Computation of independent contact regions for grasping 3-D objects

Precision grasp synthesis has received a lot of attention in past few last years. However, real mechanical hands can hardly assure that the fingers will precisely touch the object at the computed contact points. The concept of independent contact regions (ICRs) was introduced to provide robustness to finger positioning errors during an object grasping: A finger contact anywhere inside each of these regions assures a force-closure grasp, despite the exact contact position. This paper presents an efficient algorithm to compute ICRs with any number of frictionless or frictional contacts on the surface of any 3-D object. The proposed approach generates the independent regions by growing them around the contact points of a given starting grasp. A two-phase approach is provided to find a locally optimal force-closure grasp that serves as the starting grasp, considering as grasp quality measure the largest perturbation wrench that the grasp can resist, independently of the perturbation direction. The proposed method can also be applied to compute ICRs when several contacts are fixed beforehand. The approach has been implemented, and application examples are included to illustrate its performance.Peer Reviewe

Robotic Manipulation of Environmentally Constrained Objects Using Underactuated Hands

Robotics for agriculture represents the ultimate application of one of our society\u27s latest and most advanced innovations to its most ancient and vital industry. Over the course of history, mechanization and automation have increased crop output several orders of magnitude, enabling a geometric growth in population and an increase in quality of life across the globe. As a challenging step, manipulating objects in harvesting automation is still under investigation in literature. Harvesting or the process of gathering ripe crops can be described as breaking environmentally constrained objects into two or more pieces at the desired locations. In this thesis, the problem of purposefully failing (breaking) or yielding objects by a robotic gripper is investigated. A failure task is first formulated using mechanical failure theories. Next, a grasp quality measure is presented to characterize a suitable grasp configuration and systematically control the failure behavior of the object. This approach combines the failure task and the capability of the gripper for wrench insertion. The friction between the object and the gripper is used to formulate the capability of the gripper for wrench insertion. A new method inspired by the human pre-manipulation process is introduced to utilize the gripper itself as the measurement tool and obtain a friction model. The developed friction model is capable of capturing the anisotropic behavior of materials which is the case for most fruits and vegetables.The limited operating space for harvesting process, the vulnerability of agricultural products and clusters of crops demand strict conditions for the manipulation process. This thesis presents a new sensorized underactuated self-adaptive finger to address the stringent conditions in the agricultural environment. This design incorporates link-driven underactuated mechanism with an embedded load cell for contact force measurement and a trimmer potentiometer for acquiring joint variables. The integration of these sensors results in tactile-like sensations in the finger without compromising the size and complexity of the proposed design. To obtain an optimum finger design, the placement of the load cell is analyzed using Finite Element Method (FEM). The design of the finger features a particular round shape of the distal phalanx and specific size ratio between the phalanxes to enable both precision and power grasps. A quantitative evaluation of the grasp efficiency by constructing a grasp wrench space is also provided. The effectiveness of the proposed designs and theories are verified through real-time experiments. For conducting the experiments in real-time, a software/hardware platform capable of dataset management is crucial. In this thesis, a new comprehensive software interface for integration of industrial robots with peripheral tools and sensors is designed and developed. This software provides a real-time low-level access to the manipulator controller. Furthermore, Data Acquisition boards are integrated into the software which enables Rapid Prototyping methods. Additionally, Hardware-in-the-loop techniques can be implemented by adding the complexity of the plant under control to the test platform. The software is a collection of features developed and distributed under GPL V3.0

Analysis and design of multi-arm robotic systems manipulating large objects.

