Parallel energy-efficient coverage optimization using WSN with Image Compression

Energy constraint is an important issue in wireless sensor networks. This paper proposes a distributed energy optimization method for target tracking applications. Sensor nodes are clustered by maximum entropy clustering. Then, the sensing field is divided for parallel sensor deployment optimization. For each cluster, the coverage and energy metrices are calculated by grid exclusion algorithm and Dijkstra’s algorithm, respectively. Cluster heads perform parallel particle swarm optimization to maximize the coverage metric and minimize the energy metric. Particle filter is improved by combing the radial basis function network, which constructs the process model. Thus, the target position is predicted by the improved particle filter. Dynamic awakening and optimal sensing scheme are then discussed in dynamic energy management mechanism. A group of sensor nodes which are located in the vicinity of the target will be awakened up and have the opportunity to report their data. The selection of sensor node is optimized considering sensing accuracy and energy consumption. Experimental results verify that energy efficiency of wireless sensor network is enhanced by parallel particle swarm optimization, dynamic awakening approach, and sensor node selection

Particle filter approximations for general open loop and open loop feedback sensor management

Sensor management is a stochastic control problem where the control mechanism is directed at the generation of observations. Typically, sensor management attempts to optimize a certain statistic derived from the posterior distribution of the state, such as covariance or entropy. However, these statistics often depend on future measurements which are not available at the moment the control decision is taken, making it necessary to consider their expectation over the entire measurement space. Though the idea of computing such expectations using a particle filter is not new, so far it has been applied only to specific sensor management problems and criterions. In this memorandum, for a considerably broad class of problems, we explicitly show how particle filters can be used to approximate general sensor management criterions in the open loop and open loop feedback cases. As examples, we apply these approximations to selected sensor management criterions. As an additional contribution of this memorandum, we show that every performance metric can be used to define a corresponding estimate and a corresponding task-driven sensor management criterion, and both of them can be approximated using particle filters. This is used to propose an approximate sensor management scheme based on the OSPA metric for multi-target tracking, which is included among our examples

Analysis of error propagation in particle filters with approximation

This paper examines the impact of approximation steps that become necessary when particle filters are implemented on resource-constrained platforms. We consider particle filters that perform intermittent approximation, either by subsampling the particles or by generating a parametric approximation. For such algorithms, we derive time-uniform bounds on the weak-sense $L_p$ error and present associated exponential inequalities. We motivate the theoretical analysis by considering the leader node particle filter and present numerical experiments exploring its performance and the relationship to the error bounds.Comment: Published in at http://dx.doi.org/10.1214/11-AAP760 the Annals of Applied Probability (http://www.imstat.org/aap/) by the Institute of Mathematical Statistics (http://www.imstat.org

People tracking by cooperative fusion of RADAR and camera sensors

Accurate 3D tracking of objects from monocular camera poses challenges due to the loss of depth during projection. Although ranging by RADAR has proven effective in highway environments, people tracking remains beyond the capability of single sensor systems. In this paper, we propose a cooperative RADAR-camera fusion method for people tracking on the ground plane. Using average person height, joint detection likelihood is calculated by back-projecting detections from the camera onto the RADAR Range-Azimuth data. Peaks in the joint likelihood, representing candidate targets, are fed into a Particle Filter tracker. Depending on the association outcome, particles are updated using the associated detections (Tracking by Detection), or by sampling the raw likelihood itself (Tracking Before Detection). Utilizing the raw likelihood data has the advantage that lost targets are continuously tracked even if the camera or RADAR signal is below the detection threshold. We show that in single target, uncluttered environments, the proposed method entirely outperforms camera-only tracking. Experiments in a real-world urban environment also confirm that the cooperative fusion tracker produces significantly better estimates, even in difficult and ambiguous situations

