Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Co-Optimization of Damage Assessment and Restoration: A Resilience-Driven Dynamic Crew Allocation for Power Distribution Systems

This study introduces a mixed-integer linear programming (MILP) model, effectively co-optimizing patrolling, damage assessment, fault isolation, repair, and load re-energization processes. The model is designed to solve a vital operational conundrum: deciding between further network exploration to obtain more comprehensive data or addressing the repair of already identified faults. As information on the fault location and repair timelines becomes available, the model allows for dynamic adaptation of crew dispatch decisions. In addition, this study proposes a conservative power flow constraint set that considers two network loading scenarios within the final network configuration. This approach results in the determination of an upper and a lower bound for node voltage levels and an upper bound for power line flows. To underscore the practicality and scalability of the proposed model, we have demonstrated its application using IEEE 123-node and 8500-node test systems, where it delivered promising results

Diagnostic Applications for Micro-Synchrophasor Measurements

This report articulates and justifies the preliminary selection of diagnostic applications for data from micro-synchrophasors (µPMUs) in electric power distribution systems that will be further studied and developed within the scope of the three-year ARPA-e award titled Micro-synchrophasors for Distribution Systems

Utilisation of transformer condition monitoring data

Electricity grids are getting older and demand of electricity is rising. The critical com-ponents in electricity transmission systems should be monitored for assessing the need for maintenance. The electricity grid works more reliable when the condition infor-mation of important components are available continuously and thus larger catastrophic failures are preventable. Transformers are one of the critical components in electricity transmission. It is im-portant that they operate continuously. Transformers are reliable and long life compo-nents but the older the transformer is, the more sensitive it is about to fail. Condition monitoring provides improved data on the condition of transformer. With on-line condi-tion monitoring it is possible to detect developing failures and then a corrective action can be made in time. This study focuses on the utilization of transformer condition monitoring system in tra-ditional grid and in upcoming smart grid. The aim is to find out, where the condition monitoring data is needed in electricity transmission and distribution system manage-ment and how it is possible to carry the information to right place. This thesis introduces first the basics of a power system, the construction of a trans-former, transformer condition monitoring methods and condition monitoring data pro-cess. After that the management of a power system within traditional and smart grid is analyzed. The asset management process of both type power systems is explored through case study of transformer failure situations. In traditional power system the transformer maintenance bases mostly on time scheduled inspections. In smart grid the management is all time aware on the condition information of transformers which al-lows using of better fault prevention strategies.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Optimal Distribution Reconfiguration and Demand Management within Practical Operational Constraints

This dissertation focuses on specific aspects of the technical design and operation of a `smart\u27 distribution system incorporating new technology in the design process. The main purpose of this dissertation is to propose new algorithms in order to achieve a more reliable and economic distribution system. First, a general approach based on Mixed Integer Programming (MIP) is proposed to formulate the reconfiguration problem for a radial/weakly meshed distribution network or restoration following a fault. Two objectives considered in this study are to minimize the active power loss, and to minimize the number of switching operations with respect to operational constraints, such as power balance, line ow limits, voltage limit, and radiality of the network. The latter is the most challenging issue in solving the problem by MIP. A novel approach based on Depth-First Search (DFS) algorithm is implemented to avoid cycles and loops in the system. Due to insufficient measurements and high penetration of controllable loads and renewable resources, reconfiguration with deterministic optimization may not lead to an optimal/feasible result. Therefore, two different methods are proposed to solve the reconfiguration problem in presence of load uncertainty. Second, a new pricing algorithm for residential load participation in demand response program is proposed. The objective is to reduce the cost to the utility company while mitigating the impact on customer satisfaction. This is an iterative approach in which residents and energy supplier exchange information on consumption and price. The prices as well as appliance schedule for the residential customers will be achieved at the point of convergence. As an important contribution of this work, distribution network constraints such as voltage limits, equipment capacity limits, and phase balance constraints are considered in the pricing algorithm. Similar to the locational marginal price (LMP) at the transmission level, different prices for distribution nodes will be obtained. Primary consideration in the proposed approach, and frequently ignored in the literature, is to avoid overly sophisticated decision-making at the customer level. Most customers will have limited capacity or need for elaborate scheduling where actual energy cost savings will be modest