by Ho Siu Yan.Thesis (M.Phil.)--Chinese University of Hong Kong, 1995.Includes bibliographical references (leaves 105-110).ACKNOWLEDGEMENT --- p.iABSTRACT --- p.iiNOMENCLATURE --- p.iiiTABLE OF CONTENTS --- p.vLIST OF FIGURES --- p.viiChapter 1 --- INTRODUCTION --- p.1Chapter 2 --- FORM-CLOSURE GRASP --- p.9Chapter 2.1 --- Condition for Form-closure Grasp --- p.9Chapter 2.2 --- Construction of Form-closure Grasp --- p.12Chapter 2.3 --- Configuration Stability of Form-closure Grasp --- p.28Chapter 2.4 --- Determination of Object Frame from a Form-closure Grasp --- p.33Chapter 3 --- DYNAMIC MODEL OF MULTI-ARM SYSTEMS HANDLING ONE OBJECT --- p.36Chapter 3.1 --- System Description --- p.36Chapter 3.2 --- Manipulator Dynamics --- p.37Chapter 3.3 --- Object Dynamics --- p.37Chapter 3.4 --- Contact Forces --- p.38Chapter 3.5 --- Kinematic Relations --- p.40Chapter 3.6 --- Overall System --- p.41Chapter 3.7 --- Constraint Space Matrices --- p.42Chapter 3.8 --- Motion Space Matrices --- p.48Chapter 3.9 --- General Joint Model --- p.54Chapter 4 --- FORWARD DYNAMICS OF MULTI-ARM SYSTEMS HANDLING ONE OBJECT --- p.65Chapter 4.1 --- Previous Works --- p.65Chapter 4.2 --- Modified Approach --- p.69Chapter 4.3 --- Constraint Violation Stabilization Method --- p.73Chapter 4.4 --- Computation Requirement of the Algorithm --- p.75Chapter 5 --- CONCLUSION --- p.78Chapter 5.1 --- Future Researches --- p.79APPENDICESChapter A --- PROOFS AND DISCUSSIONS RELATED TO CHAPTER TWO --- p.81Chapter B --- IMPLEMENTATION OF THE ALGORITHM FOR DETERMINING THE OBJECT FRAME FROM A FORM-CLOSURE GRASP --- p.95Chapter C --- EXPRESSING WRENCHES WITH ZERO-PITCH WRENCHES --- p.96Chapter D --- IMPLEMENTATION OF THE PROPOSED SIMULATION ALGORITHM --- p.98REFERENCES --- p.10

Soft Robotics: Design for Simplicity, Performance, and Robustness of Robots for Interaction with Humans.

This thesis deals with the design possibilities concerning the next generation of advanced Robots. Aim of the work is to study, analyse and realise artificial systems that are essentially simple, performing and robust and can live and coexist with humans. The main design guideline followed in doing so is the Soft Robotics Approach, that implies the design of systems with intrinsic mechanical compliance in their architecture. The first part of the thesis addresses design of new soft robotics actuators, or robotic muscles. At the beginning are provided information about what a robotic muscle is and what is needed to realise it. A possible classification of these systems is analysed and some criteria useful for their comparison are explained. After, a set of functional specifications and parameters is identified and defined, to characterise a specific subset of this kind of actuators, called Variable Stiffness Actuators. The selected parameters converge in a data-sheet that easily defines performance and abilities of the robotic system. A complete strategy for the design and realisation of this kind of system is provided, which takes into account their me- chanical morphology and architecture. As consequence of this, some new actuators are developed, validated and employed in the execution of complex experimental tasks. In particular the actuator VSA-Cube and its add-on, a Variable Damper, are developed as the main com- ponents of a robotics low-cost platform, called VSA-CubeBot, that v can be used as an exploratory platform for multi degrees of freedom experiments. Experimental validations and mathematical models of the system employed in multi degrees of freedom tasks (bimanual as- sembly and drawing on an uneven surface), are reported. The second part of the thesis is about the design of multi fingered hands for robots. In this part of the work the Pisa-IIT SoftHand is introduced. It is a novel robot hand prototype designed with the purpose of being as easily usable, robust and simple as an industrial gripper, while exhibiting a level of grasping versatility and an aspect comparable to that of the human hand. In the thesis the main theo- retical tool used to enable such simplification, i.e. the neuroscience– based notion of soft synergies, are briefly reviewed. The approach proposed rests on ideas coming from underactuated hand design. A synthesis method to realize a desired set of soft synergies through the principled design of adaptive underactuated mechanisms, which is called the method of adaptive synergies, is discussed. This ap- proach leads to the design of hands accommodating in principle an arbitrary number of soft synergies, as demonstrated in grasping and manipulation simulations and experiments with a prototype. As a particular instance of application of the method of adaptive syner- gies, the Pisa–IIT SoftHand is then described in detail. The design and implementation of the prototype hand are shown and its effec- tiveness demonstrated through grasping experiments. Finally, control of the Pisa/IIT Hand is considered. Few different control strategies are adopted, including an experimental setup with the use of surface Electromyographic signals

Towards observable haptics: Novel sensors for capturing tactile interaction patterns

