Lateral control of an autonomous vehicle

The asymptotic stabilization problem for a class of nonlinear under-actuated systems is studied and solved. Its solution, together with the back-stepping and the forwarding control design methods, is exploited in the control of the nonlinear lateral dynamics of a vehicle. Even though the theoretical studies of the lateral control of autonomous vehicles are traditionally applied to lane keeping cases, the results can be applied to broader range of areas, such as lane changing cases. The comparison between the performances of the closed-loop systems with the given controller and a typical human driver is given and demonstrates the speediness and the effectiveness of the feedback controller

Integration of Active Systems for a Global Chassis Control Design

Vehicle chassis control active systems (braking, suspension, steering and driveline), from the first ABS/ESC control unit to the current advanced driver assistance systems (ADAS), are progressively revolutionizing the way of thinking and designing the vehicle, improving its interaction with the surrounding world (V2V and V2X) and have led to excellent results in terms of safety and performances (dynamic behavior and drivability). They are usually referred as intelligent vehicles due to a software/hardware architecture able to assist the driver for achieving specific safety margin and/or optimal vehicle dynamic behavior. Moreover, industrial and academic communities agree that these technologies will progress till the diffusion of the so called autonomous cars which are able to drive robustly in a wide range of traffic scenarios. Different autonomous vehicles are already available in Europe, Japan and United States and several solutions have been proposed for smart cities and/or small public area like university campus. In this context, the present research activity aims at improving safety, comfort and performances through the integration of global active chassis control: the purposes are to study, design and implement control strategies to support the driver for achieving one or more final target among safety, comfort and performance. Specifically, the vehicle subsystems that are involved in the present research for active systems development are the steering system, the propulsion system, the transmission and the braking system. The thesis is divided into three sections related to different applications of active systems that, starting from a robust theoretical design procedure, are strongly supported by objective experimental results obtained fromHardware In the Loop (HIL) test rigs and/or proving ground testing sessions. The first chapter is dedicated to one of the most discussed topic about autonomous driving due to its impact from the social point of view and in terms of human error mitigation when the driver is not prompt enough. In particular, it is here analyzed the automated steering control which is already implemented for automatic parking and that could represent also a key element for conventional passenger car in emergency situation where a braking intervention is not enough for avoiding an imminent collision. The activity is focused on different steering controllers design and their implementation for an autonomous vehicle; an obstacle collision avoidance adaptation is introduced for future implementations. Three different controllers, Proportional Derivative (PD), PD+Feedforward (FF) e PD+Integral Sliding Mode (ISM), are designed for tracking a reference trajectory that can be modified in real-time for obstacle avoidance purposes. Furthermore, PD+FF and PD+ISM logic are able to improve the tracking performances of automated steering during cornering maneuvers, relevant fromthe collision avoidance point of view. Path tracking control and its obstacle avoidance enhancement is also shown during experimental tests executed in a proving ground through its implementation for an autonomous vehicle demonstrator. Even if the activity is presented for an autonomous vehicle, the active control can be developed also for a conventional vehicle equipped with an Electronic Power Steering (EPS) or Steer-by-wire architectures. The second chapter describes a Torque Vectoring (TV) control strategy, applied to a Fully Electric Vehicle (FEV) with four independent electric motor (one for each wheel), that aims to optimize the lateral vehicle behavior by a proper electric motor torque regulation. A yaw rate controller is presented and designed in order to achieve a desired steady-state lateral behaviour of the car (handling task). Furthermore, a sideslip angle controller is also integrated to preserve vehicle stability during emergency situations (safety task). LQR, LQR+FF and ISM strategies are formulated and explained for yaw rate and concurrent yaw rate/sideslip angle control techniques also comparing their advantages and weakness points. The TV strategy is implemented and calibrated on a FEV demonstrator by executing experimental maneuvers (step steer, skid pad, lane change and sequence of step steers) thus proving the efficacy of the proposed controller and the safety contribution guaranteed by the sideslip control. The TV could be also applied for internal combustion engine driven vehicles by installing specific torque vectoring differentials, able to distribute the torque generated by the engine to each wheel independently. The TV strategy evaluated in the second chapter can be influenced by the presence of a transmission between themotor (or the engine) and wheels (where the torque control is supposed to be designed): in addition to the mechanical delay introduced by transmission components, the presence of gears backlashes can provoke undesired noises and vibrations in presence of torque sign inversion. The last chapter is thus related to a new method for noises and vibration attenuation for a Dual Clutch Transmission (DCT). This is achieved in a new way by integrating the powertrain control with the braking system control, which are historically and conventionally analyzed and designed separately. It is showed that a torsional preload effect can be obtained on transmission components by increasing the wheel torque and concurrently applying a braking wheel torque. For this reason, a pressure following controller is presented and validated through a Hardware In the Loop (HIL) test rig in order to track a reference value of braking torque thus ensuring the desired preload effect and noises reduction. Experimental results demonstrates the efficacy of the controller, also opening new scenario for global chassis control design. Finally, some general conclusions are drawn and possible future activities and recommendations are proposed for further investigations or improvements with respect to the results shown in the present work

