A Survey of Low Duty Cycle MAC Protocols in Wireless Sensor Networks

22 page(s

Survey: energy efficient protocols using radio scheduling in wireless sensor network

An efficient energy management scheme is crucial factor for design and implementation of any sensor network. Almost all sensor networks are structured with numerous small sized, low cost sensor devices which are scattered over the large area. To improvise the network performance by high throughput with minimum energy consumption, an energy efficient radio scheduling MAC protocol is effective solution, since MAC layer has the capability to collaborate with distributed wireless networks. The present survey study provides relevant research work towards radio scheduling mechanism in the design of energy efficient wireless sensor networks (WSNs). The various radio scheduling protocols are exist in the literature, which has some limitations. Therefore, it is require developing a new energy efficient radio scheduling protocol to perform multi tasks with minimum energy consumption (e.g. data transmission). The most of research studies paying more attention towards to enhance the overall network lifetime with the aim of using energy efficient scheduling protocol. In that context, this survey study overviews the different categories of MAC based radio scheduling protocols and those protocols are measured by evaluating their data transmission capability, energy efficiency, and network performance. With the extensive analysis of existing works, many research challenges are stated. Also provides future directions for new WSN design at the end of this survey

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

On the Medium Access Control Protocols Suitable for Wireless Sensor Networks – A Survey

A MAC (Medium Access Control) protocol has direct impact on the energy efficiency and traffic characteristics of any Wireless Sensor Network (WSN). Due to the inherent differences in WSN’s requirements and application scenarios, different kinds of MAC protocols have so far been designed especially targeted to WSNs, though the primary mode of communications is wireless like any other wireless network. This is the subject topic of this survey work to analyze various aspects of the MAC protocols proposed for WSNs. To avoid collision and ensure reliability, before any data transmission between neighboring nodes in MAC layer, sensor nodes may need sampling channel and synchronizing. Based on these needs, we categorize the major MAC protocols into three classes, analyze each protocol’s relative advantages and disadvantages, and finally present a comparative summary which could give a snapshot of the state-of-the-art to guide other researchers find appropriate areas to work on. In spite of various existing survey works, we have tried to cover all necessary aspects with the latest advancements considering the major works in this area

An ultra-low duty cycle sleep scheduling protocol stack for wireless sensor networks

