Safe Concurrency Introduction through Slicing

Traditional refactoring is about modifying the structure of existing code without changing its behaviour, but with the aim of making code easier to understand, modify, or reuse. In this paper, we introduce three novel refactorings for retrofitting concurrency to Erlang applications, and demonstrate how the use of program slicing makes the automation of these refactorings possible

A compiler extension for parallelizing arrays automatically on the cell heterogeneous processor

This paper describes the approaches taken to extend an array programming language compiler using a Virtual SIMD Machine (VSM) model for parallelizing array operations on Cell Broadband Engine heterogeneous machine. This development is part of ongoing work at the University of Glasgow for developing array compilers that are beneficial for applications in many areas such as graphics, multimedia, image processing and scientific computation. Our extended compiler, which is built upon the VSM interface, eases the parallelization processes by allowing automatic parallelisation without the need for any annotations or process directives. The preliminary results demonstrate significant improvement especially on data-intensive applications

Accelerating sequential programs using FastFlow and self-offloading

FastFlow is a programming environment specifically targeting cache-coherent shared-memory multi-cores. FastFlow is implemented as a stack of C++ template libraries built on top of lock-free (fence-free) synchronization mechanisms. In this paper we present a further evolution of FastFlow enabling programmers to offload part of their workload on a dynamically created software accelerator running on unused CPUs. The offloaded function can be easily derived from pre-existing sequential code. We emphasize in particular the effective trade-off between human productivity and execution efficiency of the approach.Comment: 17 pages + cove

Refactoring GrPPI:Generic Refactoring for Generic Parallelism in C++

Funding: EU Horizon 2020 project, TeamPlay (https://www.teamplay-xh2020.eu), Grant Number 779882, UK EPSRC Discovery, grant number EP/P020631/1, and Madrid Regional Government, CABAHLA-CM (ConvergenciA Big dAta-Hpc: de Los sensores a las Aplicaciones) Grant Number S2018/TCS-4423.The Generic Reusable Parallel Pattern Interface (GrPPI) is a very useful abstraction over different parallel pattern libraries, allowing the programmer to write generic patterned parallel code that can easily be compiled to different backends such as FastFlow, OpenMP, Intel TBB and C++ threads. However, rewriting legacy code to use GrPPI still involves code transformations that can be highly non-trivial, especially for programmers who are not experts in parallelism. This paper describes software refactorings to semi-automatically introduce instances of GrPPI patterns into sequential C++ code, as well as safety checking static analysis mechanisms which verify that introducing patterns into the code does not introduce concurrency-related bugs such as race conditions. We demonstrate the refactorings and safety-checking mechanisms on four simple benchmark applications, showing that we are able to obtain, with little effort, GrPPI-based parallel versions that accomplish good speedups (comparable to those of manually-produced parallel versions) using different pattern backends.Publisher PDFPeer reviewe

Programming Heterogeneous Parallel Machines Using Refactoring and Monte-Carlo Tree Search

Funding: This work was supported by the EU Horizon 2020 project, TeamPlay, Grant Number 779882, and UK EPSRC Discovery, Grant Number EP/P020631/1.This paper presents a new technique for introducing and tuning parallelism for heterogeneous shared-memory systems (comprising a mixture of CPUs and GPUs), using a combination of algorithmic skeletons (such as farms and pipelines), Monte–Carlo tree search for deriving mappings of tasks to available hardware resources, and refactoring tool support for applying the patterns and mappings in an easy and effective way. Using our approach, we demonstrate easily obtainable, significant and scalable speedups on a number of case studies showing speedups of up to 41 over the sequential code on a 24-core machine with one GPU. We also demonstrate that the speedups obtained by mappings derived by the MCTS algorithm are within 5–15% of the best-obtained manual parallelisation.Publisher PDFPeer reviewe

