Fire performance of residential shipping containers designed with a shaft wall system

seven story building made of shipping containers is planned to be built in Barcelona, Spain. This study mainly aimed to evaluate the fire performance of one of these residential shipping containers whose walls and ceiling will have a shaft wall system installed. The default assembly consisted of three fire resistant gypsum boards for vertical panels and a mineral wool layer within the framing system. This work aimed to assess if system variants (e.g. less gypsum boards, no mineral wool layer) could still be adequate considering fire resistance purposes. To determine if steel temperatures would attain a predetermined temperature of 300-350ºC (a temperature value above which mechanical properties of steel start to change significantly) the temperature evolution within the shaft wall system and the corrugated steel profile of the container was analysed under different fire conditions. Diamonds simulator (v. 2020; Buildsoft) was used to perform the heat transfer analysis from the inside surface of the container (where the fire source was present) and within the shaft wall and the corrugated profile. To do so gas temperatures near the walls and the ceiling were required, so these temperatures were obtained from two sources: (1) The standard fire curve ISO834; (2) CFD simulations performed using the Fire Dynamics Simulator (FDS). Post-flashover fire scenarios were modelled in FDS taking into account the type of fuel present in residential buildings according to international standards. The results obtained indicate that temperatures lower than 350ºC were attained on the ribbed steel sheet under all the tested heat exposure conditions. When changing the assembly by removing the mineral wool layer, fire resistance was found to still be adequate. Therefore, under the tested conditions, the structural response of the containers would comply with fire protection standards, even in the case where insulation was reduced.Postprint (published version

Encouraging the expression of the unspeakable : influence and agency in a robotic creature

Thesis (S.M.)--Massachusetts Institute of Technology, School of Architecture and Planning, Program in Media Arts and Sciences, 2007.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 165-177) and index.The boundary between subject and object is becoming ever-the-more blurred by the creation of new types of computational objects. Especially when these objects take the form of robotic creatures do we get to question the powerful impact of the object on the person. Couple this with the expression of internal, unspoken experience through the making of non-speech sounds and we have a situation that demands new thoughts and new methodologies. This thesis works through these questions via the design and study of syngvab, a robotic marionette that moves in response to human non-speech vocal sounds. I draw from the world of puppetry and performing objects in the creation of syngvab the object and its stage, showing how this old tradition is directly relevant for the development of non-anthropomorphic, non-zoomorphic robotic creatures. I show how this mongrel of an object requires different methodologies of study, pulling from actor-network theory to examine syngvab in a symmetric manner with the human participants. The results of a case study interaction with syngvab support the contention that non-speech sounds as drawn out by a robotic creature are a potent means of exploring and investigating the unspeakable.by Nicholas A. Knouf.S.M

Geotechnical Engineering for the Preservation of Monuments and Historic Sites III

The conservation of monuments and historic sites is one of the most challenging problems facing modern civilization. It involves, in inextricable patterns, factors belonging to different fields (cultural, humanistic, social, technical, economical, administrative) and the requirements of safety and use appear to be (or often are) in conflict with the respect of the integrity of the monuments. The complexity of the topic is such that a shared framework of reference is still lacking among art historians, architects, structural and geotechnical engineers. The complexity of the subject is such that a shared frame of reference is still lacking among art historians, architects, architectural and geotechnical engineers. And while there are exemplary cases of an integral approach to each building element with its static and architectural function, as a material witness to the culture and construction techniques of the original historical period, there are still examples of uncritical reliance on modern technology leading to the substitution from earlier structures to new ones, preserving only the iconic look of the original monument. Geotechnical Engineering for the Preservation of Monuments and Historic Sites III collects the contributions to the eponymous 3rd International ISSMGE TC301 Symposium (Naples, Italy, 22-24 June 2022). The papers cover a wide range of topics, which include: 　 - Principles of conservation, maintenance strategies, case histories - The knowledge: investigations and monitoring - Seismic risk, site effects, soil structure interaction - Effects of urban development and tunnelling on built heritage - Preservation of diffuse heritage: soil instability, subsidence, environmental damages The present volume aims at geotechnical engineers and academics involved in the preservation of monuments and historic sites worldwide

Conference on Intelligent Robotics in Field, Factory, Service, and Space (CIRFFSS 1994), volume 1

The AIAA/NASA Conference on Intelligent Robotics in Field, Factory, Service, and Space (CIRFFSS '94) was originally proposed because of the strong belief that America's problems of global economic competitiveness and job creation and preservation can partly be solved by the use of intelligent robotics, which are also required for human space exploration missions. Individual sessions addressed nuclear industry, agile manufacturing, security/building monitoring, on-orbit applications, vision and sensing technologies, situated control and low-level control, robotic systems architecture, environmental restoration and waste management, robotic remanufacturing, and healthcare applications