resources for competing processing tasks in the application to optimize performance metrics such as power consumption, throughput, latency, and accuracy. Signal processing systems implemented on such platforms typically involve multiple levels of processing and communication hierarchy, such as network-level, chip-level, and processor-level in a structural context, and application-level, subsystem-level, component-level, and operation- or instruction-level in a behavioral context. In this thesis, we target scheduling issues that carefully address and integrate scheduling considerations at different levels of these structural and behavioral hierarchies. The core contributions of the thesis include the following. Considering both the network-level and chip-level, we have proposed an adaptive scheduling algorithm for wireless sensor networks (WSNs) designed for event detection. Our algorithm exploits discrepancies among the detection accuracy of individual sensors, which are derived from a collaborative training process, to allow each sensor to operate in a more energy efficient manner while the network satisfies given constraints on overall detection accuracy. Considering the chip-level and processor-level, we incorporated both temperature and process variations to develop new scheduling methods for throughput maximization on multicore processors. In particular, we studied how to process a large number of threads with high speed and without violating a given maximum temperature constraint. We targeted our methods to multicore processors in which the cores may operate at different frequencies and different levels of leakage. We develop speed selection and thread assignment schedulers based on the notion of a core's steady state temperature. Considering the application-level, component-level and operation-level, we developed a new dataflow based design flow within the targeted dataflow interchange format (TDIF) design tool. Our new multiprocessor system-on-chip (MPSoC)-oriented design flow, called TDIF-PPG, is geared towards analysis and mapping of embedded DSP applications on MPSoCs. An important feature of TDIF-PPG is its capability to integrate graph level parallelism and actor level parallelism into the application mapping process. Here, graph level parallelism is exposed by the dataflow graph application representation in TDIF, and actor level parallelism is modeled by a novel model for multiprocessor dataflow graph implementation that we call the Parallel Processing Group (PPG) model. Building on the contribution above, we formulated a new type of parallel task scheduling problem called Parallel Actor Scheduling (PAS) for chip-level MPSoC mapping of DSP systems that are represented as synchronous dataflow (SDF) graphs. In contrast to traditional SDF-based scheduling techniques, which focus on exploiting graph level (inter-actor) parallelism, the PAS problem targets the integrated exploitation of both intra- and inter-actor parallelism for platforms in which individual actors can be parallelized across multiple processing units. We address a special case of the PAS problem in which all of the actors in the DSP application or subsystem being optimized can be parallelized. For this special case, we develop and experimentally evaluate a two-phase scheduling framework with three work flows --- particle swarm optimization with a mixed integer programming formulation, particle swarm optimization with a simulated annealing engine, and particle swarm optimization with a fast heuristic based on list scheduling. Then, we extend our scheduling framework to support general PAS problem which considers the actors cannot be parallelized

Overview of the MPEG Reconfigurable Video Coding Framework

International audienceVideo coding technology in the last 20 years has evolved producing a variety of different and complex algorithms and coding standards. So far the specification of such standards, and of the algorithms that build them, has been done case by case providing monolithic textual and reference software specifications in different forms and programming languages. However, very little attention has been given to provide a specification formalism that explicitly presents common components between standards, and the incremental modifications of such monolithic standards. The MPEG Reconfigurable Video Coding (RVC) framework is a new ISO standard currently under its final stage of standardization, aiming at providing video codec specifications at the level of library components instead of monolithic algorithms. The new concept is to be able to specify a decoder of an existing standard or a completely new configuration that may better satisfy application-specific constraints by selecting standard components from a library of standard coding algorithms. The possibility of dynamic configuration and reconfiguration of codecs also requires new methodologies and new tools for describing the new bitstream syntaxes and the parsers of such new codecs. The RVC framework is based on the usage of a new actor/ dataflow oriented language called CAL for the specification of the standard library and instantiation of the RVC decoder model. This language has been specifically designed for modeling complex signal processing systems. CAL dataflow models expose the intrinsic concurrency of the algorithms by employing the notions of actor programming and dataflow. The paper gives an overview of the concepts and technologies building the standard RVC framework and the non standard tools supporting the RVC model from the instantiation and simulation of the CAL model to software and/or hardware code synthesis