Programming models to support data science workflows

Data Science workflows have become a must to progress in many scientific areas such as life, health, and earth sciences. In contrast to traditional HPC workflows, they are more heterogeneous; combining binary executions, MPI simulations, multi-threaded applications, custom analysis (possibly written in Java, Python, C/C++ or R), and real-time processing. Furthermore, in the past, field experts were capable of programming and running small simulations. However, nowadays, simulations requiring hundreds or thousands of cores are widely used and, to this point, efficiently programming them becomes a challenge even for computer sciences. Thus, programming languages and models make a considerable effort to ease the programmability while maintaining acceptable performance. This thesis contributes to the adaptation of High-Performance frameworks to support the needs and challenges of Data Science workflows by extending COMPSs, a mature, general-purpose, task-based, distributed programming model. First, we enhance our prototype to orchestrate different frameworks inside a single programming model so that non-expert users can build complex workflows where some steps require highly optimised state of the art frameworks. This extension includes the @binary, @OmpSs, @MPI, @COMPSs, and @MultiNode annotations for both Java and Python workflows. Second, we integrate container technologies to enable developers to easily port, distribute, and scale their applications to distributed computing platforms. This combination provides a straightforward methodology to parallelise applications from sequential codes along with efficient image management and application deployment that ease the packaging and distribution of applications. We distinguish between static, HPC, and dynamic container management and provide representative use cases for each scenario using Docker, Singularity, and Mesos. Third, we design, implement and integrate AutoParallel, a Python module to automatically find an appropriate task-based parallelisation of affine loop nests and execute them in parallel in a distributed computing infrastructure. It is based on sequential programming and requires one single annotation (the @parallel Python decorator) so that anyone with intermediate-level programming skills can scale up an application to hundreds of cores. Finally, we propose a way to extend task-based management systems to support continuous input and output data to enable the combination of task-based workflows and dataflows (Hybrid Workflows) using one single programming model. Hence, developers can build complex Data Science workflows with different approaches depending on the requirements without the effort of combining several frameworks at the same time. Also, to illustrate the capabilities of Hybrid Workflows, we have built a Distributed Stream Library that can be easily integrated with existing task-based frameworks to provide support for dataflows. The library provides a homogeneous, generic, and simple representation of object and file streams in both Java and Python; enabling complex workflows to handle any data type without dealing directly with the streaming back-end.Els fluxos de treball de Data Science s’han convertit en una necessitat per progressar en moltes àrees científiques com les ciències de la vida, la salut i la terra. A diferència dels fluxos de treball tradicionals per a la CAP, els fluxos de Data Science són més heterogenis; combinant l’execució de binaris, simulacions MPI, aplicacions multiprocés, anàlisi personalitzats (possiblement escrits en Java, Python, C / C ++ o R) i computacions en temps real. Mentre que en el passat els experts de cada camp eren capaços de programar i executar petites simulacions, avui dia, aquestes simulacions representen un repte fins i tot per als experts ja que requereixen centenars o milers de nuclis. Per aquesta raó, els llenguatges i models de programació actuals s’esforcen considerablement en incrementar la programabilitat mantenint un rendiment acceptable. Aquesta tesi contribueix a l’adaptació de models de programació per a la CAP per afrontar les necessitats i reptes dels fluxos de Data Science estenent COMPSs, un model de programació distribuïda madur, de propòsit general, i basat en tasques. En primer lloc, millorem el nostre prototip per orquestrar diferent programari per a que els usuaris no experts puguin crear fluxos complexos usant un únic model on alguns passos requereixin tecnologies altament optimitzades. Aquesta extensió inclou les anotacions de @binary, @OmpSs, @MPI, @COMPSs, i @MultiNode per a fluxos en Java i Python. En segon lloc, integrem tecnologies de contenidors per permetre als desenvolupadors portar, distribuir i escalar fàcilment les seves aplicacions en plataformes distribuïdes. A més d’una metodologia senzilla per a paral·lelitzar aplicacions a partir de codis seqüencials, aquesta combinació proporciona una gestió d’imatges i una implementació d’aplicacions eficients que faciliten l’empaquetat i la distribució d’aplicacions. Distingim entre la gestió de contenidors estàtica, CAP i dinàmica i proporcionem casos d’ús representatius per a cada escenari amb Docker, Singularity i Mesos. En tercer lloc, dissenyem, implementem i integrem AutoParallel, un mòdul de Python per determinar automàticament la paral·lelització basada en tasques de nius de bucles afins i executar-los en paral·lel en una infraestructura distribuïda. AutoParallel està basat en programació seqüencial, requereix una sola anotació (el decorador @parallel) i permet a un usuari intermig escalar una aplicació a centenars de nuclis. Finalment, proposem una forma d’estendre els sistemes basats en tasques per admetre dades d’entrada i sortida continus; permetent així la combinació de fluxos de treball i dades (Fluxos Híbrids) en un únic model. Conseqüentment, els desenvolupadors poden crear fluxos complexos seguint diferents patrons sense l’esforç de combinar diversos models al mateix temps. A més, per a il·lustrar les capacitats dels Fluxos Híbrids, hem creat una biblioteca (DistroStreamLib) que s’integra fàcilment amb els models basats en tasques per suportar fluxos de dades. La biblioteca proporciona una representació homogènia, genèrica i simple de seqüències contínues d’objectes i arxius en Java i Python; permetent gestionar qualsevol tipus de dades sense tractar directament amb el back-end de streaming.Los flujos de trabajo de Data Science se han convertido en una necesidad para progresar en muchas áreas científicas como las ciencias de la vida, la salud y la tierra. A diferencia de los flujos de trabajo tradicionales para la CAP, los flujos de Data Science son más heterogéneos; combinando la ejecución de binarios, simulaciones MPI, aplicaciones multiproceso, análisis personalizados (posiblemente escritos en Java, Python, C/C++ o R) y computaciones en tiempo real. Mientras que en el pasado los expertos de cada campo eran capaces de programar y ejecutar pequeñas simulaciones, hoy en día, estas simulaciones representan un desafío incluso para los expertos ya que requieren cientos o miles de núcleos. Por esta razón, los lenguajes y modelos de programación actuales se esfuerzan considerablemente en incrementar la programabilidad manteniendo un rendimiento aceptable. Esta tesis contribuye a la adaptación de modelos de programación para la CAP para afrontar las necesidades y desafíos de los flujos de Data Science extendiendo COMPSs, un modelo de programación distribuida maduro, de propósito general, y basado en tareas. En primer lugar, mejoramos nuestro prototipo para orquestar diferentes software para que los usuarios no expertos puedan crear flujos complejos usando un único modelo donde algunos pasos requieran tecnologías altamente optimizadas. Esta extensión incluye las anotaciones de @binary, @OmpSs, @MPI, @COMPSs, y @MultiNode para flujos en Java y Python. En segundo lugar, integramos tecnologías de contenedores para permitir a los desarrolladores portar, distribuir y escalar fácilmente sus aplicaciones en plataformas distribuidas. Además de una metodología sencilla para paralelizar aplicaciones a partir de códigos secuenciales, esta combinación proporciona una gestión de imágenes y una implementación de aplicaciones eficientes que facilitan el empaquetado y la distribución de aplicaciones. Distinguimos entre gestión de contenedores estática, CAP y dinámica y proporcionamos casos de uso representativos para cada escenario con Docker, Singularity y Mesos. En tercer lugar, diseñamos, implementamos e integramos AutoParallel, un módulo de Python para determinar automáticamente la paralelización basada en tareas de nidos de bucles afines y ejecutarlos en paralelo en una infraestructura distribuida. AutoParallel está basado en programación secuencial, requiere una sola anotación (el decorador @parallel) y permite a un usuario intermedio escalar una aplicación a cientos de núcleos. Finalmente, proponemos una forma de extender los sistemas basados en tareas para admitir datos de entrada y salida continuos; permitiendo así la combinación de flujos de trabajo y datos (Flujos Híbridos) en un único modelo. Consecuentemente, los desarrolladores pueden crear flujos complejos siguiendo diferentes patrones sin el esfuerzo de combinar varios modelos al mismo tiempo. Además, para ilustrar las capacidades de los Flujos Híbridos, hemos creado una biblioteca (DistroStreamLib) que se integra fácilmente a los modelos basados en tareas para soportar flujos de datos. La biblioteca proporciona una representación homogénea, genérica y simple de secuencias continuas de objetos y archivos en Java y Python; permitiendo manejar cualquier tipo de datos sin tratar directamente con el back-end de streaming

