Load balancing using cell range expansion in LTE advanced heterogeneous networks

The use of heterogeneous networks is on the increase, fueled by consumer demand for more data. The main objective of heterogeneous networks is to increase capacity. They offer solutions for efficient use of spectrum, load balancing and improvement of cell edge coverage amongst others. However, these solutions have inherent challenges such as inter-cell interference and poor mobility management. In heterogeneous networks there is transmit power disparity between macro cell and pico cell tiers, which causes load imbalance between the tiers. Due to the conventional user-cell association strategy, whereby users associate to a base station with the strongest received signal strength, few users associate to small cells compared to macro cells. To counter the effects of transmit power disparity, cell range expansion is used instead of the conventional strategy. The focus of our work is on load balancing using cell range expansion (CRE) and network utility optimization techniques to ensure fair sharing of load in a macro and pico cell LTE Advanced heterogeneous network. The aim is to investigate how to use an adaptive cell range expansion bias to optimize Pico cell coverage for load balancing. Reviewed literature points out several approaches to solve the load balancing problem in heterogeneous networks, which include, cell range expansion and utility function optimization. Then, we use cell range expansion, and logarithmic utility functions to design a load balancing algorithm. In the algorithm, user and base station associations are optimized by adapting CRE bias to pico base station load status. A price update mechanism based on a suboptimal solution of a network utility optimization problem is used to adapt the CRE bias. The price is derived from the load status of each pico base station. The performance of the algorithm was evaluated by means of an LTE MATLAB toolbox. Simulations were conducted according to 3GPP and ITU guidelines for modelling heterogeneous networks and propagation environment respectively. Compared to a static CRE configuration, the algorithm achieved more fairness in load distribution. Further, it achieved a better trade-off between cell edge and cell centre user throughputs. [Please note: this thesis file has been deferred until December 2016

Resource allocation in mobile edge cloud computing for data-intensive applications

Rapid advancement in the mobile telecommunications industry has motivated the development of mobile applications in a wide range of social and scientific domains. However, mobile computing (MC) platforms still have several constraints, such as limited computation resources, short battery life and high sensitivity to network capabilities. In order to overcome the limitations of mobile computing and benefit from the huge advancement in mobile telecommunications and the rapid revolution of distributed resources, mobile-aware computing models, such as mobile cloud computing (MCC) and mobile edge computing (MEC) have been proposed. The main problem is to decide on an application execution plan while satisfying quality of service (QoS) requirements and the current status of system networking and device energy. However, the role of application data in offloading optimisation has not been studied thoroughly, particularly with respect to how data size and distribution impact application offloading. This problem can be referred to as data-intensive mobile application offloading optimisation. To address this problem, this thesis presents novel optimisation frameworks, techniques and algorithms for mobile application resource allocation in mobile-aware computing environments. These frameworks and techniques are proposed to provide optimised solutions to schedule data intensive mobile applications. Experimental results show the ability of the proposed tools in optimising the scheduling and the execution of data intensive applications on various computing environments to meet application QoS requirements. Furthermore, the results clearly stated the significant contribution of the data size parameter on scheduling the execution of mobile applications. In addition, the thesis provides an analytical investigation of mobile-aware computing environments for a certain mobile application type. The investigation provides performance analysis to help users decide on target computation resources based on application structure, input data, and mobile network status

