23 research outputs found
Resource Allocation for Multiple-Input and Multiple-Output Interference Networks
To meet the exponentially increasing traffic data driven by the rapidly growing mobile subscriptions, both industry and academia are exploring the potential of a new genera- tion (5G) of wireless technologies. An important 5G goal is to achieve high data rate. Small cells with spectrum sharing and multiple-input multiple-output (MIMO) techniques are one of the most promising 5G technologies, since it enables to increase the aggregate data rate by improving the spectral efficiency, nodes density and transmission bandwidth, respectively. However, the increased interference in the densified networks will in return limit the achievable rate performance if not properly managed.
The considered setup can be modeled as MIMO interference networks, which can be classified into the K-user MIMO interference channel (IC) and the K-cell MIMO interfering broadcast channel/multiple access channel (MIMO-IBC/IMAC) according to the number of mobile stations (MSs) simultaneously served by each base station (BS). The thesis considers two physical layer (PHY) resource allocation problems that deal with the interference for both models: 1) Pareto boundary computation for the achiev- able rate region in a K-user single-stream MIMO IC and 2) grouping-based interference alignment (GIA) with optimized IA-Cell assignment in a MIMO-IMAC under limited feedback. In each problem, the thesis seeks to provide a deeper understanding of the system and novel mathematical results, along with supporting numerical examples. Some of the main contributions can be summarized as follows.
It is an open problem to compute the Pareto boundary of the achievable rate region for a K-user single-stream MIMO IC. The K-user single-stream MIMO IC models multiple transmitter-receiver pairs which operate over the same spectrum simultaneously. Each transmitter and each receiver is equipped with multiple antennas, and a single desired data stream is communicated in each transmitter-receiver link. The individual achievable rates of the K users form a K-dimensional achievable rate region. To find efficient operating points in the achievable rate region, the Pareto boundary computation problem, which can be formulated as a multi-objective optimization problem, needs to be solved. The thesis transforms the multi-objective optimization problem to two single-objective optimization problems–single constraint rate maximization problem and alternating rate profile optimization problem, based on the formulations of the ε-constraint optimization and the weighted Chebyshev optimization, respectively. The thesis proposes two alternating optimization algorithms to solve both single-objective optimization problems. The convergence of both algorithms is guaranteed. Also, a heuristic initialization scheme is provided for each algorithm to achieve a high-quality solution. By varying the weights in each single-objective optimization problem, numerical results show that both algorithms provide an inner bound very close to the Pareto boundary. Furthermore, the thesis also computes some key points exactly on the Pareto boundary in closed-form.
A framework for interference alignment (IA) under limited feedback is proposed for a MIMO-IMAC. The MIMO-IMAC well matches the uplink scenario in cellular system, where multiple cells share their spectrum and operate simultaneously. In each cell, a BS receives the desired signals from multiple MSs within its own cell and each BS and each MS is equipped with multi-antenna. By allowing the inter-cell coordination, the thesis develops a distributed IA framework under limited feedback from three aspects: the GIA, the IA-Cell assignment and dynamic feedback bit allocation (DBA), respec- tively. Firstly, the thesis provides a complete study along with some new improvements of the GIA, which enables to compute the exact IA precoders in closed-form, based on local channel state information at the receiver (CSIR). Secondly, the concept of IA-Cell assignment is introduced and its effect on the achievable rate and degrees of freedom (DoF) performance is analyzed. Two distributed matching approaches and one centralized assignment approach are proposed to find a good IA-Cell assignment in three scenrios with different backhaul overhead. Thirdly, under limited feedback, the thesis derives an upper bound of the residual interference to noise ratio (RINR), formulates and solves a corresponding DBA problem. Finally, numerical results show that the proposed GIA with optimized IA-Cell assignment and the DBA greatly outperforms the traditional GIA algorithm
Limited feedback MIMO techniques for temporally correlated channels and linear receivers
Advanced mobile wireless networks will make extensive use of multiantenna (MIMO) transceivers to comply with high requirements of data rates and reliability. The use of feedback channels is of paramount importance to achieve this goal in systems employing frequency division duplexing (FDD). The design of the feedback mechanism is challenging due to the severe constraints imposed by computational complexity and feedback bandwidth restrictions.
This thesis addresses the design of transmission strategies in both single-user and multi-user MIMO systems, based on compact feedback messages. First, recursive feedback mechanisms for single-user transmission scenarios are proposed, including stochastic gradient techniques, deterministic updates based on Givens rotations and low computational complexity schemes based on partial update filtering concepts. Thereafter, channel feedback algorithms are proposed, and a convergence analysis for static channels is presented. These algorithms can be used to provide channel side information to any multi-user MIMO solution. A limited-feedback decentralized multi-user MIMO solution is proposed, which avoids the need for explicit channel feedback. A feed-forward technique is proposed, which allows our methods to operate in presence of feedback errors.