Nonlinear Modeling and Control of Driving Interfaces and Continuum Robots for System Performance Gains

With the rise of (semi)autonomous vehicles and continuum robotics technology and applications, there has been an increasing interest in controller and haptic interface designs. The presence of nonlinearities in the vehicle dynamics is the main challenge in the selection of control algorithms for real-time regulation and tracking of (semi)autonomous vehicles. Moreover, control of continuum structures with infinite dimensions proves to be difficult due to their complex dynamics plus the soft and flexible nature of the manipulator body. The trajectory tracking and control of automobile and robotic systems requires control algorithms that can effectively deal with the nonlinearities of the system without the need for approximation, modeling uncertainties, and input disturbances. Control strategies based on a linearized model are often inadequate in meeting precise performance requirements. To cope with these challenges, one must consider nonlinear techniques. Nonlinear control systems provide tools and methodologies for enabling the design and realization of (semi)autonomous vehicle and continuum robots with extended specifications based on the operational mission profiles. This dissertation provides an insight into various nonlinear controllers developed for (semi)autonomous vehicles and continuum robots as a guideline for future applications in the automobile and soft robotics field. A comprehensive assessment of the approaches and control strategies, as well as insight into the future areas of research in this field, are presented.First, two vehicle haptic interfaces, including a robotic grip and a joystick, both of which are accompanied by nonlinear sliding mode control, have been developed and studied on a steer-by-wire platform integrated with a virtual reality driving environment. An operator-in-the-loop evaluation that included 30 human test subjects was used to investigate these haptic steering interfaces over a prescribed series of driving maneuvers through real time data logging and post-test questionnaires. A conventional steering wheel with a robust sliding mode controller was used for all the driving events for comparison. Test subjects operated these interfaces for a given track comprised of a double lane-change maneuver and a country road driving event. Subjective and objective results demonstrate that the driver’s experience can be enhanced up to 75.3% with a robotic steering input when compared to the traditional steering wheel during extreme maneuvers such as high-speed driving and sharp turn (e.g., hairpin turn) passing. Second, a cellphone-inspired portable human-machine-interface (HMI) that incorporated the directional control of the vehicle as well as the brake and throttle functionality into a single holistic device will be presented. A nonlinear adaptive control technique and an optimal control approach based on driver intent were also proposed to accompany the mechatronic system for combined longitudinal and lateral vehicle guidance. Assisting the disabled drivers by excluding extensive arm and leg movements ergonomically, the device has been tested in a driving simulator platform. Human test subjects evaluated the mechatronic system with various control configurations through obstacle avoidance and city road driving test, and a conventional set of steering wheel and pedals were also utilized for comparison. Subjective and objective results from the tests demonstrate that the mobile driving interface with the proposed control scheme can enhance the driver’s performance by up to 55.8% when compared to the traditional driving system during aggressive maneuvers. The system’s superior performance during certain vehicle maneuvers and approval received from the participants demonstrated its potential as an alternative driving adaptation for disabled drivers. Third, a novel strategy is designed for trajectory control of a multi-section continuum robot in three-dimensional space to achieve accurate orientation, curvature, and section length tracking. The formulation connects the continuum manipulator dynamic behavior to a virtual discrete-jointed robot whose degrees of freedom are directly mapped to those of a continuum robot section under the hypothesis of constant curvature. Based on this connection, a computed torque control architecture is developed for the virtual robot, for which inverse kinematics and dynamic equations are constructed and exploited, with appropriate transformations developed for implementation on the continuum robot. The control algorithm is validated in a realistic simulation and implemented on a six degree-of-freedom two-section OctArm continuum manipulator. Both simulation and experimental results show that the proposed method could manage simultaneous extension/contraction, bending, and torsion actions on multi-section continuum robots with decent tracking performance (e.g. steady state arc length and curvature tracking error of 3.3mm and 130mm-1, respectively). Last, semi-autonomous vehicles equipped with assistive control systems may experience degraded lateral behaviors when aggressive driver steering commands compete with high levels of autonomy. This challenge can be mitigated with effective operator intent recognition, which can configure automated systems in context-specific situations where the driver intends to perform a steering maneuver. In this article, an ensemble learning-based driver intent recognition strategy has been developed. A nonlinear model predictive control algorithm has been designed and implemented to generate haptic feedback for lateral vehicle guidance, assisting the drivers in accomplishing their intended action. To validate the framework, operator-in-the-loop testing with 30 human subjects was conducted on a steer-by-wire platform with a virtual reality driving environment. The roadway scenarios included lane change, obstacle avoidance, intersection turns, and highway exit. The automated system with learning-based driver intent recognition was compared to both the automated system with a finite state machine-based driver intent estimator and the automated system without any driver intent prediction for all driving events. Test results demonstrate that semi-autonomous vehicle performance can be enhanced by up to 74.1% with a learning-based intent predictor. The proposed holistic framework that integrates human intelligence, machine learning algorithms, and vehicle control can help solve the driver-system conflict problem leading to safer vehicle operations

