Variation-Tolerant and Voltage-Scalable Integrated Circuits Design

Ultra-low-voltage (ULV) operation where the supply voltage of the digital computing hardware is scaled down to the level near or below transistor threshold voltage (e.g. 300-500mV) is a key technique to achieve high computing energy efficiency. It has enabled many new exciting applications in the field of Internet of Things (IoT) devices and energy-constrained applications such as medical implants, environment sensors, and micro-robots. Ultra-low-voltage (ULV) operation is also commonly used with the emerging architectures that are often non Von-Neumann style to empower energy-efficient cognitive computing. One the biggest challenge in realizing ULV design is the large circuit delay variability. To guarantee functionality in the worst-case process, voltage, and temperature (PVT) condition, the traditional safety margin approach requires operating at a slower clock frequency or higher supply voltage which significantly limits the achievable energy efficiency of the hardware. To fully claim the energy efficiency of ULV, the large circuit delay variation needs to be adaptively handled. However, the existing adaptive techniques that are optimized for nominal supply voltage operation and traditional Von-Neumann architectures become inefficient for ULV designs and emerging architectures. This thesis presents adaptive techniques based on timing error detection and correction (EDAC) that are more suitable for the energy-constrained ULV designs and the emerging architectures. The proposed techniques are demonstrated in three test chips: (1) R-Processor: A 0.4V resilient processor with a voltage-scalable and low-overhead in-situ EDAC technique. It achieves 38% energy efficiency improvement or 2.3X throughput improvement as compared to the traditional safety margin approach. (2) A 450mV timing-margin-free waveform sorter for brain computer interface (BCI) microsystem. It achieves 49.3% higher energy efficiency and 35.6% higher throughput than the traditional safety margin approach. (3) Ultra-low-power and robust power-management system which consists of a microprocessor employing ULV EDAC, 63-ratio integrated switched-capacitor DC-DC converter, and a fully-digital error based regulation controller. In this thesis, we also explore circuits for emerging techniques. The first is temperature sensors for dynamic-thermal-management (DTM). The modern high-performance microprocessors suffer from ever-increasing power densities which has led to reliability concerns and increased cooling costs from excessive heat. In order to monitor and manage the thermal behavior, DTM techniques embed multiple temperature sensors and use its information. The size, accuracy, and voltage-scalability of the sensor are critical for the performance of DTM. Therefore, we propose a temperature sensor that directly senses transistor threshold voltage and the test chip demonstrates 9X smaller area, 3X higher accuracy, and 200mV lower voltage scalability (down to 400mV) than the previous state-of-art. Another area of exploration is interconnect design for ultra-dynamic-voltage-scaling (UDVS) systems. UDVS has been proposed for applications that require both high performance and high energy efficiency. UDVS can provide peak performance with nominal supply voltage when work load is high. When work load is moderate or low, UDVS systems can switch to ULV operation for higher energy efficiency. One of the critical challenges for developing UDVS systems is the inflexibility in various circuit fabrics that are often optimized for a single supply voltage. One critical example is conventional repeater based long interconnects which suffers from non-optimal performance and energy efficiency in UDVS systems. Therefore, in this thesis, we propose a reconfigurable interconnect design based on regenerators and demonstrate near optimal performance and energy efficiency across the supply voltage of 0.3V and 1V

Interconnect and Memory Design for Intelligent Mobile System

Technology scaling has driven the transistor to a smaller area, higher performance and lower power consuming which leads us into the mobile and edge computing era. However, the benefits of technology scaling are diminishing today, as the wire delay and energy scales far behind that of the logics, which makes communication more expensive than computation. Moreover, emerging data centric algorithms like deep learning have a growing demand on SRAM capacity and bandwidth. High access energy and huge leakage of the large on-chip SRAM have become the main limiter of realizing an energy efficient low power smart sensor platform. This thesis presents several architecture and circuit solutions to enable intelligent mobile systems, including voltage scalable interconnect scheme, Compute-In-Memory (CIM), low power memory system from edge deep learning processor and an ultra-low leakage stacked voltage domain SRAM for low power smart image signal processor (ISP). Four prototypes are implemented for demonstration and verification. The first two seek the solutions to the slow and high energy global on-chip interconnect: the first prototype proposes a reconfigurable self-timed regenerator based global interconnect scheme to achieve higher performance and energy-efficiency in wide voltage range, while the second one presents a non Von Neumann architecture, a hybrid in-/near-memory Compute SRAM (CRAM), to address the locality issue. The next two works focus on low-power low-leakage SRAM design for Intelligent sensors. The third prototype is a low power memory design for a deep learning processor with 270KB custom SRAM and Non-Uniform Memory Access architecture. The fourth prototype is an ultra-low leakage SRAM for motion-triggered low power smart imager sensor system with voltage domain stacking and a novel array swapping mechanism. The work presented in this dissertation exploits various optimizations in both architecture level (exploiting temporal and spatial locality) and circuit customization to overcome the main challenges in making extremely energy-efficient battery-powered intelligent mobile devices. The impact of the work is significant in the era of Internet-of-Things (IoT) and the age of AI when the mobile computing systems get ubiquitous, intelligent and longer battery life, powered by these proposed solutions.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/155232/1/jiwang_1.pd

