Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols

In this paper, we describe direct-sequence code-division multiple-access (DS-CDMA) systems with quadriphase-shift keying in which channel estimation, coherent demodulation, and decoding are iteratively performed without the use of any training or pilot symbols. An expectation-maximization channel-estimation algorithm for the fading amplitude, phase, and the interference power spectral density (PSD) due to the combined interference and thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate codes. After initial estimates of the fading amplitude, phase, and interference PSD are obtained from the received symbols, subsequent values of these parameters are iteratively updated by using the soft feedback from the channel decoder. The updated estimates are combined with the received symbols and iteratively passed to the decoder. The elimination of pilot symbols simplifies the system design and allows either an enhanced information throughput, an improved bit error rate, or greater spectral efficiency. The interference-PSD estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication

Channel estimation, data detection and carrier frequency offset estimation in OFDM systems

Orthogonal Frequency Division Multiplexing (OFDM) plays an important role in the implementation of high data rate communication. In this thesis, the problems of data detection and channel and carrier frequency offset estimation in OFDM systems are studied. Multi-symbol non-coherent data detection is studied which performs data detection by processing multiple symbols without the knowledge of the channel impulse response (CIR). For coherent data detection, the CIR needs to be estimated. Our objective in this thesis is to work on blind channel estimators which can extract the CIR using just one block of received OFDM data. A blind channel estimator for (Single Input Multi Output) SIMO OFDM systems is derived. The conditions under which the estimator is identifiable is studied and solutions to resolve the phase ambiguity of the proposed estimator are given.A channel estimator for superimposed OFDM systems is proposed and its CRB is derived. The idea of simultaneous transmission of pilot and data symbols on each subcarrier, the so called superimposed technique, introduces the efficient use of bandwidth in OFDM context. Pilot symbols can be added to data symbols to enable CIR estimation without sacrificing the data rate. Despite the many advantages of OFDM, it suffers from sensitivity to carrier frequency offset (CFO). CFO destroys the orthogonality between the subcarriers. Thus, it is necessary for the receiver to estimate and compensate for the frequency offset. Several high accuracy estimators are derived. These include CFO estimators, as well as a joint iterative channel/CFO estimator/data detector for superimposed OFDM. The objective is to achieve CFO estimation with using just one OFDM block of received data and without the knowledge of CIR

Estimation and detection techniques for doubly-selective channels in wireless communications

A fundamental problem in communications is the estimation of the channel. The signal transmitted through a communications channel undergoes distortions so that it is often received in an unrecognizable form at the receiver. The receiver must expend significant signal processing effort in order to be able to decode the transmit signal from this received signal. This signal processing requires knowledge of how the channel distorts the transmit signal, i.e. channel knowledge. To maintain a reliable link, the channel must be estimated and tracked by the receiver. The estimation of the channel at the receiver often proceeds by transmission of a signal called the 'pilot' which is known a priori to the receiver. The receiver forms its estimate of the transmitted signal based on how this known signal is distorted by the channel, i.e. it estimates the channel from the received signal and the pilot. This design of the pilot is a function of the modulation, the type of training and the channel. [Continues.

Location-Aware Cross-Layer Design Using Overlay Watermarks

A new orthogonal frequency division multiplexing (OFDM) system embedded with overlay watermarks for location-aware cross-layer design is proposed in this paper. One major advantage of the proposed system is the multiple functionalities the overlay watermark provides, which includes a cross-layer signaling interface, a transceiver identification for position-aware routing, as well as its basic role as a training sequence for channel estimation. Wireless terminals are typically battery powered and have limited wireless communication bandwidth. Therefore, efficient collaborative signal processing algorithms that consume less energy for computation and less bandwidth for communication are needed. Transceiver aware of its location can also improve the routing efficiency by selective flooding or selective forwarding data only in the desired direction, since in most cases the location of a wireless host is unknown. In the proposed OFDM system, location information of a mobile for efficient routing can be easily derived when a unique watermark is associated with each individual transceiver. In addition, cross-layer signaling and other interlayer interactive information can be exchanged with a new data pipe created by modulating the overlay watermarks. We also study the channel estimation and watermark removal techniques at the physical layer for the proposed overlay OFDM. Our channel estimator iteratively estimates the channel impulse response and the combined signal vector from the overlay OFDM signal. Cross-layer design that leads to low-power consumption and more efficient routing is investigated

Pilot based channel estimation improvement in orthogonal frequency-division multiplexing systems using linear predictive coding

Pilot based least square (LS) channel estimation is a commonly used channel estimation technique in orthogonal frequency-division multiplexing based systems due to its simplicity. However, LS estimation does not handle the noise effect and hence suffers from performance degradation. Since the channel coefficients are correlated in time and hence show a slower variation than the noise, it is possible to encode the channel using linear predictive coding (LPC) without the noise. In this work, the channel is estimated from the pilots using LS estimation and in a second step the channel’s LS estimated is encoded as LPC coefficients to produce an improved channel estimation. The estimation technique is simulated for space-time block coding (STBC) based orthogonal frequency-division multiplexing (OFDM) system and the bit error rate (BER) curves show improvement of the LPC estimation over the LS estimation of the channel