Separation logic for high-level synthesis

High-level synthesis (HLS) promises a significant shortening of the digital hardware design cycle by raising the abstraction level of the design entry to high-level languages such as C/C++. However, applications using dynamic, pointer-based data structures remain difficult to implement well, yet such constructs are widely used in software. Automated optimisations that leverage the memory bandwidth of dedicated hardware implementations by distributing the application data over separate on-chip memories and parallelise the implementation are often ineffective in the presence of dynamic data structures, due to the lack of an automated analysis that disambiguates pointer-based memory accesses. This thesis takes a step towards closing this gap. We explore recent advances in separation logic, a rigorous mathematical framework that enables formal reasoning about the memory access of heap-manipulating programs. We develop a static analysis that automatically splits heap-allocated data structures into provably disjoint regions. Our algorithm focuses on dynamic data structures accessed in loops and is accompanied by automated source-to-source transformations which enable loop parallelisation and physical memory partitioning by off-the-shelf HLS tools. We then extend the scope of our technique to pointer-based memory-intensive implementations that require access to an off-chip memory. The extended HLS design aid generates parallel on-chip multi-cache architectures. It uses the disjointness property of memory accesses to support non-overlapping memory regions by private caches. It also identifies regions which are shared after parallelisation and which are supported by parallel caches with a coherency mechanism and synchronisation, resulting in automatically specialised memory systems. We show up to 15x acceleration from heap partitioning, parallelisation and the insertion of the custom cache system in demonstrably practical applications.Open Acces

