Detection of osteoporosis in lumbar spine [L1-L4] trabecular bone: a review article

The human bones are categorized based on elemental micro architecture and porosity. The porosity of the inner trabecular bone is high that is 40-95% and the nature of the bone is soft and spongy where as the cortical bone is harder and is less porous that is 5 to 15%. Osteoporosis is a disease that normally affects women usually after their menopause. It largely causes mild bone fractures and further stages lead to the demise of an individual. This analysis is on the basis of bone mineral density (BMD) standards obtained through a variety of scientific methods experimented from different skeletal regions. The detection of osteoporosis in lumbar spine has been widely recognized as a promising way to frequent fractures. Therefore, premature analysis of osteoporosis will estimate the risk of the bone fracture which prevents life threats. This paper focuses on the advanced technology in imaging systems and fracture probability analysis of osteoporosis detection. The various segmentation techniques are explored to examine osteoporosis in particular region of the image and further significant attributes are extracted using different methods to classify normal and abnormal (osteoporotic) bones. The limitations of the reviewed papers are more in feature dimensions, lesser accuracy and expensive imaging modalities like computed tomography (CT), magnetic resonance imaging (MRI), and DEXA. To overcome these limitations it is suggested to have less feature dimensions, more accuracy and cost-effective imaging modality like X-ray. This is required to avoid bone fractures and to improve BMD with precision which further helps in the diagnosis of osteoporosis

AGREEMENT ON MRI DIAGNOSIS IN COMPRESSIVE MALIGNANT VERTEBRAL FRACTURES

ABSTRACT Objective: Verify interobserver and intraobserver agreement of malignant compressive vertebral fractures (MCVF) diagnosis using magnetic resonance imaging (MRI). Methods: We retrospectively included a lumbar spine MRI of 63 patients with non-traumatic compressive vertebral fracture diagnoses. Each lumbar vertebra was classified as: without fracture, with fracture of benign characteristics, or with fracture of malignant characteristics. Two medical residents in radiology, one musculoskeletal radiologist fellow, one musculoskeletal radiologist, and two spine surgeons evaluated MRI exams, independently and blindly. Each observer performed two readings, with a 15-day interval between evaluations. A simple Kappa coefficient was used to calculate the intra and interobserver agreement. The reference standard classification was based on bone biopsy or clinical, and imaging follow-up of at least two years, for diagnostic performance analysis. Diagnostic performance was assessed by calculating sensitivity, specificity, accuracy, and positive and negative predictive values with a 95% confidence interval (CI). Results: We observed substantial to perfect intraobserver agreement (kappa: 0.80 to 1.00) and substantial interobserver agreement (kappa 0.64 to 0.77). In general, the sensitivity for the detection of MCVF was moderate, except for the second-year radiology resident that achieved a lower sensitivity. The specificity, accuracy, and negative predictive value were high for all observers. Conclusion: MCVF diagnosis using MRI showed substantial interobserver agreement. The second-year medical resident achieved lower sensitivity but high specificity for MCVF. Regarding the seniors, there was no statistical significance between spine surgeons and the musculoskeletal radiologist. Level of Evidence III; Diagnostic

Diffusion-weighted MRI radiomics of spine bone tumors: feature stability and machine learning-based classification performance

Purpose To evaluate stability and machine learning-based classification performance of radiomic features of spine bone tumors using diffusion- and T2-weighted magnetic resonance imaging (MRI). Material and methods This retrospective study included 101 patients with histology-proven spine bone tumor (22 benign; 38 primary malignant; 41 metastatic). All tumor volumes were manually segmented on morphologic T2-weighted sequences. The same region of interest (ROI) was used to perform radiomic analysis on ADC map. A total of 1702 radiomic features was considered. Feature stability was assessed through small geometrical transformations of the ROIs mimicking multiple manual delineations. Intraclass correlation coefficient (ICC) quantified feature stability. Feature selection consisted of stability-based (ICC > 0.75) and significance-based selections (ranking features by decreasing Mann-Whitney p-value). Class balancing was performed to oversample the minority (i.e., benign) class. Selected features were used to train and test a support vector machine (SVM) to discriminate benign from malignant spine tumors using tenfold cross-validation. Results A total of 76.4% radiomic features were stable. The quality metrics for the SVM were evaluated as a function of the number of selected features. The radiomic model with the best performance and the lowest number of features for classifying tumor types included 8 features. The metrics were 78% sensitivity, 68% specificity, 76% accuracy and AUC 0.78. Conclusion SVM classifiers based on radiomic features extracted from T2- and diffusion-weighted imaging with ADC map are promising for classification of spine bone tumors. Radiomic features of spine bone tumors show good reproducibility rates

BGrowth: an efficient approach for the segmentation of vertebral compression fractures in magnetic resonance imaging

