7,142 research outputs found
Real-life performance of protocol combinations for wireless sensor networks
Wireless sensor networks today are used for many and diverse applications like nature monitoring, or process and wireless building automation. However, due to the limited access to large testbeds and the lack of benchmarking standards, the real-life evaluation of network protocols and their combinations remains mostly unaddressed in current literature. To shed further light upon this matter, this paper presents a thorough experimental performance analysis of six protocol combinations for TinyOS. During these protocol assessments, our research showed that the real-life performance often differs substantially from the expectations. Moreover, we found that combining protocols is far from trivial, as individual network protocols may perform very different in combination with other protocols. The results of our research emphasize the necessity of a flexible generic benchmarking framework, powerful enough to evaluate and compare network protocols and their combinations in different use cases
Supporting protocol-independent adaptive QoS in wireless sensor networks
Next-generation wireless sensor networks will be used for many diverse applications in time-varying network/environment conditions and on heterogeneous sensor nodes. Although Quality of Service (QoS) has been ignored for a long time in the research on wireless sensor networks, it becomes inevitably important when we want to deliver an adequate service with minimal efforts under challenging network conditions. Until now, there exist no general-purpose QoS architectures for wireless sensor networks and the main QoS efforts were done in terms of individual protocol optimizations. In this paper we present a novel layerless QoS architecture that supports protocol-independent QoS and that can adapt itself to time-varying application, network and node conditions. We have implemented this QoS architecture in TinyOS on TmoteSky sensor nodes and we have shown that the system is able to support protocol-independent QoS in a real life office environment
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
InterCloud: Utility-Oriented Federation of Cloud Computing Environments for Scaling of Application Services
Cloud computing providers have setup several data centers at different
geographical locations over the Internet in order to optimally serve needs of
their customers around the world. However, existing systems do not support
mechanisms and policies for dynamically coordinating load distribution among
different Cloud-based data centers in order to determine optimal location for
hosting application services to achieve reasonable QoS levels. Further, the
Cloud computing providers are unable to predict geographic distribution of
users consuming their services, hence the load coordination must happen
automatically, and distribution of services must change in response to changes
in the load. To counter this problem, we advocate creation of federated Cloud
computing environment (InterCloud) that facilitates just-in-time,
opportunistic, and scalable provisioning of application services, consistently
achieving QoS targets under variable workload, resource and network conditions.
The overall goal is to create a computing environment that supports dynamic
expansion or contraction of capabilities (VMs, services, storage, and database)
for handling sudden variations in service demands.
This paper presents vision, challenges, and architectural elements of
InterCloud for utility-oriented federation of Cloud computing environments. The
proposed InterCloud environment supports scaling of applications across
multiple vendor clouds. We have validated our approach by conducting a set of
rigorous performance evaluation study using the CloudSim toolkit. The results
demonstrate that federated Cloud computing model has immense potential as it
offers significant performance gains as regards to response time and cost
saving under dynamic workload scenarios.Comment: 20 pages, 4 figures, 3 tables, conference pape
A Survey on Communication Networks for Electric System Automation
Published in Computer Networks 50 (2006) 877–897, an Elsevier journal. The definitive version of this publication is available from Science Direct. Digital Object Identifier:10.1016/j.comnet.2006.01.005In today’s competitive electric utility marketplace, reliable and real-time information become the key factor for reliable delivery of power to the end-users, profitability of the electric utility and customer satisfaction. The operational and commercial demands of electric utilities require a high-performance data communication network that supports both existing functionalities and future operational requirements. In this respect, since such a communication network constitutes the core of the electric system automation applications, the design of a cost-effective and reliable network architecture is crucial.
In this paper, the opportunities and challenges of a hybrid network architecture are discussed for electric system automation.
More specifically, Internet based Virtual Private Networks, power line communications, satellite communications and wireless communications (wireless sensor networks, WiMAX and wireless mesh networks) are described in detail. The motivation of this paper is to provide a better understanding of the hybrid network architecture that can provide heterogeneous electric system automation application requirements. In this regard, our aim is to present a structured framework for electric utilities who plan to utilize new communication technologies for automation and hence, to make the decision making process more effective and direct.This work was supported by NEETRAC under
Project #04-157
EC-CENTRIC: An Energy- and Context-Centric Perspective on IoT Systems and Protocol Design
The radio transceiver of an IoT device is often where most of the energy is consumed. For this reason, most research so far has focused on low power circuit and energy efficient physical layer designs, with the goal of reducing the average energy per information bit required for communication. While these efforts are valuable per se, their actual effectiveness can be partially neutralized by ill-designed network, processing and resource management solutions, which can become a primary factor of performance degradation, in terms of throughput, responsiveness and energy efficiency. The objective of this paper is to describe an energy-centric and context-aware optimization framework that accounts for the energy impact of the fundamental functionalities of an IoT system and that proceeds along three main technical thrusts: 1) balancing signal-dependent processing techniques (compression and feature extraction) and communication tasks; 2) jointly designing channel access and routing protocols to maximize the network lifetime; 3) providing self-adaptability to different operating conditions through the adoption of suitable learning architectures and of flexible/reconfigurable algorithms and protocols. After discussing this framework, we present some preliminary results that validate the effectiveness of our proposed line of action, and show how the use of adaptive signal processing and channel access techniques allows an IoT network to dynamically tune lifetime for signal distortion, according to the requirements dictated by the application
Middleware Technologies for Cloud of Things - a survey
The next wave of communication and applications rely on the new services
provided by Internet of Things which is becoming an important aspect in human
and machines future. The IoT services are a key solution for providing smart
environments in homes, buildings and cities. In the era of a massive number of
connected things and objects with a high grow rate, several challenges have
been raised such as management, aggregation and storage for big produced data.
In order to tackle some of these issues, cloud computing emerged to IoT as
Cloud of Things (CoT) which provides virtually unlimited cloud services to
enhance the large scale IoT platforms. There are several factors to be
considered in design and implementation of a CoT platform. One of the most
important and challenging problems is the heterogeneity of different objects.
This problem can be addressed by deploying suitable "Middleware". Middleware
sits between things and applications that make a reliable platform for
communication among things with different interfaces, operating systems, and
architectures. The main aim of this paper is to study the middleware
technologies for CoT. Toward this end, we first present the main features and
characteristics of middlewares. Next we study different architecture styles and
service domains. Then we presents several middlewares that are suitable for CoT
based platforms and lastly a list of current challenges and issues in design of
CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268,
Digital Communications and Networks, Elsevier (2017
Middleware Technologies for Cloud of Things - a survey
The next wave of communication and applications rely on the new services
provided by Internet of Things which is becoming an important aspect in human
and machines future. The IoT services are a key solution for providing smart
environments in homes, buildings and cities. In the era of a massive number of
connected things and objects with a high grow rate, several challenges have
been raised such as management, aggregation and storage for big produced data.
In order to tackle some of these issues, cloud computing emerged to IoT as
Cloud of Things (CoT) which provides virtually unlimited cloud services to
enhance the large scale IoT platforms. There are several factors to be
considered in design and implementation of a CoT platform. One of the most
important and challenging problems is the heterogeneity of different objects.
This problem can be addressed by deploying suitable "Middleware". Middleware
sits between things and applications that make a reliable platform for
communication among things with different interfaces, operating systems, and
architectures. The main aim of this paper is to study the middleware
technologies for CoT. Toward this end, we first present the main features and
characteristics of middlewares. Next we study different architecture styles and
service domains. Then we presents several middlewares that are suitable for CoT
based platforms and lastly a list of current challenges and issues in design of
CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268,
Digital Communications and Networks, Elsevier (2017
- …