Programming models to support data science workflows

Data Science workflows have become a must to progress in many scientific areas such as life, health, and earth sciences. In contrast to traditional HPC workflows, they are more heterogeneous; combining binary executions, MPI simulations, multi-threaded applications, custom analysis (possibly written in Java, Python, C/C++ or R), and real-time processing. Furthermore, in the past, field experts were capable of programming and running small simulations. However, nowadays, simulations requiring hundreds or thousands of cores are widely used and, to this point, efficiently programming them becomes a challenge even for computer sciences. Thus, programming languages and models make a considerable effort to ease the programmability while maintaining acceptable performance. This thesis contributes to the adaptation of High-Performance frameworks to support the needs and challenges of Data Science workflows by extending COMPSs, a mature, general-purpose, task-based, distributed programming model. First, we enhance our prototype to orchestrate different frameworks inside a single programming model so that non-expert users can build complex workflows where some steps require highly optimised state of the art frameworks. This extension includes the @binary, @OmpSs, @MPI, @COMPSs, and @MultiNode annotations for both Java and Python workflows. Second, we integrate container technologies to enable developers to easily port, distribute, and scale their applications to distributed computing platforms. This combination provides a straightforward methodology to parallelise applications from sequential codes along with efficient image management and application deployment that ease the packaging and distribution of applications. We distinguish between static, HPC, and dynamic container management and provide representative use cases for each scenario using Docker, Singularity, and Mesos. Third, we design, implement and integrate AutoParallel, a Python module to automatically find an appropriate task-based parallelisation of affine loop nests and execute them in parallel in a distributed computing infrastructure. It is based on sequential programming and requires one single annotation (the @parallel Python decorator) so that anyone with intermediate-level programming skills can scale up an application to hundreds of cores. Finally, we propose a way to extend task-based management systems to support continuous input and output data to enable the combination of task-based workflows and dataflows (Hybrid Workflows) using one single programming model. Hence, developers can build complex Data Science workflows with different approaches depending on the requirements without the effort of combining several frameworks at the same time. Also, to illustrate the capabilities of Hybrid Workflows, we have built a Distributed Stream Library that can be easily integrated with existing task-based frameworks to provide support for dataflows. The library provides a homogeneous, generic, and simple representation of object and file streams in both Java and Python; enabling complex workflows to handle any data type without dealing directly with the streaming back-end.Els fluxos de treball de Data Science s’han convertit en una necessitat per progressar en moltes àrees científiques com les ciències de la vida, la salut i la terra. A diferència dels fluxos de treball tradicionals per a la CAP, els fluxos de Data Science són més heterogenis; combinant l’execució de binaris, simulacions MPI, aplicacions multiprocés, anàlisi personalitzats (possiblement escrits en Java, Python, C / C ++ o R) i computacions en temps real. Mentre que en el passat els experts de cada camp eren capaços de programar i executar petites simulacions, avui dia, aquestes simulacions representen un repte fins i tot per als experts ja que requereixen centenars o milers de nuclis. Per aquesta raó, els llenguatges i models de programació actuals s’esforcen considerablement en incrementar la programabilitat mantenint un rendiment acceptable. Aquesta tesi contribueix a l’adaptació de models de programació per a la CAP per afrontar les necessitats i reptes dels fluxos de Data Science estenent COMPSs, un model de programació distribuïda madur, de propòsit general, i basat en tasques. En primer lloc, millorem el nostre prototip per orquestrar diferent programari per a que els usuaris no experts puguin crear fluxos complexos usant un únic model on alguns passos requereixin tecnologies altament optimitzades. Aquesta extensió inclou les anotacions de @binary, @OmpSs, @MPI, @COMPSs, i @MultiNode per a fluxos en Java i Python. En segon lloc, integrem tecnologies de contenidors per permetre als desenvolupadors portar, distribuir i escalar fàcilment les seves aplicacions en plataformes distribuïdes. A més d’una metodologia senzilla per a paral·lelitzar aplicacions