SCALABLE TECHNIQUES FOR SCHEDULING AND MAPPING DSP APPLICATIONS ONTO EMBEDDED MULTIPROCESSOR PLATFORMS

A variety of multiprocessor architectures has proliferated even for off-the-shelf computing platforms. To make use of these platforms, traditional implementation frameworks focus on implementing Digital Signal Processing (DSP) applications using special platform features to achieve high performance. However, due to the fast evolution of the underlying architectures, solution redevelopment is error prone and re-usability of existing solutions and libraries is limited. In this thesis, we facilitate an efficient migration of DSP systems to multiprocessor platforms while systematically leveraging previous investment in optimized library kernels using dataflow design frameworks. We make these library elements, which are typically tailored to specialized architectures, more amenable to extensive analysis and optimization using an efficient and systematic process. In this thesis we provide techniques to allow such migration through four basic contributions: 1. We propose and develop a framework to explore efficient utilization of Single Instruction Multiple Data (SIMD) cores and accelerators available in heterogeneous multiprocessor platforms consisting of General Purpose Processors (GPPs) and Graphics Processing Units (GPUs). We also propose new scheduling techniques by applying extensive block processing in conjunction with appropriate task mapping and task ordering methods that match efficiently with the underlying architecture. The approach gives the developer the ability to prototype a GPU-accelerated application and explore its design space efficiently and effectively. 2. We introduce the concept of Partial Expansion Graphs (PEGs) as an implementation model and associated class of scheduling strategies. PEGs are designed to help realize DSP systems in terms of forms and granularities of parallelism that are well matched to the given applications and targeted platforms. PEGs also facilitate derivation of both static and dynamic scheduling techniques, depending on the amount of variability in task execution times and other operating conditions. We show how to implement efficient PEG-based scheduling methods using real time operating systems, and to re-use pre-optimized libraries of DSP components within such implementations. 3. We develop new algorithms for scheduling and mapping systems implemented using PEGs. Collectively, these algorithms operate in three steps. First, the amount of data parallelism in the application graph is tuned systematically over many iterations to profit from the available cores in the target platform. Then a mapping algorithm that uses graph analysis is developed to distribute data and task parallel instances over different cores while trying to balance the load of all processing units to make use of pipeline parallelism. Finally, we use a novel technique for performance evaluation by implementing the scheduler and a customizable solution on the programmable platform. This allows accurate fitness functions to be measured and used to drive runtime adaptation of schedules. 4. In addition to providing scheduling techniques for the mentioned applications and platforms, we also show how to integrate the resulting solution in the underlying environment. This is achieved by leveraging existing libraries and applying the GPP-GPU scheduling framework to augment a popular existing Software Defined Radio (SDR) development environment -- GNU Radio -- with a dataflow foundation and a stand-alone GPU-accelerated library. We also show how to realize the PEG model on real time operating system libraries, such as the Texas Instruments DSP/BIOS. A code generator that accepts a manual system designer solution as well as automatically configured solutions is provided to complete the design flow starting from application model to running system

Efficiently and Transparently Maintaining High SIMD Occupancy in the Presence of Wavefront Irregularity

Demand is increasing for high throughput processing of irregular streaming applications; examples of such applications from scientific and engineering domains include biological sequence alignment, network packet filtering, automated face detection, and big graph algorithms. With wide SIMD, lightweight threads, and low-cost thread-context switching, wide-SIMD architectures such as GPUs allow considerable flexibility in the way application work is assigned to threads. However, irregular applications are challenging to map efficiently onto wide SIMD because data-dependent filtering or replication of items creates an unpredictable data wavefront of items ready for further processing. Straightforward implementations of irregular applications on a wide-SIMD architecture are prone to load imbalance and reduced occupancy, while more sophisticated implementations require advanced use of parallel GPU operations to redistribute work efficiently among threads. This dissertation will present strategies for addressing the performance challenges of wavefront- irregular applications on wide-SIMD architectures. These strategies are embodied in a developer framework called Mercator that (1) allows developers to map irregular applications onto GPUs ac- cording to the streaming paradigm while abstracting from low-level data movement and (2) includes generalized techniques for transparently overcoming the obstacles to high throughput presented by wavefront-irregular applications on a GPU. Mercator forms the centerpiece of this dissertation, and we present its motivation, performance model, implementation, and extensions in this work

Toolflows for Mapping Convolutional Neural Networks on FPGAs: A Survey and Future Directions

In the past decade, Convolutional Neural Networks (CNNs) have demonstrated state-of-the-art performance in various Artificial Intelligence tasks. To accelerate the experimentation and development of CNNs, several software frameworks have been released, primarily targeting power-hungry CPUs and GPUs. In this context, reconfigurable hardware in the form of FPGAs constitutes a potential alternative platform that can be integrated in the existing deep learning ecosystem to provide a tunable balance between performance, power consumption and programmability. In this paper, a survey of the existing CNN-to-FPGA toolflows is presented, comprising a comparative study of their key characteristics which include the supported applications, architectural choices, design space exploration methods and achieved performance. Moreover, major challenges and objectives introduced by the latest trends in CNN algorithmic research are identified and presented. Finally, a uniform evaluation methodology is proposed, aiming at the comprehensive, complete and in-depth evaluation of CNN-to-FPGA toolflows.Comment: Accepted for publication at the ACM Computing Surveys (CSUR) journal, 201