The performance of all the proposed algorithms is illustrated via link-level simulations, where the effect of different parameter values is assessed. Our results show that the proposed methods outperform existing limited-feedback counterparts over a range of low to medium mobile speeds, for moderate antenna array sizes that are deemed practical for commercial deployment. The computational complexity reduction of some of the proposed algorithms is also shown to be considerable, when compared to existing techniques
Interference mitigation using group decoding in multiantenna systems
fi=vertaisarvioitu|en=peerReviewed
Advanced Signal Processing Techniques for Two-Way Relaying Networks and Full-Duplex Communication Systems
Sehr hohe Datenraten und ständig verfügbare Netzabdeckung in
zukĂĽnftigen drahtlosen Netzwerken erfordern neue Algorithmen auf der
physischen Schicht. Die Nutzung von Relais stellt ein vielversprechendes
Verfahren dar, da die Netzabdeckung gesteigert werden kann. Zusätzlich
steht hierdurch im Vergleich zu Kupfer- oder Glasfaserleitungen eine
preiswerte Lösung zur Anbindung an die Netzinfrastruktur zur Verfügung.
Traditionelle Einwege-Relais-Techniken (One-Way Relaying [OWR]) nutzen
Halbduplex-Verfahren (HD-Verfahren), welche das Ăśbertragungssystem
ausbremst und zu spektralen Verlusten fĂĽhrt. Einerseits erlauben es
Zweiwege-Relais-Techniken (Two-Way Relaying [TWR]), simultan sowohl an das
Relais zu senden als auch von diesem zu empfangen, wodurch im Vergleich zu
OWR das Spektrum effizienter genutzt wird. Aus diesem Grunde untersuchen
wir Zweiwege-Relais und im Speziellen TWR-Systeme fĂĽr den
Mehrpaar-/Mehrnutzer-Betrieb unter Nutzung von Amplify-and-forward-Relais
(AF-Relais). Derartige Szenarien leiden unter Interferenzen zwischen Paaren
bzw. zwischen Nutzern. Um diesen Interferenzen Herr zu werden, werden
hochentwickelte Signalverarbeitungsalgorithmen – oder in anderen Worten
räumliche Mehrfachzugriffsverfahren (Spatial Division Multiple Access
[SDMA]) – benötigt. Andererseits kann der spektrale Verlust durch den
HD-Betrieb auch kompensiert werden, wenn das Relais im Vollduplexbetrieb
arbeitet. Nichtsdestotrotz ist ein FD-Gerät in der Praxis aufgrund starker
interner Selbstinterferenz (SI) und begrenztem Dynamikumfang des
Tranceivers schwer zu realisieren. Aus diesem Grunde sollten
fortschrittliche Verfahren zur SI-ĂśnterdrĂĽckung entwickelt werden. Diese
Dissertation trägt diesen beiden Zielen Rechnung, indem optimale und/oder
effiziente algebraische Lösungen entwickelt werden, welche verschiedenen
Nutzenfunktionen, wie Summenrate und minimale Sendeleistung, maximieren.Im
ersten Teil studieren wir zunächst Mehrpaar-TWR-Netzwerke mit einem
einzelnen Mehrantennen-AF-Relais. Dieser Anwendungsfall kann auch so
betrachtet werden, dass sich mehrere verschiedene Dienstoperatoren Relais
und Spektrum teilen, wobei verschiedene Nutzerpaare zu verschiedenen
Dienstoperatoren gehören. Aktuelle Ansätzen zielen auf
InterferenzunterdrĂĽckung ab. Wir schlagen ein auf Projektion basiertes
Verfahren zur Trennung mehrerer Dienstoperatoren (projection based
separation of multiple operators [ProBaSeMO]) vor. ProBaSeMO ist leicht
anpassbar fĂĽr den Fall, dass jeder Nutzer mehrere Antennen besitzt oder
unterschiedliche Systemdesignkriterien angewendet werden mĂĽssen. Als
BewertungsmaĂźstab fĂĽr ProBaSeMO entwickeln wir optimale Algorithmen zur
Maximierung der Summenrate, zur Minimierung der Sendeleistung am Relais
oder zur Maximierung des minimalen
Signal-zu-Interferenz-und-Rausch-Verhältnisses (Signal to Interference and
Noise Ratio [SINR]) am Nutzer. Zur Maximierung der Summenrate wurden
spezifische gradientenbasierte Methoden entwickelt, die unabhängig davon
sind, ob ein Nutzer mit einer oder mehr Antennen ausgestattet ist. Um im
Falle eines „Worst-Case“ immer noch eine polynomielle Laufzeit zu
garantieren, entwickelten wir einen Algorithmus mit polynomieller Laufzeit.
