Comparison of manual and semi-automated delineation of regions of interest for radioligand PET imaging analysis

BACKGROUND As imaging centers produce higher resolution research scans, the number of man-hours required to process regional data has become a major concern. Comparison of automated vs. manual methodology has not been reported for functional imaging. We explored validation of using automation to delineate regions of interest on positron emission tomography (PET) scans. The purpose of this study was to ascertain improvements in image processing time and reproducibility of a semi-automated brain region extraction (SABRE) method over manual delineation of regions of interest (ROIs). METHODS We compared 2 sets of partial volume corrected serotonin 1a receptor binding potentials (BPs) resulting from manual vs. semi-automated methods. BPs were obtained from subjects meeting consensus criteria for frontotemporal degeneration and from age- and gender-matched healthy controls. Two trained raters provided each set of data to conduct comparisons of inter-rater mean image processing time, rank order of BPs for 9 PET scans, intra- and inter-rater intraclass correlation coefficients (ICC), repeatability coefficients (RC), percentages of the average parameter value (RM%), and effect sizes of either method. RESULTS SABRE saved approximately 3 hours of processing time per PET subject over manual delineation (p 0.8) for both methods. RC and RM% were lower for the manual method across all ROIs, indicating less intra-rater variance across PET subjects' BPs. CONCLUSION SABRE demonstrated significant time savings and no significant difference in reproducibility over manual methods, justifying the use of SABRE in serotonin 1a receptor radioligand PET imaging analysis. This implies that semi-automated ROI delineation is a valid methodology for future PET imaging analysis

A Framework of Vertebra Segmentation Using the Active Shape Model-Based Approach

We propose a medical image segmentation approach based on the Active Shape Model theory. We apply this method for cervical vertebra detection. The main advantage of this approach is the application of a statistical model created after a training stage. Thus, the knowledge and interaction of the domain expert intervene in this approach. Our application allows the use of two different models, that is, a global one (with several vertebrae) and a local one (with a single vertebra). Two modes of segmentation are also proposed: manual and semiautomatic. For the manual mode, only two points are selected by the user on a given image. The first point needs to be close to the lower anterior corner of the last vertebra and the second near the upper anterior corner of the first vertebra. These two points are required to initialize the segmentation process. We propose to use the Harris corner detector combined with three successive filters to carry out the semiautomatic process. The results obtained on a large set of X-ray images are very promising

Scaled, patient-specific 3D vertebral model reconstruction based on 2D lateral fluoroscopy

Backgrounds: Accurate three-dimensional (3D) models of lumbar vertebrae are required for image-based 3D kinematics analysis. MRI or CT datasets are frequently used to derive 3D models but have the disadvantages that they are expensive, time-consuming or involving ionizing radiation (e.g., CT acquisition). An alternative method using 2D lateral fluoroscopy was developed. Materials and methods: A technique was developed to reconstruct a scaled 3D lumbar vertebral model from a single two-dimensional (2D) lateral fluoroscopic image and a statistical shape model of the lumbar vertebrae. Four cadaveric lumbar spine segments and two statistical shape models were used for testing. Reconstruction accuracy was determined by comparison of the surface models reconstructed from the single lateral fluoroscopic images to the ground truth data from 3D CT segmentation. For each case, two different surface-based registration techniques were used to recover the unknown scale factor, and the rigid transformation between the reconstructed surface model and the ground truth model before the differences between the two discrete surface models were computed. Results: Successful reconstruction of scaled surface models was achieved for all test lumbar vertebrae based on single lateral fluoroscopic images. The mean reconstruction error was between 0.7 and 1.6mm. Conclusions: A scaled, patient-specific surface model of the lumbar vertebra from a single lateral fluoroscopic image can be synthesized using the present approach. This new method for patient-specific 3D modeling has potential applications in spine kinematics analysis, surgical planning, and navigatio

DoctorEye: A clinically driven multifunctional platform, for accurate processing of tumors in medical images

Copyright @ Skounakis et al.This paper presents a novel, open access interactive platform for 3D medical image analysis, simulation and visualization, focusing in oncology images. The platform was developed through constant interaction and feedback from expert clinicians integrating a thorough analysis of their requirements while having an ultimate goal of assisting in accurately delineating tumors. It allows clinicians not only to work with a large number of 3D tomographic datasets but also to efficiently annotate multiple regions of interest in the same session. Manual and semi-automatic segmentation techniques combined with integrated correction tools assist in the quick and refined delineation of tumors while different users can add different components related to oncology such as tumor growth and simulation algorithms for improving therapy planning. The platform has been tested by different users and over large number of heterogeneous tomographic datasets to ensure stability, usability, extensibility and robustness with promising results. AVAILABILITY: THE PLATFORM, A MANUAL AND TUTORIAL VIDEOS ARE AVAILABLE AT: http://biomodeling.ics.forth.gr. It is free to use under the GNU General Public License