Implementation and Analysis of Spectral Subtraction and Signal Separation in Deterministic Wide-Band Anti-Jamming Scenarios

With the increasing volume of wireless traffic that military operations require, the likelihood of transmissions interfering with each other is steadily growing to the point that new techniques need to be employed. Furthermore, to combat remotely operated improvised explosive devices, many ground convoys transmit high-power broadband jamming signals, which block both hostile as well as friendly communications. These wide-band jamming fields pose a serious technical challenge to existing anti-jamming solutions that are currently employed by the Navy and Marine Corps. This thesis examines the feasibility of removing such deterministic jammers from the spectral environment, enabling friendly communications. Anti-jamming solutions in self-jamming environments are rarely considered in the literature, principally due to the non-traditional nature of such jamming techniques. As a result, a combination of approaches are examined which include: Antenna Subset Selection, Spectral Subtraction, and Source Separation. These are combined to reduce environmental interference for reliable transmissions. Specific operational conditions are considered and evaluated, primarily to define the limitations and utility of such a system. A final prototype was constructed using a collection of USRP software defined radios, providing solid conclusions of the overall system performance

Channel Estimation in Coded Modulation Systems

With the outstanding performance of coded modulation techniques in fading channels, much research efforts have been carried out on the design of communication systems able to operate at low signal-to-noise ratios (SNRs). From this perspective, the so-called iterative decoding principle has been applied to many signal processing tasks at the receiver: demodulation, detection, decoding, synchronization and channel estimation. Nevertheless, at low SNRs, conventional channel estimators do not perform satisfactorily. This thesis is mainly concerned with channel estimation issues in coded modulation systems where different diversity techniques are exploited to combat fading in single or multiple antenna systems. First, for single antenna systems in fast time-varying fading channels, the thesis focuses on designing a training sequence by exploiting signal space diversity (SSD). Motivated by the power/bandwidth efficiency of the SSD technique, the proposed training sequence inserts pilot bits into the coded bits prior to constellation mapping and signal rotation. This scheme spreads the training sequence during a transmitted codeword and helps the estimator to track fast variation of the channel gains. A comprehensive comparison between the proposed training scheme and the conventional training scheme is then carried out, which reveals several interesting conclusions with respect to both error performance of the system and mean square error of the channel estimator. For multiple antenna systems, different schemes are examined in this thesis for the estimation of block-fading channels. For typical coded modulation systems with multiple antennas, the first scheme makes a distinction between the iteration in the channel estimation and the iteration in the decoding. Then, the estimator begins iteration when the soft output of the decoder at the decoding iteration meets some specified reliability conditions. This scheme guarantees the convergence of the iterative receiver with iterative channel estimator. To accelerate the convergence process and decrease the complexity of successive iterations, in the second scheme, the channel estimator estimates channel state information (CSI) at each iteration with a combination of the training sequence and soft information. For coded modulation systems with precoding technique, in which a precoder is used after the modulator, the training sequence and data symbols are combined using a linear precoder to decrease the required training overhead. The power allocation and the placement of the training sequence to be precoded are obtained based on a lower bound on the mean square error of the channel estimation. It is demonstrated that considerable performance improvement is possible when the training symbols are embedded within data symbols with an equi-spaced pattern. In the last scheme, a joint precoder and training sequence is developed to maximize the achievable coding gain and diversity order under imperfect CSI. In particular, both the asymptotic performance behavior of the system with the precoded training scheme under imperfect CSI and the mean square error of the channel estimation are derived to obtain achievable diversity order and coding gain. Simulation results demonstrate that the joint optimized scheme outperforms the existing training schemes for systems with given precoders in terms of error rate and the amount of training overhead

Review of Recent Trends

This work was partially supported by the European Regional Development Fund (FEDER), through the Regional Operational Programme of Centre (CENTRO 2020) of the Portugal 2020 framework, through projects SOCA (CENTRO-01-0145-FEDER-000010) and ORCIP (CENTRO-01-0145-FEDER-022141). Fernando P. Guiomar acknowledges a fellowship from “la Caixa” Foundation (ID100010434), code LCF/BQ/PR20/11770015. Houda Harkat acknowledges the financial support of the Programmatic Financing of the CTS R&D Unit (UIDP/00066/2020).MIMO-OFDM is a key technology and a strong candidate for 5G telecommunication systems. In the literature, there is no convenient survey study that rounds up all the necessary points to be investigated concerning such systems. The current deeper review paper inspects and interprets the state of the art and addresses several research axes related to MIMO-OFDM systems. Two topics have received special attention: MIMO waveforms and MIMO-OFDM channel estimation. The existing MIMO hardware and software innovations, in addition to the MIMO-OFDM equalization techniques, are discussed concisely. In the literature, only a few authors have discussed the MIMO channel estimation and modeling problems for a variety of MIMO systems. However, to the best of our knowledge, there has been until now no review paper specifically discussing the recent works concerning channel estimation and the equalization process for MIMO-OFDM systems. Hence, the current work focuses on analyzing the recently used algorithms in the field, which could be a rich reference for researchers. Moreover, some research perspectives are identified.publishersversionpublishe