78 research outputs found
Symphony: Localizing Multiple Acoustic Sources with a Single Microphone Array
Sound recognition is an important and popular function of smart devices. The
location of sound is basic information associated with the acoustic source.
Apart from sound recognition, whether the acoustic sources can be localized
largely affects the capability and quality of the smart device's interactive
functions. In this work, we study the problem of concurrently localizing
multiple acoustic sources with a smart device (e.g., a smart speaker like
Amazon Alexa). The existing approaches either can only localize a single
source, or require deploying a distributed network of microphone arrays to
function. Our proposal called Symphony is the first approach to tackle the
above problem with a single microphone array. The insight behind Symphony is
that the geometric layout of microphones on the array determines the unique
relationship among signals from the same source along the same arriving path,
while the source's location determines the DoAs (direction-of-arrival) of
signals along different arriving paths. Symphony therefore includes a
geometry-based filtering module to distinguish signals from different sources
along different paths and a coherence-based module to identify signals from the
same source. We implement Symphony with different types of commercial
off-the-shelf microphone arrays and evaluate its performance under different
settings. The results show that Symphony has a median localization error of
0.694m, which is 68% less than that of the state-of-the-art approach
Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers
Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement
Twenty-five years of sensor array and multichannel signal processing: a review of progress to date and potential research directions
In this article, a general introduction to the area of sensor array and multichannel signal processing is provided, including associated activities of the IEEE Signal Processing Society (SPS) Sensor Array and Multichannel (SAM) Technical Committee (TC). The main technological advances in five SAM subareas made in the past 25 years are then presented in detail, including beamforming, direction-of-arrival (DOA) estimation, sensor location optimization, target/source localization based on sensor arrays, and multiple-input multiple-output (MIMO) arrays. Six recent developments are also provided at the end to indicate possible promising directions for future SAM research, which are graph signal processing (GSP) for sensor networks; tensor-based array signal processing, quaternion-valued array signal processing, 1-bit and noncoherent sensor array signal processing, machine learning and artificial intelligence (AI) for sensor arrays; and array signal processing for next-generation communication systems
Interference modelling and management for cognitive radio networks
Radio spectrum is becoming increasingly scarce as more and more devices go wireless.
Meanwhile, studies indicate that the assigned spectrum is not fully utilised.
Cognitive radio (CR) technology is envisioned to be a promising solution to address
the imbalance between spectrum scarcity and spectrum underutilisation. It improves
the spectrum utilisation by reusing the unused or underutilised spectrum owned by
incumbent systems (primary systems). With the introduction of CR networks, two
types of interference originating from CR networks are introduced. They are the interference
from CR to primary networks (CR-primary interference) and the interference
among spectrum-sharing CR nodes (CR-CR interference). The interference should be
well controlled and managed in order not to jeopardise the operation of the primary
network and to improve the performance of CR systems. This thesis investigates the
interference in CR networks by modelling and mitigating the CR-primary interference
and analysing the CR-CR interference channels.
Firstly, the CR-primary interference is modelled for multiple CR nodes sharing the
spectrum with the primary system. The probability density functions of CR-primary
interference are derived for CR networks adopting different interference management
schemes. The relationship between CR operating parameters and the resulting CRprimary
interference is investigated. It sheds light on the deployment of CR networks
to better protect the primary system.
Secondly, various interference mitigation techniques that are applicable to CR networks
are reviewed. Two novel precoding schemes for CR multiple-input multipleoutput
(MIMO) systems are proposed to mitigate the CR-primary interference and
maximise the CR throughput. To further reduce the CR-primary interference, we also
approach interference mitigation from a cross-layer perspective by jointly considering
channel allocation in the media access control layer and precoding in the physical
layer of CR MIMO systems.
Finally, we analyse the underlying interference channels among spectrum-sharing CR
users when they interfere with each other. The Pareto rate region for multi-user MIMO
interference systems is characterised. Various rate region convexification schemes are
examined to convexify the rate region. Then, game theory is applied to the interference
system to coordinate the operation of each CR user. Nash bargaining over MIMO
interference systems is characterised as well.
The research presented in this thesis reveals the impact of CR operation on the resulting
CR-primary network, how to mitigate the CR-primary interference and how
to coordinate the spectrum-sharing CR users. It forms the fundamental basis for interference
management in CR systems and consequently gives insights into the design
and deployment of CR networks
Sensors and Systems for Indoor Positioning
This reprint is a reprint of the articles that appeared in Sensors' (MDPI) Special Issue on “Sensors and Systems for Indoor Positioning". The published original contributions focused on systems and technologies to enable indoor applications
- …