Kõiva R. Towards observable haptics: Novel sensors for capturing tactile interaction patterns. Bielefeld: Bielefeld University; 2014.Touch is one of the primary senses humans use when performing coordinated interaction, but the lack of a sense of touch in the majority of contemporary interactive technical systems, such as robots, which operate in non-deterministic environments, results in interactions that can at best be described as clumsy. Observing human haptics and extracting the salient information from the gathered data is not only relevant if we are to try to understand the involved underlying cognitive processes, but should also provide us with significant clues to design future intelligent interactive systems. Such systems could one day help to take the burden of tedious tasks off our hands in a similar fashion to how industrial robots revolutionized manufacturing. The aim of the work in this thesis was to provide significant advancements in tactile sensing technology, and thus move us a step closer to realizing this goal. The contributions contained herein can be broken into two major parts. The first part investigates capturing interaction patterns in humans with the goals of better understanding manual intelligence and improving the lives of hand amputees, while the second part is focused on augmenting technical systems with a sense of touch. tacTiles, a wireless tactile sensitive surface element attached to a deformable textile, was developed to capture human full-body interactions with large surfaces we come into contact with in our daily lives, such as floors, chairs, sofas or other furniture. The Tactile Dataglove, iObject and the Tactile Pen were developed especially to observe human manual intelligence. Whereas iObject allows motion sensing and a higher definition tactile signal to be captured than the Tactile Dataglove (220 tactile cells in the first iObject prototype versus 54 cells in the glove), the wearable glove makes haptic interactions with arbitrary objects observable. The Tactile Pen was designed to measure grip force during handwriting in order to better facilitate therapeutic treatment assessments. These sensors have already been extensively used by various research groups, including our own, to gain a better understanding of human manual intelligence. The Finger-Force-Linear-Sensor and the Tactile Bracelet are two novel sensors that were developed to facilitate more natural control of dexterous multi Degree-of-Freedom (DOF) hand prostheses. The Finger-Force-Linear-Sensor is a very accurate bidirectional single finger force ground-truth measurement device that was designed to enable testing and development of single finger forces and muscle activations mapping algorithms. The Tactile Bracelet was designed with the goal to provide a more robust and intuitive means of control for multi-DOF hand prostheses by measuring the muscle bulgings of the remnant muscles of lower arm amputees. It is currently in development and will eventually cover the complete forearm circumference with high spatial resolution tactile sensitive surfaces. An experiment involving a large number of lower arm amputees has already been planned. The Modular flat tactile sensor system, the Fabric-based touch sensitive artificial skin and the 3D shaped tactile sensor were developed to cover and to add touch sensing capabilities to the surfaces of technical systems. The rapid augmentation of systems with a sense of touch was the main goal of the modular flat tactile sensor system. The developed sensor modules can be used alone or in an array to form larger tactile sensitive surfaces such as tactile sensitive tabletops. As many robots have curved surfaces, using flat rigid modules severely limits the areas that can be covered with tactile sensors. The Fabric-based tactile sensor, originally developed to form a tactile dataglove for human hands, can with minor modifications also function as an artificial skin for technical systems. Finally, the 3D shaped tactile sensor based on Laser-Direct-Structuring technology is a novel tactile sensor that has a true 3D shape and provides high sensitivity and a high spatial resolution. These sensors take us further along the path towards creating general purpose technical systems that in time can be of great help to us in our daily lives. The desired tactile sensor characteristics differ significantly according to which haptic interaction patterns we wish to measure. Large tactile sensor arrays that are used to capture full body haptic interactions with floors and upholstered furniture, or that are designed to cover large areas of technical system surfaces, need to be scalable, have low power consumption and should ideally have a low material cost. Two examples of such sensors are tacTiles and the Fabric-based sensor for curved surfaces. At the other end of the tactile sensor development spectrum, if we want to observe manual interactions, high spatial and temporal resolution are crucial to enable the measurement of fine grasping and manipulation actions. Our fingertips contain the highest density area of mechanoreceptors, the organs that sense mechanical pressure and distortions. Thus, to construct biologically inspired anthropomorphic robotic hands, the artificial tactile sensors for the fingertips require similar high-fidelity sensors with surfaces that are curved under small bending radii in 2 dimensions, have high spatial densities, while simultaneously providing high sensitivity. With the fingertip tactile sensor, designed to fit the Shadow Robot Hands' fingers, I show that such sensors can indeed be constructed in the 3D-shaped high spatial resolution tactile sensor section of my thesis. With my work I have made a significant contribution towards making haptics more observable. I achieved this by developing a high number of novel tactile sensors that are usable, give a deeper insight into human haptic interactions, have great potential to help amputees and that make technical systems, such as robots, more capable