Lateral control for autonomous vehicles: A comparative evaluation

The selection of an appropriate control strategy is essential for ensuring safe operation in autonomous driving. While numerous control strategies have been developed for specific driving scenarios, a comprehensive comparative assessment of their performance using the same tuning methodology is lacking in the literature. This paper addresses this gap by presenting a systematic evaluation of state-of-the-art model-free and model-based control strategies. The objective is to evaluate and contrast the performance of these controllers across a wide range of driving scenarios, reflecting the diverse needs of autonomous vehicles. To facilitate the comparative analysis, a comprehensive set of performance metrics is selected, encompassing accuracy, robustness, and comfort. The contributions of this research include the design of a systematic tuning methodology, the use of two novel metrics for stability and comfort comparisons and the evaluation through extensive simulations and real tests in an experimental instrumented vehicle over a wide range of trajectories.Comment: Video showcasing a real-world test of a model-free lateral controller in an automated vehicle: https://youtu.be/JtLfZzEdGC

Vehicle Stability Control Considering the Driver-in-the-Loop

A driver‐in‐the‐loop modeling framework is essential for a full analysis of vehicle stability systems. In theory, knowing the vehicle’s desired path (driver’s intention), the problem is reduced to a standard control system in which one can use different methods to produce a (sub) optimal solution. In practice, however, estimation of a driver’s desired path is a challenging – if not impossible – task. In this thesis, a new formulation of the problem that integrates the driver and the vehicle model is proposed to improve vehicle performance without using additional information from the future intention of the driver. The driver’s handling technique is modeled as a general function of the road preview information as well as the dynamic states of the vehicle. In order to cover a variety of driving styles, the time‐ varying cumulative driver's delay and model uncertainties are included in the formulation. Given that for practical implementations, the driver’s future road preview data is not accessible, this information is modeled as bounded uncertainties. Subsequently, a state feedback controller is designed to counteract the negative effects of a driver’s lag while makes the system robust to modeling and process uncertainties. The vehicle’s performance is improved by redesigning the controller to consider a parameter varying model of the driver‐vehicle system. An LPV controller robust to unknown time‐varying delay is designed and the disturbance attenuation of the closed loop system is estimated. An approach is constructed to identify the time‐varying parameters of the driver model using past driving information. The obtained gains are clustered into several modes and the transition probability of switching between different driving‐styles (modes) is calculated. Based on this analysis, the driver‐vehicle system is modeled as a Markovian jump dynamical system. Moreover, a complementary analysis is performed on the convergence properties of the mode‐dependent controller and a tighter estimation for the maximum level of disturbance rejection of the LPV controller is obtained. In addition, the effect of a driver’s skills in controlling the vehicle while the tires are saturated is analyzed. A guideline for analysis of the nonlinear system performance with consideration to the driver’s skills is suggested. Nonlinear controller design techniques are employed to attenuate the undesirable effects of both model uncertainties and tire saturation

