Cost-effective robot for steep slope crops monitoring

This project aims to develop a low cost, simple and robust robot able to autonomously monitorcrops using simple sensors. It will be required do develop robotic sub-systems and integrate them with pre-selected mechanical components, electrical interfaces and robot systems (localization, navigation and perception) using ROS, for wine making regions and maize fields

A non-holonomic, highly human-in-the-loop compatible, assistive mobile robotic platform guidance navigation and control strategy

The provision of assistive mobile robotics for empowering and providing independence to the infirm, disabled and elderly in society has been the subject of much research. The issue of providing navigation and control assistance to users, enabling them to drive their powered wheelchairs effectively, can be complex and wide-ranging; some users fatigue quickly and can find that they are unable to operate the controls safely, others may have brain injury re-sulting in periodic hand tremors, quadriplegics may use a straw-like switch in their mouth to provide a digital control signal. Advances in autonomous robotics have led to the development of smart wheelchair systems which have attempted to address these issues; however the autonomous approach has, ac-cording to research, not been successful; users reporting that they want to be active drivers and not passengers. Recent methodologies have been to use collaborative or shared control which aims to predict or anticipate the need for the system to take over control when some pre-decided threshold has been met, yet these approaches still take away control from the us-er. This removal of human supervision and control by an autonomous system makes the re-sponsibility for accidents seriously problematic. This thesis introduces a new human-in-the-loop control structure with real-time assistive lev-els. One of these levels offers improved dynamic modelling and three of these levels offer unique and novel real-time solutions for: collision avoidance, localisation and waypoint iden-tification, and assistive trajectory generation. This architecture and these assistive functions always allow the user to remain fully in control of any motion of the powered wheelchair, shown in a series of experiments

Proceedings of the 9th Conference on Autonomous Robot Systems and Competitions

Welcome to ROBOTICA 2009. This is the 9th edition of the conference on Autonomous Robot Systems and Competitions, the third time with IEEE‐Robotics and Automation Society Technical Co‐Sponsorship. Previous editions were held since 2001 in Guimarães, Aveiro, Porto, Lisboa, Coimbra and Algarve. ROBOTICA 2009 is held on the 7th May, 2009, in Castelo Branco , Portugal. ROBOTICA has received 32 paper submissions, from 10 countries, in South America, Asia and Europe. To evaluate each submission, three reviews by paper were performed by the international program committee. 23 papers were published in the proceedings and presented at the conference. Of these, 14 papers were selected for oral presentation and 9 papers were selected for poster presentation. The global acceptance ratio was 72%. After the conference, eighth papers will be published in the Portuguese journal Robótica, and the best student paper will be published in IEEE Multidisciplinary Engineering Education Magazine. Three prizes will be awarded in the conference for: the best conference paper, the best student paper and the best presentation. The last two, sponsored by the IEEE Education Society ‐ Student Activities Committee. We would like to express our thanks to all participants. First of all to the authors, whose quality work is the essence of this conference. Next, to all the members of the international program committee and reviewers, who helped us with their expertise and valuable time. We would also like to deeply thank the invited speaker, Jean Paul Laumond, LAAS‐CNRS France, for their excellent contribution in the field of humanoid robots. Finally, a word of appreciation for the hard work of the secretariat and volunteers. Our deep gratitude goes to the Scientific Organisations that kindly agreed to sponsor the Conference, and made it come true. We look forward to seeing more results of R&D work on Robotics at ROBOTICA 2010, somewhere in Portugal

An intelligent multi-floor mobile robot transportation system in life science laboratories

In this dissertation, a new intelligent multi-floor transportation system based on mobile robot is presented to connect the distributed laboratories in multi-floor environment. In the system, new indoor mapping and localization are presented, hybrid path planning is proposed, and an automated doors management system is presented. In addition, a hybrid strategy with innovative floor estimation to handle the elevator operations is implemented. Finally the presented system controls the working processes of the related sub-system. The experiments prove the efficiency of the presented system