a partir de codis seqüencials, aquesta combinació proporciona una gestió d’imatges i una implementació d’aplicacions eficients que faciliten l’empaquetat i la distribució d’aplicacions. Distingim entre la gestió de contenidors estàtica, CAP i dinàmica i proporcionem casos d’ús representatius per a cada escenari amb Docker, Singularity i Mesos. En tercer lloc, dissenyem, implementem i integrem AutoParallel, un mòdul de Python per determinar automàticament la paral·lelització basada en tasques de nius de bucles afins i executar-los en paral·lel en una infraestructura distribuïda. AutoParallel està basat en programació seqüencial, requereix una sola anotació (el decorador @parallel) i permet a un usuari intermig escalar una aplicació a centenars de nuclis. Finalment, proposem una forma d’estendre els sistemes basats en tasques per admetre dades d’entrada i sortida continus; permetent així la combinació de fluxos de treball i dades (Fluxos Híbrids) en un únic model. Conseqüentment, els desenvolupadors poden crear fluxos complexos seguint diferents patrons sense l’esforç de combinar diversos models al mateix temps. A més, per a il·lustrar les capacitats dels Fluxos Híbrids, hem creat una biblioteca (DistroStreamLib) que s’integra fàcilment amb els models basats en tasques per suportar fluxos de dades. La biblioteca proporciona una representació homogènia, genèrica i simple de seqüències contínues d’objectes i arxius en Java i Python; permetent gestionar qualsevol tipus de dades sense tractar directament amb el back-end de streaming.Los flujos de trabajo de Data Science se han convertido en una necesidad para progresar en muchas áreas científicas como las ciencias de la vida, la salud y la tierra. A diferencia de los flujos de trabajo tradicionales para la CAP, los flujos de Data Science son más heterogéneos; combinando la ejecución de binarios, simulaciones MPI, aplicaciones multiproceso, análisis personalizados (posiblemente escritos en Java, Python, C/C++ o R) y computaciones en tiempo real. Mientras que en el pasado los expertos de cada campo eran capaces de programar y ejecutar pequeñas simulaciones, hoy en día, estas simulaciones representan un desafío incluso para los expertos ya que requieren cientos o miles de núcleos. Por esta razón, los lenguajes y modelos de programación actuales se esfuerzan considerablemente en incrementar la programabilidad manteniendo un rendimiento aceptable. Esta tesis contribuye a la adaptación de modelos de programación para la CAP para afrontar las necesidades y desafíos de los flujos de Data Science extendiendo COMPSs, un modelo de programación distribuida maduro, de propósito general, y basado en tareas. En primer lugar, mejoramos nuestro prototipo para orquestar diferentes software para que los usuarios no expertos puedan crear flujos complejos usando un único modelo donde algunos pasos requieran tecnologías altamente optimizadas. Esta extensión incluye las anotaciones de @binary, @OmpSs, @MPI, @COMPSs, y @MultiNode para flujos en Java y Python. En segundo lugar, integramos tecnologías de contenedores para permitir a los desarrolladores portar, distribuir y escalar fácilmente sus aplicaciones en plataformas distribuidas. Además de una metodología sencilla para paralelizar aplicaciones a partir de códigos secuenciales, esta combinación proporciona una gestión de imágenes y una implementación de aplicaciones eficientes que facilitan el empaquetado y la distribución de aplicaciones. Distinguimos entre gestión de contenedores estática, CAP y dinámica y proporcionamos casos de uso representativos para cada escenario con Docker, Singularity y Mesos. En tercer lugar, diseñamos, implementamos e integramos AutoParallel, un módulo de Python para determinar automáticamente la paralelización basada en tareas de nidos de bucles afines y ejecutarlos en paralelo en una infraestructura distribuida. AutoParallel está basado en programación secuencial, requiere una sola anotación (el decorador @parallel) y permite a un usuario intermedio escalar una aplicación a cientos de núcleos. Finalmente, proponemos una forma de extender los sistemas basados en tareas para admitir datos de entrada y salida continuos; permitiendo así la combinación de flujos de trabajo y datos (Flujos Híbridos) en un único modelo. Consecuentemente, los desarrolladores pueden crear flujos complejos siguiendo diferentes patrones sin el esfuerzo de combinar varios modelos al mismo tiempo. Además, para ilustrar las capacidades de los Flujos Híbridos, hemos creado una biblioteca (DistroStreamLib) que se integra fácilmente a los modelos basados en tareas para soportar flujos de datos. La biblioteca proporciona una representación homogénea, genérica y simple de secuencias continuas de objetos y archivos en Java y Python; permitiendo manejar cualquier tipo de datos sin tratar directamente con el back-end de streaming.Postprint (published version

