Investigation of dynamic three-dimensional tangible touchscreens: Usability and feasibility

The ability for touchscreen controls to move from two physical dimensions to three dimensions may soon be possible. Though solutions exist for enhanced tactile touchscreen interaction using vibrotactile devices, no definitive commercial solution yet exists for providing real, physical shape to the virtual buttons on a touchscreen display. Of the many next steps in interface technology, this paper concentrates on the path leading to tangible, dynamic, touchscreen surfaces. An experiment was performed that explores the usage differences between a flat surface touchscreen and one augmented with raised surface controls. The results were mixed. The combination of tactile-visual modalities had a negative effect on task completion time when visual attention was focused on a single task (single target task time increased by 8% and the serial target task time increased by 6%). On the other hand, the dual modality had a positive effect on error rate when visual attention was divided between two tasks (the serial target error rate decreased by 50%). In addition to the experiment, this study also investigated the feasibility of creating a dynamic, three dimensional, tangible touchscreen. A new interface solution may be possible by inverting the traditional touchscreen architecture and integrating emerging technologies such as organic light emitting diode (OLED) displays and electrorheological fluid based tactile pins

Tactile Arrays for Virtual Textures

This thesis describes the development of three new tactile stimulators for active touch, i.e. devices to deliver virtual touch stimuli to the fingertip in response to exploratory movements by the user. All three stimulators are designed to provide spatiotemporal patterns of mechanical input to the skin via an array of contactors, each under individual computer control. Drive mechanisms are based on piezoelectric bimorphs in a cantilever geometry. The first of these is a 25-contactor array (5 × 5 contactors at 2 mm spacing). It is a rugged design with a compact drive system and is capable of producing strong stimuli when running from low voltage supplies. Combined with a PC mouse, it can be used for active exploration tasks. Pilot studies were performed which demonstrated that subjects could successfully use the device for discrimination of line orientation, simple shape identification and line following tasks. A 24-contactor stimulator (6 × 4 contactors at 2 mm spacing) with improved bandwidth was then developed. This features control electronics designed to transmit arbitrary waveforms to each channel (generated on-the-fly, in real time) and software for rapid development of experiments. It is built around a graphics tablet, giving high precision position capability over a large 2D workspace. Experiments using two-component stimuli (components at 40 Hz and 320 Hz) indicate that spectral balance within active stimuli is discriminable independent of overall intensity, and that the spatial variation (texture) within the target is easier to detect at 320 Hz that at 40 Hz. The third system developed (again 6 × 4 contactors at 2 mm spacing) was a lightweight modular stimulator developed for fingertip and thumb grasping tasks; furthermore it was integrated with force-feedback on each digit and a complex graphical display, forming a multi-modal Virtual Reality device for the display of virtual textiles. It is capable of broadband stimulation with real-time generated outputs derived from a physical model of the fabric surface. In an evaluation study, virtual textiles generated from physical measurements of real textiles were ranked in categories reflecting key mechanical and textural properties. The results were compared with a similar study performed on the real fabrics from which the virtual textiles had been derived. There was good agreement between the ratings of the virtual textiles and the real textiles, indicating that the virtual textiles are a good representation of the real textiles and that the system is delivering appropriate cues to the user

Designing a New Tactile Display Technology and its Disability Interactions

People with visual impairments have a strong desire for a refreshable tactile interface that can provide immediate access to full page of Braille and tactile graphics. Regrettably, existing devices come at a considerable expense and remain out of reach for many. The exorbitant costs associated with current tactile displays stem from their intricate design and the multitude of components needed for their construction. This underscores the pressing need for technological innovation that can enhance tactile displays, making them more accessible and available to individuals with visual impairments. This research thesis delves into the development of a novel tactile display technology known as Tacilia. This technology's necessity and prerequisites are informed by in-depth qualitative engagements with students who have visual impairments, alongside a systematic analysis of the prevailing architectures underpinning existing tactile display technologies. The evolution of Tacilia unfolds through iterative processes encompassing conceptualisation, prototyping, and evaluation. With Tacilia, three distinct products and interactive experiences are explored, empowering individuals to manually draw tactile graphics, generate digitally designed media through printing, and display these creations on a dynamic pin array display. This innovation underscores Tacilia's capability to streamline the creation of refreshable tactile displays, rendering them more fitting, usable, and economically viable for people with visual impairments

Modelling of surface identifying characteristics using Fourier series

Texture and small-scale surface details are widely recognised as playing an important role in the haptic identification of objects. In order to simulate realistic textures in haptic virtual environments, it has become increasingly necessary to identify a robust technique for modelling of surface profiles. This paper describes a method whereby Fourier series spectral analysis is employed in order to describe the measured surface profiles of several characteristic surfaces. The results presented suggest that a bandlimited Fourier series can be used to provide a realistic approximation to surface amplitude profiles

The tactile sense as a mechanism for the reduction of visual load elicited by control interactions : an automotive case study approach to the development of generic design recommendations