Dieser ist inspiriert von der „Polynomial Time Difference of Convex
Functions“-Methode (POTDC-Methode). Bezüglich der Summenrate des Systems
untersuchen wir zuletzt, welche Bedingungen erfĂĽllt sein mĂĽssen, um einen
Gewinn durch gemeinsames Nutzen zu erhalten. Hiernach untersuchen wir die
Maximierung der Summenrate eines Mehrpaar-TWR-Netzwerkes mit mehreren
Einantennen-AF-Relais und Einantennen-Nutzern. Das daraus resultierende
Problem der Summenraten-Maximierung, gebunden an eine bestimmte
Gesamtsendeleistung aller Relais im Netzwerk, ist ähnlich dem des
vorangegangenen Szenarios. Dementsprechend kann eine optimale Lösung für
das eine Szenario auch fĂĽr das jeweils andere Szenario genutzt werden.
Weiterhin werden basierend auf dem Polynomialzeitalgorithmus global
optimale Lösungen entwickelt. Diese Lösungen sind entweder an eine
maximale Gesamtsendeleistung aller Relais oder an eine maximale
Sendeleistung jedes einzelnen Relais gebunden. Zusätzlich entwickeln wir
suboptimale Lösungen, die effizient in ihrer Laufzeit sind und eine
Approximation der optimalen Lösung darstellen. Hiernach verlegen wir unser
Augenmerk auf ein Mehrpaar-TWR-Netzwerk mit mehreren Mehrantennen-AF-Relais
und mehreren Repeatern. Solch ein Szenario ist allgemeiner, da die
vorherigen beiden Szenarien als spezielle Realisierungen dieses Szenarios
aufgefasst werden können. Das Interferenz-Management in diesem Szenario
ist herausfordernder aufgrund der vorhandenen Repeater.
Interferenzneutralisierung (IN) stellt eine Lösung dar, um diese Art
Interferenz zu handhaben. Im Zuge dessen werden notwendige und ausreichende
Bedingungen zur Aufhebung der Interferenz hergeleitet. Weiterhin wird ein
Framework entwickelt, dass verschiedene Systemnutzenfunktionen optimiert,
wobei IN im jeweiligen Netzwerk vorhanden sein kann oder auch nicht. Dies
ist unabhängig davon, ob die Relais einer maximalen Gesamtsendeleistung
oder einer individuellen maximalen Sendeleistung unterliegen. Letztendlich
entwickeln wir ein Ăśbertragungsverfahren sowie ein Vorkodier- und
Dekodierverfahren fĂĽr Basisstationen (BS) in einem TWR-assistierten
Mehrbenutzer-MIMO-Downlink-Kanal. Im Vergleich mit dem
Mehrpaar-TWR-Netzwerk leidet dieses Szenario unter Interferenzen zwischen
den Kanälen. Wir entwickeln drei suboptimale Algorithmen, welche auf
Kanalinversion basieren. ProBaSeMO und „Zero-Forcing Dirty Paper
Coding“ (ZFDPC), welche eine geringe Zeitkomplexität aufweisen, schaffen
eine Balance zwischen Leistungsfähigkeit und Komplexität. Zusätzlich
gibt es jeweils nur geringe EinbrĂĽche in stark beanspruchten
Kommunikationssystemen.Im zweiten Teil untersuchen wir Techniken zur
SI-UnterdrĂĽckung, um den FD-Gewinn in einem Punkt-zu-Punkt-System
auszunutzen. Zunächst entwickeln wir ein Übertragungsverfahren, dass auf
SI RĂĽcksicht nimmt und die SI-UnterdrĂĽckung gegen den Multiplexgewinn
abwägt. Die besten Ergebnisse werden durch die perfekte Kenntnis des
Kanals erzielt, was praktisch nicht genau der Fall ist. Aus diesem Grund
werden Übertragungstechniken für den „Worst Case“ entwickelt, die den
Kanalschätzfehlern Rechnung tragen. Diese Fehler werden deterministisch
modelliert und durch Ellipsoide beschränkt. In praktischen Szenarien ist
der HF-Schaltkreise nicht perfekt. Dies hat Einfluss auf die Verfahren zur
SI-UnterdrĂĽckung und fĂĽhrt zu einer Restselbstinterferenz. Wir entwickeln
effiziente Ăśbertragungstechniken mittels Beamforming, welche auf dem
Signal-zu-Verlust-und-Rausch-Verhältnis (signal to leakage plus noise
ratio [SLNR]) aufbauen, um Unvollkommenheiten der HF-Schaltkreise
auszugleichen. Zusätzlich können alle Designkonzepte auf FD-OWR-Systeme
erweitert werden.To enable ultra-high data rate and ubiquitous coverage in future wireless
networks, new physical layer techniques are desired. Relaying is a
promising technique for future wireless networks since it can boost the
coverage and can provide low cost wireless backhauling solutions, as
compared to traditional wired backhauling solutions via fiber and copper.