Energy-Efficient Resource Allocation in Cloud and Fog Radio Access Networks

PhD ThesisWith the development of cloud computing, radio access networks (RAN) is migrating to fully or partially centralised architecture, such as Cloud RAN (C- RAN) or Fog RAN (F-RAN). The novel architectures are able to support new applications with the higher throughput, the higher energy e ciency and the better spectral e ciency performance. However, the more complex energy consumption features brought by these new architectures are challenging. In addition, the usage of Energy Harvesting (EH) technology and the computation o oading in novel architectures requires novel resource allocation designs.This thesis focuses on the energy e cient resource allocation for Cloud and Fog RAN networks. Firstly, a joint user association (UA) and power allocation scheme is proposed for the Heterogeneous Cloud Radio Access Networks with hybrid energy sources where Energy Harvesting technology is utilised. The optimisation problem is designed to maximise the utilisation of the renewable energy source. Through solving the proposed optimisation problem, the user association and power allocation policies are derived together to minimise the grid power consumption. Compared to the conventional UAs adopted in RANs, green power harvested by renewable energy source can be better utilised so that the grid power consumption can be greatly reduced with the proposed scheme. Secondly, a delay-aware energy e cient computation o oading scheme is proposed for the EH enabled F-RANs, where for access points (F-APs) are supported by renewable energy sources. The uneven distribution of the harvested energy brings in dynamics of the o oading design and a ects the delay experienced by users. The grid power minimisation problem is formulated. Based on the solutions derived, an energy e cient o oading decision algorithm is designed. Compared to SINR-based o oading scheme, the total grid power consumption of all F-APs can be reduced signi cantly with the proposed o oading decision algorithm while meeting the latency constraint. Thirdly, an energy-e cient computation o oading for mobile applications with shared data is investigated in a multi-user fog computing network. Taking the advantage of shared data property of latency-critical applications such as virtual reality (VR) and augmented reality (AR) into consideration, the energy minimisation problem is formulated. Then the optimal computation o oading and communications resources allocation policy is proposed which is able to minimise the overall energy consumption of mobile users and cloudlet server. Performance analysis indicates that the proposed policy outperforms other o oading schemes in terms of energy e ciency. The research works conducted in this thesis and the thorough performance analysis have revealed some insights on energy e cient resource allocation design in Cloud and Fog RANs

Control-data separation architecture for cellular radio access networks: a survey and outlook

Conventional cellular systems are designed to ensure ubiquitous coverage with an always present wireless channel irrespective of the spatial and temporal demand of service. This approach raises several problems due to the tight coupling between network and data access points, as well as the paradigm shift towards data-oriented services, heterogeneous deployments and network densification. A logical separation between control and data planes is seen as a promising solution that could overcome these issues, by providing data services under the umbrella of a coverage layer. This article presents a holistic survey of existing literature on the control-data separation architecture (CDSA) for cellular radio access networks. As a starting point, we discuss the fundamentals, concepts, and general structure of the CDSA. Then, we point out limitations of the conventional architecture in futuristic deployment scenarios. In addition, we present and critically discuss the work that has been done to investigate potential benefits of the CDSA, as well as its technical challenges and enabling technologies. Finally, an overview of standardisation proposals related to this research vision is provided

Self Organising Network Techniques to Maximise Traffic Offload onto a 3G/WCDMA Small Cell Network using MDT UE Measurement Reports

This paper presents a number of Self-Organising Network (SON) based methods using a 3GPP Minimisation of Drive Testing (MDT) approach or similar and the analysis of these geo-located UE measurements to maximise traffic offload onto lamppost mounted 3G/WCDMA microcells. Simulations have been performed for a real 3G/WCDMA microcell deployment in a busy area of central London and the results suggest that for the network studied a traffic increase on the microcell layer of up to 175% is achievable through the novel SON methods presented

Handover Control Parameters Optimisation in LTE Networks

In the past few years, the demand for data traffic has increased explosively, in order to meet such a demand in traffic volume, small cell networks have been introduced. With the wide adoption of small cells, the densification of small cell deployment has become an unavoidable trend. However, such density in small cell deployment brings various problems for the network operators, among which the handover issue is one of the most critical. In order to tackle the handover problem in heterogeneous networks (HetNets), this thesis was mainly concerned with the system-level handover control parameters optimisation