This thesis examines the potential for using tactile feedback to reduce the visual load that can be associated with interacting with controls. Using the automotive context as a case study, the thesis describes the process followed in the design of a prototype tactile interface (PTI) for the control of in-car secondary functionality (navigation, entertainment and climate control). There have been many examples of the use of active and passive tactile feedback to provide information to visually impaired people. There is however a paucity of previous research into the field of tactile feedback in mainstream product design. A literature review was performed examining various issues that are associated with tactile design including cognitive processing of tactile inputs, the use oftactile feedback in products used by visually impaired people and standard control design recommendations. This was followed by the generation of initial concepts and the first study, which examined how visually impaired people interact with electronic products that are unfamiliar to them, and also examined how they used their own equipment. The results from this study, and the literature review findings were combined into a series of design recommendations for the production of tactile interfaces that aim to reduce the visual load on the driver. These design recommendations were the basis for an iterative design process that resulted in the first, non functioning PTI interface model. The first PTI was constructed using rapid prototype technologies. The first iteration PTI was examined in the second study, a user trial in a driving simulator. The study produced encouraging results with a >90% success rate for correct control selection without vision, whilst performing a driving task. The results from this study were used to refine the design of the PTI and a working, hi-fidelity prototype was constructed for use in the final study. This study involved 'on the road' user trials comparing the glance durations made to the PTI and to a baseline system using a 'repeated measures' structure. The data from these user trials were examined to determine if the PTI exhibited a reduced visual load when compared to the baseline system. The results showed the PTI fostered significantly reduced summed glance durations for 7 of the 11 tasks performed when compared to the baseline system. Three of the 11 tasks that were performed in the study produced a reduction of summed glance duration of >50%. The PTI was also shown to foster non-visual interaction, with all participants performing at least one control interaction without looking at the control arrays. The tactile coding and symbolic layout of the PTI have been shown to be beneficial in terms of reducing 'eyes off road time' and therefore reducing the risk of distraction related accidents. A review of the results from the three studies described in this thesis has enabled the development of generic design guidelines for the production of tactile interfaces where a reduction in visual load is required for the safety of the operator. The thesis has made a contribution to the understanding of the use of the tactile sense during product interactions, and highlighting the benefits as well as the limitations of the tactile sense as a feedback mechanism

Touch- and Walkable Virtual Reality to Support Blind and Visually Impaired Peoples‘ Building Exploration in the Context of Orientation and Mobility