Navigation of Automatic Vehicle using AI Techniques

In the field of mobile robot navigation have been studied as important task for the new generation of mobile robot i.e. Corobot. For this mobile robot navigation has been viewed for unknown environment. We consider the 4-wheeled vehicle (Corobot) for Path Planning, an autonomous robot and an obstacle and collision avoidance to be used in sensor based robot. We propose that the predefined distance from the robot to target and make the robot follow the target at this distance and improve the trajectory tracking characteristics. The robot will then navigate among these obstacles without hitting them and reach the specified goal point. For these goal achieving we use different techniques radial basis function and back-propagation algorithm under the study of neural network. In this Corobot a robotic arm are assembled and the kinematic analyses of Corobot arm and help of Phidget Control Panel a wheeled to be moved in both forward and reverse direction by 2-motor controller have to be done. Under kinematic analysis propose the relationships between the positions and orientation of the links of a manipulator. In these studies an artificial techniques and their control strategy are shown with potential applications in the fields of industry, security, defense, investigation, and others. Here finally, the simulation result using the webot neural network has been done and this result is compared with experimental data for different training pattern

Using a mobile robot for hazardous substances detection in a factory environment

Dupla diplomação com a UTFPR - Universidade Tecnológica Federal do ParanáIndustries that work with toxic materials need extensive security protocols to avoid accidents. Instead of having fixed sensors, the concept of assembling the sensors on a mobile robot that performs the scanning through a defined path is cheaper, configurable and adaptable. This work describes a mobile robot, equipped with several gas sensors and LIDAR, that follows a trajectory based on waypoints, simulating a working Autonomous Guided Vehicle (AGV). At the same time, the robot keeps measuring for toxic gases. In other words, the robot follows the trajectory while the gas concentration is under a defined value. Otherwise, it starts the autonomous leakage search based on a search algorithm that allows to find the leakage position avoiding obstacles in real time. The proposed methodology is verified in simulation based on a model of the real robot. Therefore, three path plannings were developed and their performance compared. A Light Detection And Ranging (LIDAR) device was integrated with the path planning to propose an obstacle avoidance system with a dilation technique to enlarge the obstacles, thus, considering the robot’s dimensions. Moreover, if needed, the robot can be remotely operated with visual feedback. In addition, a controller was made for the robot. Gas sensors were embedded in the robot with Finite Impulse Response (FIR) filter to process the data. A low cost AGV was developed to compete in Festival Nacional de Robótica (Portuguese Robotics Open) 2019 - Gondomar, describing the robot’s control and software solution to the competition.As indústrias que trabalham com materiais tóxicos necessitam de extensos protocolos de segurança para evitar acidentes. Ao invés de ter sensores estáticos, o conceito de instalar sensores em um robô móvel que inspeciona através de um caminho definido é mais barato, configurável e adaptável. O presente trabalho descreve um robô móvel, equipado com vários sensores de gás e LIDAR, que percorre uma trajetória baseada em pontos de controle, simulando um AGV em trabalho. Em simultâneo são efetuadas medidas de gases tóxicos. Em outras palavras, o robô segue uma trajetória enquanto a concentração de gás está abaixo de um valor definido. Caso contrário, inicia uma busca autônoma de vazamento de gás com um algoritmo de busca que permite achar a posição do gás evitando os obstáculos em tempo real. A metodologia proposta é verificada em simulação. Três algoritmos de planejamento de caminho foram desenvolvidos e suas performances comparadas. Um LIDAR foi integrado com o planejamento de caminho para propôr um sistema de evitar obstáculos. Além disso, o robô pode ser operado remotamente com auxílio visual. Foi feito um controlador para o robô. Sensores de gás foram embarcados no robô com um filtro de resposta ao impulso finita para processar as informações. Um veículo guiado automático de baixo custo foi desenvolvido para competir no Festival Nacional de Robótica 2019 - Gondomar. O controle do veículo foi descrito com o programa de solução para a competição

Autonomous navigation and mapping of mobile robots based on 2D/3D cameras combination

