The Problem of Adhesion Methods and Locomotion Mechanism Development for Wall-Climbing Robots

This review considers a problem in the development of mobile robot adhesion methods with vertical surfaces and the appropriate locomotion mechanism design. The evolution of adhesion methods for wall-climbing robots (based on friction, magnetic forces, air pressure, electrostatic adhesion, molecular forces, rheological properties of fluids and their combinations) and their locomotion principles (wheeled, tracked, walking, sliding framed and hybrid) is studied. Wall-climbing robots are classified according to the applications, adhesion methods and locomotion mechanisms. The advantages and disadvantages of various adhesion methods and locomotion mechanisms are analyzed in terms of mobility, noiselessness, autonomy and energy efficiency. Focus is placed on the physical and technical aspects of the adhesion methods and the possibility of combining adhesion and locomotion methods

Design and development of a pole climbing surveillance robot

The cost of installing, monitoring and servicing a fixed camera system can be high and not all areas are in need of constant surveying. The increase in crime in urban areas emphasizes the need for a more effective and efficient surveillance system, as a result could lead to fewer crimes. A temporary surveillance unit which is able to climb to gain an elevated view has great potential for both military and civilian application. This paper highlights how the patent pending climbing robotic system (PC-101) was developed to be used by London’s Metropolitan Police Forensic Department for analysing outdoor crime scenes especially that related to car accidents. When cars are involved in accidents in the Metropolitan area, depending on the scale of the incident, the road generally has to be shut off to traffic if there are serious casualties. Elevated images are required for cases which may be taken to court, which then the images are then used as evidence, therefore regulations on the quality and perspectives of the image have to be met. By climbing a range of existing street furniture such as street lamp post, a temporary platform eliminates the use of larger special vehicle which struggles to get to the crime scene as well as cuts down the duration of the road closure. 98% of London street lamps in the Metropolitan area are constructed out of steel structures which make the use of magnetic wheels for locomotion an ideal solution to the climbing problem. Once remote controlled to the top of the lamp post, the PC-101 makes use of its actuated camera arm/gimbal to take the required shot, which can be seen on the ground control unit. A surveillance tool of this sort can be used for many applications which include crowd/riot control, crime scene investigations, monitoring hostile environments and even the monitoring of nature within urban environment

Climbing and Walking Robots

With the advancement of technology, new exciting approaches enable us to render mobile robotic systems more versatile, robust and cost-efficient. Some researchers combine climbing and walking techniques with a modular approach, a reconfigurable approach, or a swarm approach to realize novel prototypes as flexible mobile robotic platforms featuring all necessary locomotion capabilities. The purpose of this book is to provide an overview of the latest wide-range achievements in climbing and walking robotic technology to researchers, scientists, and engineers throughout the world. Different aspects including control simulation, locomotion realization, methodology, and system integration are presented from the scientific and from the technical point of view. This book consists of two main parts, one dealing with walking robots, the second with climbing robots. The content is also grouped by theoretical research and applicative realization. Every chapter offers a considerable amount of interesting and useful information

New Technologies for Climbing Robots Adhesion to Surfaces

The interest in the development of climbing robots is growing steadily. The main motivations are to increase the operation e ciency, by eliminating the costly assembly of sca olding, or to protect human health and safety in hazardous tasks. Climbing robots have already been developed for applications ranging from cleaning to inspection of constructions di cult to reach. These robots should be capable of travelling over di erent types of surfaces, with di erent inclinations, such as oors, walls, ceilings, and to walk between such surfaces. Furthermore, they should be able of adapting and recon guring for di erent environment conditions and to be self-contained. Regarding the adhesion to the surface, the robots should be able to produce a secure gripping force using a light-weight mechanism. This paper presents a survey of di erent technologies proposed and adopted for climbing robots adhesion to surfaces, focusing on the new technologies that are recently being developed to ful ll these objectives.N/