Segmentation of medical images is a critical issue: several process of analysis and classification rely on this segmentation. With the growing number of people presenting back pain and problems related to it, the automatic or semi-automatic segmentation of fractured vertebral bodies became a challenging task. In general, those fractures present several regions with non-homogeneous intensities and the dark regions are quite similar to the structures nearby. Aimed at overriding this challenge, in this paper we present a semi-automatic segmentation method, called Balanced Growth (BGrowth). The experimental results on a dataset with 102 crushed and 89 normal vertebrae show that our approach significantly outperforms well-known methods from the literature. We have achieved an accuracy up to 95% while keeping acceptable processing time performance, that is equivalent to the state-of-the-artmethods. Moreover, BGrowth presents the best results even with a rough (sloppy) manual annotation (seed points).Comment: This is a pre-print of an article published in Symposium on Applied Computing. The final authenticated version is available online at https://doi.org/10.1145/3297280.329972

Fusion and Analysis of Multidimensional Medical Image Data

Analýza medicínských obrazů je předmětem základního výzkumu již řadu let. Za tu dobu bylo v této oblasti publikováno mnoho výzkumných prací zabývajících se dílčími částmi jako je rekonstrukce obrazů, restaurace, segmentace, klasifikace, registrace (lícování) a fúze. Kromě obecného úvodu, pojednává tato disertační práce o dvou medicínsky orientovaných tématech, jež byla formulována ve spolupráci s Philips Netherland BV, divizí Philips Healthcare. První téma je zaměřeno na oblast zpracování obrazů subtrakční angiografie dolních končetin člověka získaných pomocí výpočetní X-Ray tomografie (CT). Subtrakční angiografie je obvykle využívaná při podezření na periferní cévní onemocnění (PAOD) nebo při akutním poškození dolních končetin jako jsou fraktury apod. Současné komerční metody nejsou dostatečně spolehlivé už v předzpracování, jako je například odstranění pacientského stolu, pokrývky, dlahy, apod. Spolehlivost a přesnost identifikace cév v subtrahovaných datech vedoucích v blízkosti kostí je v důsledku Partial Volume artefaktu rovněž nízká. Automatické odstranění kalcifikací nebo detekce malých cév doplňujících nezbytnou informaci o náhradním zásobení dolních končetin krví v případě přerušení hlavních zásobujících cév v současné době rovněž nesplňují kritéria pro plně automatické zpracování. Proto hlavním cílem týkající se tohoto tématu bylo vyvinout automatický systém, který by mohl současné nedostatky v CTSA vyšetření odstranit. Druhé téma je orientováno na identifikaci patologických změn na páteři člověka v CT obrazech se zaměřením na osteolytické a osteoblastické léze u jednotlivých obratlů. Tyto změny obvykle nastávají v důsledků postižení metastazujícím procesem rakovinového onemocnění. Pro detekci patologických změn je pak potřeba identifikace a segmentace jednotlivých obratlů. Přesnost analýzy jednotlivých lézí však závisí rovněž na správné identifikaci těla a zadních segmentů u jednotlivých obratlů a na segmentaci trabekulárního centra obratlů, tj. odstranění kortikální kosti. Během léčby mohou být pacienti skenováni vícekrát, obvykle s několika-mesíčním odstupem. Hodnocení případného vývoje již detekovaných patologických změn pak logicky vychází ze správné detekce patologií v jednotlivých obratlech korespondujících si v jednotlivých akvizicích. Jelikož jsou příslušné obratle v jednotlivých akvizicích obvykle na různé pozici, jejich fúze, vedoucí k analýze časového vývoje detekovaných patologií, je komplikovaná. Požadovaným výsledkem v tomto tématu je vytvoření komplexního systému pro detekci patologických změn v páteři, především osteoblastických a osteolytických lézí. Takový systém tedy musí umožnovat jak segmentaci jednotlivých obratlů, jejich automatické rozdělení na hlavní části a odstranění kortikální kosti, tak také detekci patologických změn a jejich hodnocení. Ačkoliv je tato disertační práce v obou výše zmíněných tématech primárně zaměřena na experimentální část zpracování medicínských obrazů, zabývá se všemi nezbytnými kroky, jako je předzpracování, registrace, dodatečné zpracování a hodnocení výsledků, vedoucími k možné aplikovatelnosti obou systému v klinické praxi. Jelikož oba systémy byly řešeny v rámci týmové spolupráce jako celek, u obou témat jsou pro některé konkrétní kroky uvedeny odkazy na doktorskou práci Miloše Malínského.Analysis of medical images has been subject of basic research for many years. Many research papers have been published in the field related to image analysis and focused on partial aspects such as reconstruction, restoration, segmentation and classification, registration (spatial alignment) and fusion. Besides the introduction of related general concepts used in medical image processing, this thesis deals with two specific medical problems formulated in cooperation with Philips Netherland BV, Philips Healthcare division. The first topic is focused on subtraction angiography in patients’ lower legs utilizing image data from X-Ray computed tomography (CT). CT subtraction angiography (CTSA) is typically used for indication of the Peripheral Artery Occlusive Disease (PAOD) and for examination of acute injuries of lower legs such as acute fractures, etc. Current methods in clinical praxis are not sufficient regarding the pre-processing such as masking of patient desk, cover, splint, etc. The subtraction of blood vessels adjacent to neighboring bones in lower legs is of low accuracy due to the Partial Volume artifact. Masking of calcifications and detection of tiny blood vessels complementing necessary information about the alternative blood supply in lower legs in case of obstruction in main arteries is also not reliable for fully automated process presently. Therefore, the main aim regarding this topic was to develop an automated framework that could overcome current shortcomings in CTSA examination. The second topic is oriented on the identification and evaluation of pathologic changes in human spine, focusing on osteolytic and osteoblastic lesions in individual vertebrae in CT images. Such changes occur typically as a consequence of metastasizing process of cancerous disease. For the detection of pathologic changes, an identification and segmentation of individual vertebrae is necessary. Moreover, the analysis of individual lesions in vertebrae depends also on correct identification of vertebral body and posterior segments of each vertebra, and on segmentation of their trabecular centers. Patients are typically examined more than once during their therapy. Then, the evaluation of possible tumorous progression is based on accurate detection of pathologies in individual vertebrae in the base-line and corresponding follow-up images. Since the corresponding vertebrae are in mutually different positions in the follow-up images, their fusion leading to the analysis of the lesion progression is complicated. The main aim regarding this topic is to develop a complex framework for detection of pathologic lesions on spine, with the main focus on osteoblastic and osteolystic lesions. Such system has to provide not only reliable segmentation of individual vertebrae and detection of their main regions but also the masking of their cortical bone, detection of their pathologic changes and their evaluation. Although this dissertation thesis is primarily oriented at the experimental part of medical image processing considering both the above mentioned topics, it deals with all necessary processing steps, i.e. preprocessing, image registration, post-processing and evaluation of results, leading to the future use of both frameworks in clinical practice. Since both frameworks were developed in a team, there are some chapters referring to the dissertation thesis of Milos Malinsky.