Computerized Analysis of Magnetic Resonance Images to Study Cerebral Anatomy in Developing Neonates

The study of cerebral anatomy in developing neonates is of great importance for the understanding of brain development during the early period of life. This dissertation therefore focuses on three challenges in the modelling of cerebral anatomy in neonates during brain development. The methods that have been developed all use Magnetic Resonance Images (MRI) as source data. To facilitate study of vascular development in the neonatal period, a set of image analysis algorithms are developed to automatically extract and model cerebral vessel trees. The whole process consists of cerebral vessel tracking from automatically placed seed points, vessel tree generation, and vasculature registration and matching. These algorithms have been tested on clinical Time-of- Flight (TOF) MR angiographic datasets. To facilitate study of the neonatal cortex a complete cerebral cortex segmentation and reconstruction pipeline has been developed. Segmentation of the neonatal cortex is not effectively done by existing algorithms designed for the adult brain because the contrast between grey and white matter is reversed. This causes pixels containing tissue mixtures to be incorrectly labelled by conventional methods. The neonatal cortical segmentation method that has been developed is based on a novel expectation-maximization (EM) method with explicit correction for mislabelled partial volume voxels. Based on the resulting cortical segmentation, an implicit surface evolution technique is adopted for the reconstruction of the cortex in neonates. The performance of the method is investigated by performing a detailed landmark study. To facilitate study of cortical development, a cortical surface registration algorithm for aligning the cortical surface is developed. The method first inflates extracted cortical surfaces and then performs a non-rigid surface registration using free-form deformations (FFDs) to remove residual alignment. Validation experiments using data labelled by an expert observer demonstrate that the method can capture local changes and follow the growth of specific sulcus

One Step before 3D Printing\u2014Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandible: A Comparative Study Using a Surface-to-Surface Matching Technique

Abstract: The accuracy of 3D reconstructions of the craniomaxillofacial region using cone beam computed tomography (CBCT) is important for the morphological evaluation of specific anatomical structures. Moreover, an accurate segmentation process is fundamental for the physical reconstruction of the anatomy (3D printing) when a preliminary simulation of the therapy is required. In this regard, the objective of this study is to evaluate the accuracy of four dierent types of software for the semiautomatic segmentation of the mandibular jaw compared to manual segmentation, used as a gold standard. Twenty cone beam computed tomography (CBCT) with a manual approach (Mimics) and a semi-automatic approach (Invesalius, ITK-Snap, Dolphin 3D, Slicer 3D) were selected for the segmentation of the mandible in the present study. The accuracy of semi-automatic segmentation was evaluated: (1) by comparing the mandibular volumes obtained with semi-automatic 3D rendering and manual segmentation and (2) by deviation analysis between the two mandibular models. An analysis of variance (ANOVA) was used to evaluate dierences in mandibular volumetric recordings and for a deviation analysis among the dierent software types used. Linear regression was also performed between manual and semi-automatic methods. No significant dierences were found in the total volumes among the obtained 3D mandibular models (Mimics = 40.85 cm3, ITK-Snap = 40.81 cm3, Invesalius = 40.04 cm3, Dolphin 3D = 42.03 cm3, Slicer 3D = 40.58 cm3). High correlations were found between the semi-automatic segmentation and manual segmentation approach, with R coecients ranging from 0,960 to 0,992. According to the deviation analysis, the mandibular models obtained with ITK-Snap showed the highest matching percentage (Tolerance A = 88.44%, Tolerance B = 97.30%), while those obtained with Dolphin 3D showed the lowest matching percentage (Tolerance A = 60.01%, Tolerance B = 87.76%) (p < 0.05). Colour-coded maps showed that the area of greatest mismatch between semi-automatic and manual segmentation was the condylar region and the region proximate to the dental roots. Despite the fact that the semi-automatic segmentation of the mandible showed, in general, high reliability and high correlation with the manual segmentation, caution should be taken when evaluating the morphological and dimensional characteristics of the condyles either on CBCT-derived digital models or physical models (3D printing)

Automatic Abdominal Organ Segmentation from CT images

In the recent years a great deal of research work has been devoted to the development of semi-automatic and automatic techniques for the analysis of abdominal CT images. Some of the current interests are the automatic diagnosis of liver, spleen, and kidney pathologies and the 3D volume rendering of the abdominal organs. The first and fundamental step in all these studies is the automatic organs segmentation, that is still an open problem. In this paper we propose our fully automatic system that employs a hierarchical gray level based framework to segment heart, bones (i.e. ribs and spine), liver and its blood vessels, kidneys, and spleen. The overall system has been evaluated on the data of 100 patients, obtaining a good assessment both by visual inspection by three experts, and by comparing the computed results to the boundaries manually traced by experts