Der Zugang zu digitalen Inhalten und Informationen wird immer wichtiger für eine erfolgreiche Teilnahme an der heutigen, zunehmend digitalisierten Zivilgesellschaft. Solche Informationen werden meist visuell präsentiert, was den Zugang für blinde und sehbehinderte Menschen einschränkt. Die grundlegendste Barriere ist oft die elementare Orientierung und Mobilität (und folglich die soziale Mobilität), einschließlich der Erlangung von Kenntnissen über unbekannte Gebäude vor deren Besuch. Um solche Barrieren zu überbrücken, sollten technische Hilfsmittel entwickelt und eingesetzt werden. Es ist ein Kompromiss zwischen technologisch niedrigschwellig zugänglichen und verbreitbaren Hilfsmitteln und interaktiv-adaptiven, aber komplexen Systemen erforderlich. Die Anpassung der Technologie der virtuellen Realität (VR) umfasst ein breites Spektrum an Entwicklungs- und Entscheidungsoptionen. Die Hauptvorteile der VR-Technologie sind die erhöhte Interaktivität, die Aktualisierbarkeit und die Möglichkeit, virtuelle Räume und Modelle als Abbilder von realen Räumen zu erkunden, ohne dass reale Gefahren und die begrenzte Verfügbarkeit von sehenden Helfern auftreten. Virtuelle Objekte und Umgebungen haben jedoch keine physische Beschaffenheit. Ziel dieser Arbeit ist es daher zu erforschen, welche VR-Interaktionsformen sinnvoll sind (d.h. ein angemessenes Verbreitungspotenzial bieten), um virtuelle Repräsentationen realer Gebäude im Kontext von Orientierung und Mobilität berührbar oder begehbar zu machen. Obwohl es bereits inhaltlich und technisch disjunkte Entwicklungen und Evaluationen zur VR-Technologie gibt, fehlt es an empirischer Evidenz. Zusätzlich bietet diese Arbeit einen Überblick über die verschiedenen Interaktionen. Nach einer Betrachtung der menschlichen Physiologie, Hilfsmittel (z.B. taktile Karten) und technologischen Eigenschaften wird der aktuelle Stand der Technik von VR vorgestellt und die Anwendung für blinde und sehbehinderte Nutzer und der Weg dorthin durch die Einführung einer neuartigen Taxonomie diskutiert. Neben der Interaktion selbst werden Merkmale des Nutzers und des Geräts, der Anwendungskontext oder die nutzerzentrierte Entwicklung bzw. Evaluation als Klassifikatoren herangezogen. Begründet und motiviert werden die folgenden Kapitel durch explorative Ansätze, d.h. im Bereich 'small scale' (mit sogenannten Datenhandschuhen) und im Bereich 'large scale' (mit einer avatargesteuerten VR-Fortbewegung). Die folgenden Kapitel führen empirische Studien mit blinden und sehbehinderten Nutzern durch und geben einen formativen Einblick, wie virtuelle Objekte in Reichweite der Hände mit haptischem Feedback erfasst werden können und wie verschiedene Arten der VR-Fortbewegung zur Erkundung virtueller Umgebungen eingesetzt werden können. Daraus werden geräteunabhängige technologische Möglichkeiten und auch Herausforderungen für weitere Verbesserungen abgeleitet. Auf der Grundlage dieser Erkenntnisse kann sich die weitere Forschung auf Aspekte wie die spezifische Gestaltung interaktiver Elemente, zeitlich und räumlich kollaborative Anwendungsszenarien und die Evaluation eines gesamten Anwendungsworkflows (d.h. Scannen der realen Umgebung und virtuelle Erkundung zu Trainingszwecken sowie die Gestaltung der gesamten Anwendung in einer langfristig barrierefreien Weise) konzentrieren.Access to digital content and information is becoming increasingly important for successful participation in today's increasingly digitized civil society. Such information is mostly presented visually, which restricts access for blind and visually impaired people. The most fundamental barrier is often basic orientation and mobility (and consequently, social mobility), including gaining knowledge about unknown buildings before visiting them. To bridge such barriers, technological aids should be developed and deployed. A trade-off is needed between technologically low-threshold accessible and disseminable aids and interactive-adaptive but complex systems. The adaptation of virtual reality (VR) technology spans a wide range of development and decision options. The main benefits of VR technology are increased interactivity, updatability, and the possibility to explore virtual spaces as proxies of real ones without real-world hazards and the limited availability of sighted assistants. However, virtual objects and environments have no physicality. Therefore, this thesis aims to research which VR interaction forms are reasonable (i.e., offering a reasonable dissemination potential) to make virtual representations of real buildings touchable or walkable in the context of orientation and mobility. Although there are already content and technology disjunctive developments and evaluations on VR technology, there is a lack of empirical evidence. Additionally, this thesis provides a survey between different interactions. Having considered the human physiology, assistive media (e.g., tactile maps), and technological characteristics, the current state of the art of VR is introduced, and the application for blind and visually impaired users and the way to get there is discussed by introducing a novel taxonomy. In addition to the interaction itself, characteristics of the user and the device, the application context, or the user-centered development respectively evaluation are used as classifiers. Thus, the following chapters are justified and motivated by explorative approaches, i.e., in the group of 'small scale' (using so-called data gloves) and in the scale of 'large scale' (using an avatar-controlled VR locomotion) approaches. The following chapters conduct empirical studies with blind and visually impaired users and give formative insight into how virtual objects within hands' reach can be grasped using haptic feedback and how different kinds of VR locomotion implementation can be applied to explore virtual environments. Thus, device-independent technological possibilities and also challenges for further improvements are derived. On the basis of this knowledge, subsequent research can be focused on aspects such as the specific design of interactive elements, temporally and spatially collaborative application scenarios, and the evaluation of an entire application workflow (i.e., scanning the real environment and exploring it virtually for training purposes, as well as designing the entire application in a long-term accessible manner)

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility

Doctor of Philosophy

dissertationThe study of haptic interfaces focuses on the use of the sense of touch in human-machine interaction. This document presents a detailed investigation of lateral skin stretch at the fingertip as a means of direction communication. Such tactile communication has applications in a variety of situations where traditional audio and visual channels are inconvenient, unsafe, or already saturated. Examples include handheld consumer electronics, where tactile communication would allow a user to control a device without having to look at it, or in-car navigation systems, where the audio and visual directions provided by existing GPS devices can distract the driver's attention away from the road. Lateral skin stretch, the displacement of the skin of the fingerpad in a plane tangent to the fingerpad, is a highly effective means of communicating directional information. Users are able to correctly identify the direction of skin stretch stimuli with skin displacements as small as 0.1 mm at rates as slow as 2 mm/s. Such stimuli can be rendered by a small, portable device suitable for integration into handheld devices. The design of the device-finger interface affects the ability of the user to perceive the stimuli accurately. A properly designed conical aperture effectively constrains the motion of the finger and provides an interface that is practical for use in handheld devices. When a handheld device renders directional tactile cues on the fingerpad, the user must often mentally rotate those cues from the reference frame of the finger to the world-centered reference frame where those cues are to be applied. Such mental rotation incurs a cognitive cost, requiring additional time to mentally process the stimuli. The magnitude of these cognitive costs is a function of the angle of rotation, and of the specific orientations of the arm, wrist and finger. Even with the difficulties imposed by required mental rotations, lateral skin stretch is a promising means of communicating information using the sense of touch with potential to substantially improve certain types of human-machine interaction