Doctor of Philosophy

dissertationThis dissertation defines a new class of climbing robots, steering-plane bipeds, which encompasses a large number of existing climbing robots. Three major levels of motion planning are characterized which are common to this class of robots, namely, path planning, step planning, and gait planning. The unified presentation of related motion planning techniques is more generally applicable and more thorough than related algorithms in other literature, while more explicitly identifying limitations and tradeoffs due to alternate design choices within the class of steering-plane bipeds. A novel spline-based method for generating gaits is presented which uses separate path and time rate controls, and explicitly defined foot approach and departure directions that allows 1) a nominal guarantee of collision-free foot trajectories when close to the desired step configuration, 2) independent control of gait shape and speed, and 3) a unified representation of the four gait families of steering-plane bipeds: flipping, inchworm, step-through, and spinning gaits. This dissertation presents a thorough examination of the variations within each gait family, rather than merely presenting a representative instance of each. Concrete case studies applying the techniques of this dissertation are presented for optimizing the gaits for overall speed, energy efficiency, and minimum gripping force and moment. The results highlight that many common gaits in the literature are far from optimal. Results and general rules of thumb for gait planning are extracted that allow guidance for obtaining good results even if using alternate planning techniques without optimization

Design and development of a pole climbing surveillance robot

The cost of installing, monitoring and servicing a fixed camera system can be high and not all areas are in need of constant surveying. The increase in crime in urban areas emphasizes the need for a more effective and efficient surveillance system, as a result could lead to fewer crimes. A temporary surveillance unit which is able to climb to gain an elevated view has great potential for both military and civilian application. This paper highlights how the patent pending climbing robotic system (PC-101) was developed to be used by London’s Metropolitan Police Forensic Department for analysing outdoor crime scenes especially that related to car accidents. When cars are involved in accidents in the Metropolitan area, depending on the scale of the incident, the road generally has to be shut off to traffic if there are serious casualties. Elevated images are required for cases which may be taken to court, which then the images are then used as evidence, therefore regulations on the quality and perspectives of the image have to be met. By climbing a range of existing street furniture such as street lamp post, a temporary platform eliminates the use of larger special vehicle which struggles to get to the crime scene as well as cuts down the duration of the road closure. 98% of London street lamps in the Metropolitan area are constructed out of steel structures which make the use of magnetic wheels for locomotion an ideal solution to the climbing problem. Once remote controlled to the top of the lamp post, the PC-101 makes use of its actuated camera arm/gimbal to take the required shot, which can be seen on the ground control unit. A surveillance tool of this sort can be used for many applications which include crowd/riot control, crime scene investigations, monitoring hostile environments and even the monitoring of nature within urban environments

Design of a glass climbing robot

Wall-climbing robot is very useful in substituting human labors in dangerous and repetitive tasks like cleaning glass window in high building, maintenance, and inspection in industrial storage tank. A success in developing a climbing robot presents a huge economic benefit. This project aims to design a remote-controlled climbing robot that is able to operate on a vertical glass window. An effective adhesion mechanism using suction cups and solenoid valves had been designed. The locomotion mechanisms design based on a crossed-bar mechanism, utilizing pinion and rack. Detail drawings of the design and the robot specification had been finalized. A prototype was fabricated to demonstrate the design concept and its functionality. Control system of the robot, which includes an electrical circuit integrated with a C program, had been developed. Finally the functionality of the fabricated prototype was tested

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study

The walking robot project

A walking robot was designed, analyzed, and tested as an intelligent, mobile, and a terrain adaptive system. The robot's design was an application of existing technologies. The design of the six legs modified and combines well understood mechanisms and was optimized for performance, flexibility, and simplicity. The body design incorporated two tripods for walking stability and ease of turning. The electrical hardware design used modularity and distributed processing to drive the motors. The software design used feedback to coordinate the system and simple keystrokes to give commands. The walking machine can be easily adapted to hostile environments such as high radiation zones and alien terrain. The primary goal of the leg design was to create a leg capable of supporting a robot's body and electrical hardware while walking or performing desired tasks, namely those required for planetary exploration. The leg designers intent was to study the maximum amount of flexibility and maneuverability achievable by the simplest and lightest leg design. The main constraints for the leg design were leg kinematics, ease of assembly, degrees of freedom, number of motors, overall size, and weight