Utilization-Based Scheduling of Flexible Mixed-Criticality Real-Time Tasks

Mixed-criticality models are an emerging paradigm for the design of real-time systems because of their significantly improved resource efficiency. However, formal mixed-criticality models have traditionally been characterized by two impractical assumptions: once \textit{any} high-criticality task overruns, \textit{all} low-criticality tasks are suspended and \textit{all other} high-criticality tasks are assumed to exhibit high-criticality behaviors at the same time. In this paper, we propose a more realistic mixed-criticality model, called the flexible mixed-criticality (FMC) model, in which these two issues are addressed in a combined manner. In this new model, only the overrun task itself is assumed to exhibit high-criticality behavior, while other high-criticality tasks remain in the same mode as before. The guaranteed service levels of low-criticality tasks are gracefully degraded with the overruns of high-criticality tasks. We derive a utilization-based technique to analyze the schedulability of this new mixed-criticality model under EDF-VD scheduling. During runtime, the proposed test condition serves an important criterion for dynamic service level tuning, by means of which the maximum available execution budget for low-criticality tasks can be directly determined with minimal overhead while guaranteeing mixed-criticality schedulability. Experiments demonstrate the effectiveness of the FMC scheme compared with state-of-the-art techniques.Comment: This paper has been submitted to IEEE Transaction on Computers (TC) on Sept-09th-201

Combining Task-level and System-level Scheduling Modes for Mixed Criticality Systems

Different scheduling algorithms for mixed criticality systems have been recently proposed. The common denominator of these algorithms is to discard low critical tasks whenever high critical tasks are in lack of computation resources. This is achieved upon a switch of the scheduling mode from Normal to Critical. We distinguish two main categories of the algorithms: system-level mode switch and task-level mode switch. System-level mode algorithms allow low criticality (LC) tasks to execute only in normal mode. Task-level mode switch algorithms enable to switch the mode of an individual high criticality task (HC), from low (LO) to high (HI), to obtain priority over all LC tasks. This paper investigates an online scheduling algorithm for mixed-criticality systems that supports dynamic mode switches for both task level and system level. When a HC task job overruns its LC budget, then only that particular job is switched to HI mode. If the job cannot be accommodated, then the system switches to Critical mode. To accommodate for resource availability of the HC jobs, the LC tasks are degraded by stretching their periods until the Critical mode exhibiting job complete its execution. The stretching will be carried out until the resource availability is met. We have mechanized and implemented the proposed algorithm using Uppaal. To study the efficiency of our scheduling algorithm, we examine a case study and compare our results to the state of the art algorithms.Comment: \copyright 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other work

FANTOM: Fault Tolerant Task-Drop Aware Scheduling for Mixed-Criticality Systems

Mixed-Criticality (MC) systems have emerged as an effective solution in various industries, where multiple tasks with various real-time and safety requirements (different levels of criticality) are integrated onto a common hardware platform. In these systems, a fault may occur due to different reasons, e.g., hardware defects, software errors or the arrival of unexpected events. In order to tolerate faults in MC systems, the re-execution technique is typically employed, which may lead to overrun of high-criticality tasks (HCTs), which necessitates the drop of low-criticality tasks (LCTs) or degrading their quality. However, frequent drops or relatively long execution times of LCTs (especially mission-critical tasks) are not always desirable and it may impose a negative impact on the performance, or the functionality of MC systems. In this regard, this article proposes a realistic MC task model and develops a design-time task-drop aware schedulability analysis based on the Earliest Deadline First with Virtual Deadline (EDF-VD) algorithm. According to this analysis and the proposed scheduling policy based on the new MC task model, in the high-criticality (HI) mode, when an HCT overruns and the system switches to the HI mode, the number of drops per LCT is prohibited from passing a predefined threshold. In addition, to guarantee the real-time constraints and safety requirements of MC tasks in the presence of faults (assuming transient faults in this article), a corresponding scheduling mechanism has been developed. According to the obtained results from an extensive set of simulations, which have been validated through a realistic avionic application, the proposed method improves the acceptance ratio by up to 43.9% compared to state-of-the-art

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

CONTREX: Design of embedded mixed-criticality CONTRol systems under consideration of EXtra-functional properties

The increasing processing power of today’s HW/SW platforms leads to the integration of more and more functions in a single device. Additional design challenges arise when these functions share computing resources and belong to different criticality levels. CONTREX complements current activities in the area of predictable computing platforms and segregation mechanisms with techniques to consider the extra-functional properties, i.e., timing constraints, power, and temperature. CONTREX enables energy efficient and cost aware design through analysis and optimization of these properties with regard to application demands at different criticality levels. This article presents an overview of the CONTREX European project, its main innovative technology (extension of a model based design approach, functional and extra-functional analysis with executable models and run-time management) and the final results of three industrial use-cases from different domain (avionics, automotive and telecommunication).The work leading to these results has received funding from the European Community’s Seventh Framework Programme FP7/2007-2011 under grant agreement no. 611146

Software Fault Tolerance in Real-Time Systems: Identifying the Future Research Questions

Tolerating hardware faults in modern architectures is becoming a prominent problem due to the miniaturization of the hardware components, their increasing complexity, and the necessity to reduce the costs. Software-Implemented Hardware Fault Tolerance approaches have been developed to improve the system dependability to hardware faults without resorting to custom hardware solutions. However, these come at the expense of making the satisfaction of the timing constraints of the applications/activities harder from a scheduling standpoint. This paper surveys the current state of the art of fault tolerance approaches when used in the context real-time systems, identifying the main challenges and the cross-links between these two topics. We propose a joint scheduling-failure analysis model that highlights the formal interactions among software fault tolerance mechanisms and timing properties. This model allows us to present and discuss many open research questions with the final aim to spur the future research activities

A Survey of Research into Mixed Criticality Systems

This survey covers research into mixed criticality systems that has been published since Vestal’s seminal paper in 2007, up until the end of 2016. The survey is organised along the lines of the major research areas within this topic. These include single processor analysis (including fixed priority and EDF scheduling, shared resources and static and synchronous scheduling), multiprocessor analysis, realistic models, and systems issues. The survey also explores the relationship between research into mixed criticality systems and other topics such as hard and soft time constraints, fault tolerant scheduling, hierarchical scheduling, cyber physical systems, probabilistic real-time systems, and industrial safety standards