Traditional one-way relaying (OWR) techniques suffer from the spectral loss
due to the half-duplex (HD) operation at the relay. On one hand, two-way
relaying (TWR) allows the communication partners to transmit to and/or
receive from the relay simultaneously and thus uses the spectrum more
efficiently than OWR. Therefore, we study two-way relays and more
specifically multi-pair/multi-user TWR systems with amplify-and-forward
(AF) relays. These scenarios suffer from inter-pair or inter-user
interference. To deal with the interference, advanced signal processing
algorithms, in other words, spatial division multiple access (SDMA)
techniques, are desired. On the other hand, if the relay is a full-duplex
(FD) relay, the spectral loss due to a HD operation can also be
compensated. However, in practice, a FD device is hard to realize due to
the strong loop-back self-interference and the limited dynamic range at the
transceiver. Thus, advanced self-interference suppression techniques should
be developed. This thesis contributes to the two goals by developing
optimal and/or efficient algebraic solutions for different scenarios
subject to different utility functions of the system, e.g., sum rate
maximization and transmit power minimization. In the first part of this
thesis, we first study a multi-pair TWR network with a multi-antenna AF
relay. This scenario can be also treated as the sharing of the relay and
the spectrum among multiple operators assuming that different pairs of
users belong to different operators. Existing approaches focus on
interference suppression. We propose a projection based separation of
multiple operators (ProBaSeMO) scheme, which can be easily extended when
each user has multiple antennas or when different system design criteria
are applied. To benchmark the ProBaSeMO scheme, we develop optimal relay
transmit strategies to maximize the system sum rate, minimize the required
transmit power at the relay, or maximize the minimum signal to interference
plus noise ratio (SINR) of the users. Specifically for the sum rate
maximization problem, gradient based methods are developed regardless
whether each user has a single antenna or multiple antennas. To guarantee a
worst-case polynomial time solution, we also develop a polynomial time
algorithm which has been inspired by the polynomial time difference of
convex functions (POTDC) method. Finally, we analyze the conditions for
obtaining the sharing gain in terms of the sum rate. Then we study the sum
rate maximization problem of a multi-pair TWR network with multiple single
antenna AF relays and single antenna users. The resulting sum rate
maximization problem, subject to a total transmit power constraint of the
relays in the network, yields a similar problem structure as in the
previous scenario. Therefore the optimal solution for one scenario can be
used for the other. Moreover, a global optimal solution, which is based on
the polyblock approach, and several suboptimal solutions, which are more
computationally efficient and approximate the optimal solution, are
developed when there is a total transmit power constraint of the relays in
the network or each relay has its own transmit power constraint. We then
shift our focus to a multi-pair TWR network with multiple multi-antenna AF
relays and multiple dumb repeaters. This scenario is more general because
the previous two scenarios can be seen as special realizations of this
scenario. The interference management in this scenario is more challenging
due to the existence of the repeaters. Interference neutralization (IN) is
a solution for dealing with this kind of interference. Thereby, necessary
and sufficient conditions for neutralizing the interference are derived.
Moreover, a general framework to optimize different system utility
functions in this network with or without IN is developed regardless
whether the AF relays in the network have a total transmit power limit or
individual transmit power limits. Finally, we develop the relay transmit
strategy as well as base station (BS) precoding and decoding schemes for a
TWR assisted multi-user MIMO (MU-MIMO) downlink channel. Compared to the
multi-pair TWR network, this scenario suffers from the co-channel
interference. We develop three suboptimal algorithms which are based on
channel inversion, ProBaSeMO and zero-forcing dirty paper coding (ZFDPC),
which has a low computational complexity, provides a balance between the
performance and the complexity, and suffers only a little when the system
is heavily loaded, respectively.In the second part of this thesis, we
investigate self-interference (SI) suppression techniques to exploit the FD
gain for a point-to-point MIMO system. We first develop SI aware transmit
strategies, which provide a balance between the SI suppression and the
multiplexing gain of the system. To get the best performance, perfect
channel state information (CSI) is needed, which is imperfect in practice.
Thus, worst case transmit strategies to combat the imperfect CSI are
developed, where the CSI errors are modeled deterministically and bounded
by ellipsoids. In real word applications, the RF chain is imperfect. This
affects the performance of the SI suppression techniques and thus results
in residual SI. We develop efficient transmit beamforming techniques, which
are based on the signal to leakage plus noise ratio (SLNR) criterion, to
deal with the imperfections in the RF chain. All the proposed design
concepts can be extended to FD OWR systems