1,890 research outputs found
Fault injection on a mixed-signal programmable SoC with design diversity mitigation
This paper presents an approach for runtime software-based fault injection, applied to a commercial mixed-signal programmable system-on-chip (PSoC). The fault-injection scheme is based on a pseudo-random sequence gen erator and software interruption. A fault tolerant data acquisition system, based on a design diversity redundant scheme, is considered as case study. The fault injection is performed by intensively inserting bit flips in the peripherals control registers of the mixed-signal PSoC blocks, as well as in the SRAM memory of the device. Results allow to evaluate the applied fault tolerance technique, indicating that the system is able to tolerate most of the generated errors. Additionally, a high fault masking effect is observed, and different criticality levels are observed for faults injected into the SRAM memory and in the peripherals control registers
Reliability in Power Electronics and Power Systems
L'abstract è presente nell'allegato / the abstract is in the attachmen
SINGLE EVENT UPSET DETECTION IN FIELD PROGRAMMABLE GATE ARRAYS
The high-radiation environment in space can lead to anomalies in normal satellite operation. A major cause of concern to spacecraft-designers is the single event upset (SEU). SEUs can result in deviations from expected component behavior and are capable of causing irreversible damage to hardware. In particular, Field Programmable Gate Arrays (FPGAs) are known to be highly susceptible to SEUs. Radiation-hardened versions of such devices are associated with an increase in power consumption and cost in addition to being technologically inferior when compared to contemporary commercial-off-the-shelf (COTS) parts. This thesis consequently aims at exploring the option of using COTS FPGAs in satellite payloads. A framework is developed, allowing the SEU susceptibility of such a device to be studied. SEU testing is carried out in a software-simulated fault environment using a set of Java classes called JBits. A radiation detector module, to measure the radiation backdrop of the device, is also envisioned as part of the final design implementation
Electromagnetic Monitoring of Semiconductor Ageing
AbstractThis paper reports on the outcomes of the project “Electromagnetic Monitoring of Semiconductor Ageing” funded through the EPSRC Centre for Innovative Manufacturing in Through-life Engineering Services. The basis of the feasibility study reported in this paper is that all active devices exhibit non-linear behaviour and the behaviour of those devices will change as they age. As a result, the radiation or re-radiation of intermodulation products will change as the device ages. The goal of the project is to verify that this change in non-linear behaviour could be identified in a way that does not require modification of existing circuitry, thus allowing through-life and non-destructive monitoring of devices for signs of early deterioration. Results obtained from this work have been very encouraging and have set the scene for further development of the techniques to include degradation fingerprinting and system health monitoring
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors
Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above
- …