Restricted structure non-linear generalized minimum variance control

This research presents the Restricted Structure Non-linear Generalized Minimum Variance (RS-NGMV) algorithm for Linear Parameter-Varying (LPV) systems. The LPV systems are defined as linear plant subsystems within the control diagram and may include Non-linear (NL) input subsystems. The RS-NGMV control solution for the latter will be slightly different than the first one and have the capability of dealing with NL characteristics such as saturation, discontinuities and black-box terms. The controller is built in a low-order Restricted Structure (RS) in the form of a general z-transfer function. This brings forward two major advantages. First, it offers a high-order advanced control solution inside low-order control structures which are known for their natural robustness. Secondly, it is easier to operate and re-tune for the classically trained staff in the industry as it can be given the structures they are rather familiar with such as the PID. Another advantage of the RS-NGMV is its model-based design that enables a faster adaptation to implement different systems. Features of the RS-NGMV are investigated throughout the thesis with case studies from trends in engineering like robotics, autonomous and electric vehicles. The results show that the RS-NGMV is highly capable of adapting to set-point changes, parameter variations with its ability to update the control gains rapidly by using optimizations. Some extensions of algorithms have also been studied following recent directions in optimal/predictive control resulting in a new preview control approach and Scheduled RS-NGMV control.This research presents the Restricted Structure Non-linear Generalized Minimum Variance (RS-NGMV) algorithm for Linear Parameter-Varying (LPV) systems. The LPV systems are defined as linear plant subsystems within the control diagram and may include Non-linear (NL) input subsystems. The RS-NGMV control solution for the latter will be slightly different than the first one and have the capability of dealing with NL characteristics such as saturation, discontinuities and black-box terms. The controller is built in a low-order Restricted Structure (RS) in the form of a general z-transfer function. This brings forward two major advantages. First, it offers a high-order advanced control solution inside low-order control structures which are known for their natural robustness. Secondly, it is easier to operate and re-tune for the classically trained staff in the industry as it can be given the structures they are rather familiar with such as the PID. Another advantage of the RS-NGMV is its model-based design that enables a faster adaptation to implement different systems. Features of the RS-NGMV are investigated throughout the thesis with case studies from trends in engineering like robotics, autonomous and electric vehicles. The results show that the RS-NGMV is highly capable of adapting to set-point changes, parameter variations with its ability to update the control gains rapidly by using optimizations. Some extensions of algorithms have also been studied following recent directions in optimal/predictive control resulting in a new preview control approach and Scheduled RS-NGMV control

SDRE preview control for a LPV modelled autonomous vehicle

This paper aims to present a Preview Controller by taking State-Dependent Riccati Equation (SDRE) approach to the standard Preview Control solution based on Linear Quadratic (LQ) framework. A Matlab/Simulink simulation study for performing a lane change task for a LPV modelled autonomous vehicle has been conducted. The control objective is to achievereference tracking under parameter variation. It is assumed that the system has access to the future reference information for Np preview steps. The results show that the SDRE Preview Controller demonstrates good transient behaviour and achieve reference tracking objective

Robust Adaptive Learning-based Path Tracking Control of Autonomous Vehicles under Uncertain Driving Environments

This paper investigates the path tracking control problem of autonomous vehicles subject to modelling uncertainties and external disturbances. The problem is approached by employing a 2-degree of freedom vehicle model, which is reformulated into a newly defined parametric form with the system uncertainties being lumped into an unknown parametric vector. On top of the parametric system representation, a novel robust adaptive learning control (RALC) approach is then developed, which estimates the system uncertainties through iterative learning while treating the external disturbances by adopting a robust term. It is shown that the proposed approach is able to improve the lateral tracking performance gradually through learning from previous control experiences, despite only partial knowledge of the vehicle dynamics being available. It is noteworthy that a novel technique targeting at the non-square input distribution matrix is employed so as to deal with the under-actuation property of the vehicle dynamics, which extends the adaptive learning control theory from square systems to non-square systems. Moreover, the convergence properties of the RALC algorithm are analysed under the framework of Lyapunov-like theory by virtue of the composite energy function and the λ-norm. The effectiveness of the proposed control scheme is verified by representative simulation examples and comparisons with existing methods