Multiple-Target Tracking in Complex Scenarios

In this dissertation, we develop computationally efficient algorithms for multiple-target tracking: MTT) in complex scenarios. For each of these scenarios, we develop measurement and state-space models, and then exploit the structure in these models to propose efficient tracking algorithms. In addition, we address design issues such as sensor selection and resource allocation. First, we consider MTT when the targets themselves are moving in a time-varying multipath environment. We develop a sparse-measurement model that allows us to exploit the inherent joint delay-Doppler diversity offered by the environment. We then reformulate the problem of MTT as a block-support recovery problem using the sparse measurement model. We exploit the structure of the dictionary matrix to develop a computationally efficient block support recovery algorithm: and thereby a multiple-target tracking algorithm) under the assumption that the channel state describing the time-varying multipath environment is known. Further, we also derive an upper bound on the overall error probability of wrongly identifying the support of the sparse signal. We then relax the assumption that the channel state is known. We develop a new particle filter called the Multiple Rao-Blackwellized Particle Filter: MRBPF) to jointly estimate both the target and the channel states. We also compute the posterior Cramér-Rao bound: PCRB) on the estimates of the target and the channel states and use the PCRB to find a suitable subset of antennas to be used for transmission in each tracking interval, as well as the power transmitted by these antennas. Second, we consider the problem of tracking an unknown number and types of targets using a multi-modal sensor network. In a multi-modal sensor network, different quantities associated with the same state are measured using sensors of different kinds. Hence, an efficient method that can suitably combine the diverse information measured by each sensor is required. We first develop a Hierarchical Particle Filter: HPF) to estimate the unknown state from the multi-modal measurements for a special class of problems which can be modeled hierarchically. We then model our problem of tracking using a hierarchical model and then use the proposed HPF for joint initiation, termination and tracking of multiple targets. The multi-modal data consists of the measurements collected from a radar, an infrared camera and a human scout. We also propose a unified framework for multi-modal sensor management that comprises sensor selection: SS), resource allocation: RA) and data fusion: DF). Our approach is inspired by the trading behavior of economic agents in commercial markets. We model the sensors and the sensor manager as economic agents, and the interaction among them as a double sided market with both consumers and producers. We propose an iterative double auction mechanism for computing the equilibrium of such a market. We relate the equilibrium point to the solutions of SS, RA and DF. Third, we address MTT problem in the presence of data association ambiguity that arises due to clutter. Data association corresponds to the problem of assigning a measurement to each target. We treat the data association and state estimation as separate subproblems. We develop a game-theoretic framework to solve the data association, in which we model each tracker as a player and the set of measurements as strategies. We develop utility functions for each player, and then use a regret-based learning algorithm to find the correlated equilibrium of this game. The game-theoretic approach allows us to associate measurements to all the targets simultaneously. We then use particle filtering on the reduced dimensional state of each target, independently

Parallelized Particle and Gaussian Sum Particle Filters for Large Scale Freeway Traffic Systems

Large scale traffic systems require techniques able to: 1) deal with high amounts of data and heterogenous data coming from different types of sensors, 2) provide robustness in the presence of sparse sensor data, 3) incorporate different models that can deal with various traffic regimes, 4) cope with multimodal conditional probability density functions for the states. Often centralized architectures face challenges due to high communication demands. This paper develops new estimation techniques able to cope with these problems of large traffic network systems. These are Parallelized Particle Filters (PPFs) and a Parallelized Gaussian Sum Particle Filter (PGSPF) that are suitable for on-line traffic management. We show how complex probability density functions of the high dimensional trafc state can be decomposed into functions with simpler forms and the whole estimation problem solved in an efcient way. The proposed approach is general, with limited interactions which reduces the computational time and provides high estimation accuracy. The efciency of the PPFs and PGSPFs is evaluated in terms of accuracy, complexity and communication demands and compared with the case where all processing is centralized

Localisation of mobile nodes in wireless networks with correlated in time measurement noise.

Wireless sensor networks are an inherent part of decision making, object tracking and location awareness systems. This work is focused on simultaneous localisation of mobile nodes based on received signal strength indicators (RSSIs) with correlated in time measurement noises. Two approaches to deal with the correlated measurement noises are proposed in the framework of auxiliary particle filtering: with a noise augmented state vector and the second approach implements noise decorrelation. The performance of the two proposed multi model auxiliary particle filters (MM AUX-PFs) is validated over simulated and real RSSIs and high localisation accuracy is demonstrated