Optical Networks and Interconnects

The rapid evolution of communication technologies such as 5G and beyond, rely on optical networks to support the challenging and ambitious requirements that include both capacity and reliability. This chapter begins by giving an overview of the evolution of optical access networks, focusing on Passive Optical Networks (PONs). The development of the different PON standards and requirements aiming at longer reach, higher client count and delivered bandwidth are presented. PON virtualization is also introduced as the flexibility enabler. Triggered by the increase of bandwidth supported by access and aggregation network segments, core networks have also evolved, as presented in the second part of the chapter. Scaling the physical infrastructure requires high investment and hence, operators are considering alternatives to optimize the use of the existing capacity. This chapter introduces different planning problems such as Routing and Spectrum Assignment problems, placement problems for regenerators and wavelength converters, and how to offer resilience to different failures. An overview of control and management is also provided. Moreover, motivated by the increasing importance of data storage and data processing, this chapter also addresses different aspects of optical data center interconnects. Data centers have become critical infrastructure to operate any service. They are also forced to take advantage of optical technology in order to keep up with the growing capacity demand and power consumption. This chapter gives an overview of different optical data center network architectures as well as some expected directions to improve the resource utilization and increase the network capacity

Numerical Model for 32-Bit Magnonic Ripple Carry Adder

In CMOS-based electronics, the most straightforward way to implement a summation operation is to use the ripple carry adder (RCA). Magnonics, the field of science concerned with data processing by spin waves and their quanta magnons, recently proposed a magnonic half-adder that can be considered as the simplest magnonic integrated circuit. Here, we develop a computation model for the magnonic basic blocks to enable the design and simulation of magnonic gates and magnonic circuits of arbitrary complexity and demonstrate its functionality on the example of a 32-bit integrated RCA. It is shown that the RCA requires the utilization of additional regenerators based on magnonic directional couplers with embedded amplifiers to normalize the magnon signals in-between the half-adders. The benchmarking of large-scale magnonic integrated circuits is performed. The energy consumption of 30 nm-based magnonic 32-bit adder can be as low as 961 aJ per operation with taking into account all required amplifiers

The NASA SBIR product catalog

The purpose of this catalog is to assist small business firms in making the community aware of products emerging from their efforts in the Small Business Innovation Research (SBIR) program. It contains descriptions of some products that have advanced into Phase 3 and others that are identified as prospective products. Both lists of products in this catalog are based on information supplied by NASA SBIR contractors in responding to an invitation to be represented in this document. Generally, all products suggested by the small firms were included in order to meet the goals of information exchange for SBIR results. Of the 444 SBIR contractors NASA queried, 137 provided information on 219 products. The catalog presents the product information in the technology areas listed in the table of contents. Within each area, the products are listed in alphabetical order by product name and are given identifying numbers. Also included is an alphabetical listing of the companies that have products described. This listing cross-references the product list and provides information on the business activity of each firm. In addition, there are three indexes: one a list of firms by states, one that lists the products according to NASA Centers that managed the SBIR projects, and one that lists the products by the relevant Technical Topics utilized in NASA's annual program solicitation under which each SBIR project was selected

High-Speed and Low-Energy On-Chip Communication Circuits.

Continuous technology scaling sharply reduces transistor delays, while fixed-length global wire delays have increased due to less wiring pitch with higher resistance and coupling capacitance. Due to this ever growing gap, long on-chip interconnects pose well-known latency, bandwidth, and energy challenges to high-performance VLSI systems. Repeaters effectively mitigate wire RC effects but do little to improve their energy costs. Moreover, the increased complexity and high level of integration requires higher wire densities, worsening crosstalk noise and power consumption of conventionally repeated interconnects. Such increasing concerns in global on-chip wires motivate circuits to improve wire performance and energy while reducing the number of repeaters. This work presents circuit techniques and investigation for high-performance and energy-efficient on-chip communication in the aspects of encoding, data compression, self-timed current injection, signal pre-emphasis, low-swing signaling, and technology mapping. The improved bus designs also consider the constraints of robust operation and performance/energy gains across process corners and design space. Measurement results from 5mm links on 65nm and 90nm prototype chips validate 2.5-3X improvement in energy-delay product.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/75800/1/jseo_1.pd

An Optical Grooming Switch for High-Speed Traffic Aggregation in Time, Space and Wavelength

In this book a novel optical switch is designed, developed, and tested. The switch integrates optical switching, transparent traffic aggregation/grooming, and optical regener-ation. Innovative switch subsystems are developed that enable these functionalities, including all-optical OTDM-to-WDM converters. High capacity ring interconnection between metro-core rings, carrying 130 Gbit/s OTDM traffic, and metro-access rings carring 43 Gbit/s WDM traffic is experimentally demonstrated. The developed switch features flexibility in bandwidth provisioning, scalability to higher traffic volumes, and backward compatibility with existing network implementations in a future-proof way

Roadmap of optical communications

© 2016 IOP Publishing Ltd. Lightwave communications is a necessity for the information age. Optical links provide enormous bandwidth, and the optical fiber is the only medium that can meet the modern society's needs for transporting massive amounts of data over long distances. Applications range from global high-capacity networks, which constitute the backbone of the internet, to the massively parallel interconnects that provide data connectivity inside datacenters and supercomputers. Optical communications is a diverse and rapidly changing field, where experts in photonics, communications, electronics, and signal processing work side by side to meet the ever-increasing demands for higher capacity, lower cost, and lower energy consumption, while adapting the system design to novel services and technologies. Due to the interdisciplinary nature of this rich research field, Journal of Optics has invited 16 researchers, each a world-leading expert in their respective subfields, to contribute a section to this invited review article, summarizing their views on state-of-the-art and future developments in optical communications