Occupational Cultures as a Challenge to Technological Innovation

This paper explains conflict over technological process innovation in cultural terms, drawing primarily on a case study of electric power distribution and strategies to automate its operation

Value Assessment of Distribution Network Reconfiguration: A Danish Case Study

AbstractDistribution network reconfiguration is a mechanism that can improve the distribution system performance from multiple perspectives. In the context of smart grid wherein the degrees of automation and intelligence are high, the potential value of network reconfiguration can be significant. This paper presents a case study-based analysis to explore the potential value of reconfiguration in detail. The study is performed using a 10kV distribution grid of Denmark, while reconfiguration is applied to minimize the energy losses under both normal and post-fault conditions. The results show that although the reconfiguration is performed to achieve a single objective, the overall network performance is improved. In addition, the value achieved by reconfiguration can be very sensitive to the reconfiguration frequency and the associated cost

A Tabu-search-based Algorithm for Distribution Network Restoration to Improve Reliability and Resiliency

Fault restoration techniques have always been crucial for distribution system operators (DSOs). In the last decade, it started to gain more and more importance due to the introduction of output-based regulations where DSO performances are evaluated according to frequency and duration of energy supply interruptions. The paper presents a tabu-search-based algorithm able to assist distribution network operational engineers in identifying solutions to restore the energy supply after permanent faults. According to the network property, two objective functions are considered to optimize either reliability or resiliency. The mathematical formulation includes the traditional feeders, number of switching operation limit, and radiality constraints. Thanks to the DSO of Milan, Unareti, the proposed algorithm has been tested on a real distribution network to investigate its effectiveness

System configuration, fault detection, location, isolation and restoration: a review on LVDC Microgrid protections

Low voltage direct current (LVDC) distribution has gained the significant interest of research due to the advancements in power conversion technologies. However, the use of converters has given rise to several technical issues regarding their protections and controls of such devices under faulty conditions. Post-fault behaviour of converter-fed LVDC system involves both active converter control and passive circuit transient of similar time scale, which makes the protection for LVDC distribution significantly different and more challenging than low voltage AC. These protection and operational issues have handicapped the practical applications of DC distribution. This paper presents state-of-the-art protection schemes developed for DC Microgrids. With a close look at practical limitations such as the dependency on modelling accuracy, requirement on communications and so forth, a comprehensive evaluation is carried out on those system approaches in terms of system configurations， fault detection, location, isolation and restoration

A reconfigurable distributed multiagent system optimized for scalability

This thesis proposes a novel solution for optimizing the size and communication overhead of a distributed multiagent system without compromising the performance. The proposed approach addresses the challenges of scalability especially when the multiagent system is large. A modified spectral clustering technique is used to partition a large network into logically related clusters. Agents are assigned to monitor dedicated clusters rather than monitor each device or node. The proposed scalable multiagent system is implemented using JADE (Java Agent Development Environment) for a large power system. The performance of the proposed topology-independent decentralized multiagent system and the scalable multiagent system is compared by comprehensively simulating different fault scenarios. The time taken for reconfiguration, the overall computational complexity, and the communication overhead incurred are computed. The results of these simulations show that the proposed scalable multiagent system uses fewer agents efficiently, makes faster decisions to reconfigure when a fault occurs, and incurs significantly less communication overhead. The proposed scalable multiagent system has been coupled with a scalable reconfiguration algorithm for an electric power system attempting to minimize the number of switch combination explored for reconfiguration. The reconfiguration algorithm reconfigures a power system while maintaining bus voltages within limits specified by constraints