Aufgrund der tendenziell zunehmenden Nachfrage an Systemen zur Unterstützung des alltäglichen Lebens gibt es derzeit ein großes Interesse an autonomen Systemen. Autonome Systeme werden in Häusern, Büros, Museen sowie in Fabriken eingesetzt. Sie können verschiedene Aufgaben erledigen, beispielsweise beim Reinigen, als Helfer im Haushalt, im Bereich der Sicherheit und Bildung, im Supermarkt sowie im Empfang als Auskunft, weil sie dazu verwendet werden können, die Verarbeitungszeit zu kontrollieren und präzise, zuverlässige Ergebnisse zu liefern. Ein Forschungsgebiet autonomer Systeme ist die Navigation und Kartenerstellung. Das heißt, mobile Roboter sollen selbständig ihre Aufgaben erledigen und zugleich eine Karte der Umgebung erstellen, um navigieren zu können. Das Hauptproblem besteht darin, dass der mobile Roboter in einer unbekannten Umgebung, in der keine zusätzlichen Bezugsinformationen vorhanden sind, das Gelände erkunden und eine dreidimensionale Karte davon erstellen muss. Der Roboter muss seine Positionen innerhalb der Karte bestimmen. Es ist notwendig, ein unterscheidbares Objekt zu finden. Daher spielen die ausgewählten Sensoren und der Register-Algorithmus eine relevante Rolle. Die Sensoren, die sowohl Tiefen- als auch Bilddaten liefern können, sind noch unzureichend. Der neue 3D-Sensor, nämlich der "Photonic Mixer Device" (PMD), erzeugt mit hoher Bildwiederholfrequenz eine Echtzeitvolumenerfassung des umliegenden Szenarios und liefert Tiefen- und Graustufendaten. Allerdings erfordert die höhere Qualität der dreidimensionalen Erkundung der Umgebung Details und Strukturen der Oberflächen, die man nur mit einer hochauflösenden CCD-Kamera erhalten kann. Die vorliegende Arbeit präsentiert somit eine Exploration eines mobilen Roboters mit Hilfe der Kombination einer CCD- und PMD-Kamera, um eine dreidimensionale Karte der Umgebung zu erstellen. Außerdem wird ein Hochleistungsalgorithmus zur Erstellung von 3D Karten und zur Poseschätzung in Echtzeit unter Verwendung des "Simultaneous Localization and Mapping" (SLAM) Verfahrens präsentiert. Der autonom arbeitende, mobile Roboter soll ferner Aufgaben übernehmen, wie z.B. die Erkennung von Objekten in ihrer Umgebung, um verschiedene praktische Aufgaben zu lösen. Die visuellen Daten der CCD-Kamera liefern nicht nur eine hohe Auflösung der Textur-Daten für die Tiefendaten, sondern werden auch für die Objekterkennung verwendet. Der "Iterative Closest Point" (ICP) Algorithmus benutzt zwei Punktwolken, um den Bewegungsvektor zu bestimmen. Schließlich sind die Auswertung der Korrespondenzen und die Rekonstruktion der Karte, um die reale Umgebung abzubilden, in dieser Arbeit enthalten.Presently, intelligent autonomous systems have to perform very interesting tasks due to trendy increases in support demands of human living. Autonomous systems have been used in various applications like houses, offices, museums as well as in factories. They are able to operate in several kinds of applications such as cleaning, household assistance, transportation, security, education and shop assistance because they can be used to control the processing time, and to provide precise and reliable output. One research field of autonomous systems is mobile robot navigation and map generation. That means the mobile robot should work autonomously while generating a map, which the robot follows. The main issue is that the mobile robot has to explore an unknown environment and to generate a three dimensional map of an unknown environment in case that there is not any further reference information. The mobile robot has to estimate its position and pose. It is required to find distinguishable objects. Therefore, the selected sensors and registered algorithms are significant. The sensors, which can provide both, depth as well as image data are still deficient. A new 3D sensor, namely the Photonic Mixer Device (PMD), generates a high rate output in real-time capturing the surrounding scenario as well as the depth and gray scale data. However, a higher quality of three dimension explorations requires details and textures of surfaces, which can be obtained from a high resolution CCD camera. This work hence presents the mobile robot exploration using the integration of CCD and PMD camera in order to create a three dimensional map. In addition, a high performance algorithm for 3D mapping and pose estimation of the locomotion in real time, using the "Simultaneous Localization and Mapping" (SLAM) technique is proposed. The flawlessly mobile robot should also handle the tasks, such as the recognition of objects in its environment, in order to achieve various practical missions. Visual input from the CCD camera not only delivers high resolution texture data on depth volume, but is also used for object recognition. The “Iterative Closest Point” (ICP) algorithm is using two sets of points to find out the translation and rotation vector between two scans. Finally, the evaluation of the correspondences and the reconstruction of the map to resemble the real environment are included in this thesis