Three-dimensional semiautomatic liver segmentation method for non-contrast computed tomography based on a correlation map of locoregional histogram and probabilistic atlas

Background: We sought to evaluate a new regional segmentation method for use with three-dimensional (3D) non-contrast abdominal CT images and to report the preliminary results. Methods: The proposed method was evaluated in ten cases. Manually segmented areas were used as the gold standard for evaluation. To compare the standard and the extracted liver regions, the degree of coincidence R% was redefined by transforming a volumetric overlap error. We also evaluated the influence of varying the density window size in terms of setting the starting points. Results: We confirmed in ten cases that our method could segment the liver region more precisely than the conventional method. A size of window 15 voxels was optimal as the starting point in all cases. Conclusions: We demonstrated the accuracy of a 3D semiautomatic liver segmentation method for non-contrast CT. This method promises to offer radiologists a time-efficient segmentation aid.Yamaguchi S., Satake K., Yamaji Y., et al. Three-dimensional semiautomatic liver segmentation method for non-contrast computed tomography based on a correlation map of locoregional histogram and probabilistic atlas. Computers in Biology and Medicine 55, 79 (2014); https://doi.org/10.1016/j.compbiomed.2014.10.003

Active Subdivision Surfaces for the Semiautomatic Segmentation of Biomedical Volumes

International audienceWe present a new family of active surfaces for the semiautomatic segmentation of volumetric objects in 3D biomedical images. We represent our deformable model by a subdivision surface encoded by a small set of control points and generated through a geometric refinement process. The subdivision operator confers important properties to the surface such as smoothness, reproduction of desirable shapes and interpolation of the control points. We deform the subdivision surface through the minimization of suitable gradient-based and region-based energy terms that we have designed for that purpose. In addition, we provide an easy way to combine these energies with convolutional neural networks. Our active subdivision surface satisfies the property of multiresolution, which allows us to adopt a coarse-tofine optimization strategy. This speeds up the computations and decreases its dependence on initialization compared to singleresolution active surfaces. Performance evaluations on both synthetic and real biomedical data show that our active subdivision surface is robust in the presence of noise and outperforms current stateof-the-art methods. In addition, we provide a software that gives full control over the active subdivision surface via an intuitive manipulation of the control points

Methodology for extensive evaluation of semiautomatic and interactive segmentation algorithms using simulated Interaction models

Performance of semiautomatic and interactive segmentation(SIS) algorithms are usually evaluated by employing a small number of human operators to segment the images. The human operators typically provide the approximate location of objects of interest and their boundaries in an interactive phase, which is followed by an automatic phase where the segmentation is performed under the constraints of the operator-provided guidance. The segmentation results produced from this small set of interactions do not represent the true capability and potential of the algorithm being evaluated. For example, due to inter-operator variability, human operators may make choices that may provide either overestimated or underestimated results. As well, their choices may not be realistic when compared to how the algorithm is used in the field, since interaction may be influenced by operator fatigue and lapses in judgement. Other drawbacks to using human operators to assess SIS algorithms, include: human error, the lack of available expert users, and the expense. A methodology for evaluating segmentation performance is proposed here which uses simulated Interaction models to programmatically generate large numbers of interactions to ensure the presence of interactions throughout the object region. These interactions are used to segment the objects of interest and the resulting segmentations are then analysed using statistical methods. The large number of interactions generated by simulated interaction models capture the variabilities existing in the set of user interactions by considering each and every pixel inside the entire region of the object as a potential location for an interaction to be placed with equal probability. Due to the practical limitation imposed by the enormous amount of computation for the enormous number of possible interactions, uniform sampling of interactions at regular intervals is used to generate the subset of all possible interactions which still can represent the diverse pattern of the entire set of interactions. Categorization of interactions into different groups, based on the position of the interaction inside the object region and texture properties of the image region where the interaction is located, provides the opportunity for fine-grained algorithm performance analysis based on these two criteria. Application of statistical hypothesis testing make the analysis more accurate, scientific and reliable in comparison to conventional evaluation of semiautomatic segmentation algorithms. The proposed methodology has been demonstrated by two case studies through implementation of seven different algorithms using three different types of interaction modes making a total of nine segmentation applications to assess the efficacy of the methodology. Application of this methodology has revealed in-depth, fine details about the performance of the segmentation algorithms which currently existing methods could not achieve due to the absence of a large, unbiased set of interactions. Practical application of the methodology for a number of algorithms and diverse interaction modes have shown its feasibility and generality for it to be established as an appropriate methodology. Development of this methodology to be used as a potential application for automatic evaluation of the performance of SIS algorithms looks very promising for users of image segmentation