Cognitive networking for next generation of cellular communication systems

This thesis presents a comprehensive study of cognitive networking for cellular networks with contributions that enable them to be more dynamic, agile, and efficient. To achieve this, machine learning (ML) algorithms, a subset of artificial intelligence, are employed to bring such cognition to cellular networks. More specifically, three major branches of ML, namely supervised, unsupervised, and reinforcement learning (RL), are utilised for various purposes: unsupervised learning is used for data clustering, while supervised learning is employed for predictions on future behaviours of networks/users. RL, on the other hand, is utilised for optimisation purposes due to its inherent characteristics of adaptability and requiring minimal knowledge of the environment. Energy optimisation, capacity enhancement, and spectrum access are identified as primary design challenges for cellular networks given that they are envisioned to play crucial roles for 5G and beyond due to the increased demand in the number of connected devices as well as data rates. Each design challenge and its corresponding proposed solution are discussed thoroughly in separate chapters. Regarding energy optimisation, a user-side energy consumption is investigated by considering Internet of things (IoT) networks. An RL based intelligent model, which jointly optimises the wireless connection type and data processing entity, is proposed. In particular, a Q-learning algorithm is developed, through which the energy consumption of an IoT device is minimised while keeping the requirement of the applications--in terms of response time and security--satisfied. The proposed methodology manages to result in 0% normalised joint cost--where all the considered metrics are combined--while the benchmarks performed 54.84% on average. Next, the energy consumption of radio access networks (RANs) is targeted, and a traffic-aware cell switching algorithm is designed to reduce the energy consumption of a RAN without compromising on the user quality-of-service (QoS). The proposed technique employs a SARSA algorithm with value function approximation, since the conventional RL methods struggle with solving problems with huge state spaces. The results reveal that up to 52% gain on the total energy consumption is achieved with the proposed technique, and the gain is observed to reduce when the scenario becomes more realistic. On the other hand, capacity enhancement is studied from two different perspectives, namely mobility management and unmanned aerial vehicle (UAV) assistance. Towards that end, a predictive handover (HO) mechanism is designed for mobility management in cellular networks by identifying two major issues of Markov chains based HO predictions. First, revisits--which are defined as a situation whereby a user visits the same cell more than once within the same day--are diagnosed as causing similar transition probabilities, which in turn increases the likelihood of making incorrect predictions. This problem is addressed with a structural change; i.e., rather than storing 2-D transition matrix, it is proposed to store 3-D one that also includes HO orders. The obtained results show that 3-D transition matrix is capable of reducing the HO signalling cost by up to 25.37%, which is observed to drop with increasing randomness level in the data set. Second, making a HO prediction with insufficient criteria is identified as another issue with the conventional Markov chains based predictors. Thus, a prediction confidence level is derived, such that there should be a lower bound to perform HO predictions, which are not always advantageous owing to the HO signalling cost incurred from incorrect predictions. The outcomes of the simulations confirm that the derived confidence level mechanism helps in improving the prediction accuracy by up to 8.23%. Furthermore, still considering capacity enhancement, a UAV assisted cellular networking is considered, and an unsupervised learning-based UAV positioning algorithm is presented. A comprehensive analysis is conducted on the impacts of the overlapping footprints of multiple UAVs, which are controlled by their altitudes. The developed k-means clustering based UAV positioning approach is shown to reduce the number of users in outage by up to 80.47% when compared to the benchmark symmetric deployment. Lastly, a QoS-aware dynamic spectrum access approach is developed in order to tackle challenges related to spectrum access, wherein all the aforementioned types of ML methods are employed. More specifically, by leveraging future traffic load predictions of radio access technologies (RATs) and Q-learning algorithm, a novel proactive spectrum sensing technique is introduced. As such, two different sensing strategies are developed; the first one focuses solely on sensing latency reduction, while the second one jointly optimises sensing latency and user requirements. In particular, the proposed Q-learning algorithm takes the future load predictions of the RATs and the requirements of secondary users--in terms of mobility and bandwidth--as inputs and directs the users to the spectrum of the optimum RAT to perform sensing. The strategy to be employed can be selected based on the needs of the applications, such that if the latency is the only concern, the first strategy should be selected due to the fact that the second strategy is computationally more demanding. However, by employing the second strategy, sensing latency is reduced while satisfying other user requirements. The simulation results demonstrate that, compared to random sensing, the first strategy decays the sensing latency by 85.25%, while the second strategy enhances the full-satisfaction rate, where both mobility and bandwidth requirements of the user are simultaneously satisfied, by 95.7%. Therefore, as it can be observed, three key design challenges of the next generation of cellular networks are identified and addressed via the concept of cognitive networking, providing a utilitarian tool for mobile network operators to plug into their systems. The proposed solutions can be generalised to various network scenarios owing to the sophisticated ML implementations, which renders the solutions both practical and sustainable