A non-invasive image based system for early diagnosis of prostate cancer.

Prostate cancer is the second most fatal cancer experienced by American males. The average American male has a 16.15% chance of developing prostate cancer, which is 8.38% higher than lung cancer, the second most likely cancer. The current in-vitro techniques that are based on analyzing a patients blood and urine have several limitations concerning their accuracy. In addition, the prostate Specific Antigen (PSA) blood-based test, has a high chance of false positive diagnosis, ranging from 28%-58%. Yet, biopsy remains the gold standard for the assessment of prostate cancer, but only as the last resort because of its invasive nature, high cost, and potential morbidity rates. The major limitation of the relatively small needle biopsy samples is the higher possibility of producing false positive diagnosis. Moreover, the visual inspection system (e.g., Gleason grading system) is not quantitative technique and different observers may classify a sample differently, leading to discrepancies in the diagnosis. As reported in the literature that the early detection of prostate cancer is a crucial step for decreasing prostate cancer related deaths. Thus, there is an urgent need for developing objective, non-invasive image based technology for early detection of prostate cancer. The objective of this dissertation is to develop a computer vision methodology, later translated into a clinically usable software tool, which can improve sensitivity and specificity of early prostate cancer diagnosis based on the well-known hypothesis that malignant tumors are will connected with the blood vessels than the benign tumors. Therefore, using either Diffusion Weighted Magnetic Resonance imaging (DW-MRI) or Dynamic Contrast Enhanced Magnetic Resonance Imaging (DCE-MRI), we will be able to interrelate the amount of blood in the detected prostate tumors by estimating either the Apparent Diffusion Coefficient (ADC) in the prostate with the malignancy of the prostate tumor or perfusion parameters. We intend to validate this hypothesis by demonstrating that automatic segmentation of the prostate from either DW-MRI or DCE-MRI after handling its local motion, provides discriminatory features for early prostate cancer diagnosis. The proposed CAD system consists of three majors components, the first two of which constitute new research contributions to a challenging computer vision problem. The three main components are: (1) A novel Shape-based segmentation approach to segment the prostate from either low contrast DW-MRI or DCE-MRI data; (2) A novel iso-contours-based non-rigid registration approach to ensure that we have voxel-on-voxel matches of all data which may be more difficult due to gross patient motion, transmitted respiratory effects, and intrinsic and transmitted pulsatile effects; and (3) Probabilistic models for the estimated diffusion and perfusion features for both malignant and benign tumors. Our results showed a 98% classification accuracy using Leave-One-Subject-Out (LOSO) approach based on the estimated ADC for 30 patients (12 patients diagnosed as malignant; 18 diagnosed as benign). These results show the promise of the proposed image-based diagnostic technique as a supplement to current technologies for diagnosing prostate cancer