A metadata-enhanced framework for high performance visual effects

This thesis is devoted to reducing the interactive latency of image processing computations in visual effects. Film and television graphic artists depend upon low-latency feedback to receive a visual response to changes in effect parameters. We tackle latency with a domain-specific optimising compiler which leverages high-level program metadata to guide key computational and memory hierarchy optimisations. This metadata encodes static and dynamic information about data dependence and patterns of memory access in the algorithms constituting a visual effect – features that are typically difficult to extract through program analysis – and presents it to the compiler in an explicit form. By using domain-specific information as a substitute for program analysis, our compiler is able to target a set of complex source-level optimisations that a vendor compiler does not attempt, before passing the optimised source to the vendor compiler for lower-level optimisation. Three key metadata-supported optimisations are presented. The first is an adaptation of space and schedule optimisation – based upon well-known compositions of the loop fusion and array contraction transformations – to the dynamic working sets and schedules of a runtimeparameterised visual effect. This adaptation sidesteps the costly solution of runtime code generation by specialising static parameters in an offline process and exploiting dynamic metadata to adapt the schedule and contracted working sets at runtime to user-tunable parameters. The second optimisation comprises a set of transformations to generate SIMD ISA-augmented source code. Our approach differs from autovectorisation by using static metadata to identify parallelism, in place of data dependence analysis, and runtime metadata to tune the data layout to user-tunable parameters for optimal aligned memory access. The third optimisation comprises a related set of transformations to generate code for SIMT architectures, such as GPUs. Static dependence metadata is exploited to guide large-scale parallelisation for tens of thousands of in-flight threads. Optimal use of the alignment-sensitive, explicitly managed memory hierarchy is achieved by identifying inter-thread and intra-core data sharing opportunities in memory access metadata. A detailed performance analysis of these optimisations is presented for two industrially developed visual effects. In our evaluation we demonstrate up to 8.1x speed-ups on Intel and AMD multicore CPUs and up to 6.6x speed-ups on NVIDIA GPUs over our best hand-written implementations of these two effects. Programmability is enhanced by automating the generation of SIMD and SIMT implementations from a single programmer-managed scalar representation