A wireless sensor network is a distributed network system consisting of miniature spatially distributed autonomous devices designed for using sensors to sense the environment and cooperatively perform a specific goal. Each sensor node contains a limited power source, a sensor and a radio through which it can communicate with other sensor nodes within its communication radius. Since these sensor nodes may be deployed in inaccessible terrains, it might not be possible to replace their power sources. The radio transceiver is the hardware component that uses the most power in a sensor node and the optimisation of this element is necessary to reduce the overall energy consumption. In the data link layer there are several major sources of energy waste which should be minimised to achieve greater energy efficiency: idle listening, overhearing, over-emitting, network signalling overhead, and collisions. Sleep scheduling utilises the low-power sleep state of a transceiver and aims to reduce energy wastage caused by idle listening. Idle listening occurs when the radio is on, even though there is no data to transmit or receive. Collisions are reduced by using medium reservation and carrier sensing; collisions occur when there are simultaneous transmissions from several nodes that are within the interference range of the receiver node. The medium reservation packets include a network allocation vector field which is used for virtual carrier sensing which reduces overhearing. Overhearing occurs when a node receives and decodes packets that are not destined to it. Proper scheduling can avoid energy wastage due to over-emitting; over-emitting occurs when a transmitter node transmits a packet while the receiver node is not ready to receive packets. A protocol stack is proposed that achieves an ultra-low duty cycle sleep schedule. The protocol stack is aimed at large nodal populations, densely deployed, with periodic sampling applications. It uses the IEEE 802.15.4 Physical Layer (PHY) standard in the 2.4 GHz frequency band. A novel hybrid data-link/network cross-layer solution is proposed using the following features: a global sleep schedule, geographical data gathering tree, Time Division Multiple Access (TDMA) slotted architecture, Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), Clear Channel Assessment (CCA) with a randomised contention window, adaptive listening using a conservative timeout activation mechanism, virtual carrier sensing, clock drift compensation, and error control. AFRIKAANS : 'n Draadlose sensor-netwerk is 'n verspreide netwerk stelsel wat bestaan uit miniatuur ruimtelik verspreide outonome toestelle wat ontwerp is om in harmonie saam die omgewing te meet. Elke sensor nodus besit 'n beperkte bron van energie, 'n sensor en 'n radio waardeur dit met ander sensor nodusse binne hulle kommunikasie radius kan kommunikeer. Aangesien hierdie sensor nodusse in ontoeganklike terreine kan ontplooi word, is dit nie moontlik om hulle kragbronne te vervang nie. Die radio is die hardeware komponent wat van die meeste krag gebruik in 'n sensor nodus en die optimalisering van hierdie element is noodsaaklik vir die verminder die totale energieverbruik. In die data-koppelvlak laag is daar verskeie bronne van energie vermorsing wat minimaliseer moet word: ydele luister, a uistering, oor-uitstraling, oorhoofse netwerk seine, en botsings. Slaap-skedulering maak gebruik van die lae-krag slaap toestand van 'n radio met die doel om energie vermorsing wat veroorsaak word deur ydele luister, te verminder. Ydele luister vind plaas wanneer die radio aan is selfs al is daar geen data om te stuur of ontvang nie. Botsings word verminder deur medium bespreking en draer deteksie; botsings vind plaas wanneer verskeie nodusse gelyktydig data stuur. Die medium bespreking pakkies sluit 'n netwerk aanwysing vektor veld in wat gebruik word vir virtuele draer deteksie om a uistering te verminder. Afluistering vind plaas wanneer 'n nodus 'n pakkie ontvang en dekodeer maar dit was vir 'n ander nodus bedoel. Behoorlike skedulering kan energie verkwisting as gevolg van oor-uistraling verminder; oor-uistraling gebeur wanneer 'n sender nodus 'n pakkie stuur terwyl die ontvang nog nie gereed is nie. 'n Protokol stapel is voorgestel wat 'n ultra-lae slaap-skedule dienssiklus het. Die protokol is gemik op draadlose sensor-netwerke wat dig ontplooi, groot hoeveelhede nodusse bevat, en met periodiese toetsing toepassings. Dit maak gebruik van die IEEE 802.15.4 Fisiese-Laag standaard in die 2.4 GHz frekwensie band. 'n Nuwe baster datakoppelvlak/netwerk laag oplossing is voorgestel met die volgende kenmerke: globale slaap-skedulering, geogra ese data rapportering, Tyd-Verdeling-Veelvuldige-Toegang (TVVT) gegleufde argitektuur, Draer-Deteksie-Veelvuldige-Toegang met Botsing-Vermyding (DDVT/BV), Skoon-Kanaal-Assessering (SKA) met 'n wisselvallige twis-tydperk, aanpasbare slaap-skedulering met 'n konserwatiewe aktiverings meganisme, virtuele draer-deteksie, klok-wegdrywing kompensasie, en fout beheer. CopyrightDissertation (MEng)--University of Pretoria, 2012.Electrical, Electronic and Computer Engineeringunrestricte

Energy-efficient wireless sensor networks via scheduling algorithm and radio Wake-up technology

One of the most important requirements for wireless sensor networks (WSNs) is the energy efficiency, since sensors are usually fed by a battery that cannot be replaced or recharged. Radio wake-up - the technology that lets a sensor completely turn off and be reactivated by converting the electromagnetic field of radio waves into energy - is now one of the most emergent strategies in the design of wireless sensor networks. This work presents Scheduled on Demand Radio WakeUp (SORW), a flexible scheduler designed for a wireless sensor network where duty cycling strategy and radio wake-up technology are combined in order to optimize the network lifetime. In particular, it tries to keep sensors sleeping as much as possible, still guaranteeing a minimum number of detections per unit of time. Performances of SORW are provided through the use of OMNet++ simulator and compared to results obtained by other basic approaches. Results show that with SORW it is possible to reach a theoretical lifetime of several years, compared to simpler schedulers that only reach days of activity of the network

Dynamic cluster scheduling for cluster-tree WSNs

While Cluster-Tree network topologies look promising for WSN applications with timeliness and energy-efficiency requirements, we are yet to witness its adoption in commercial and academic solutions. One of the arguments that hinder the use of these topologies concerns the lack of flexibility in adapting to changes in the network, such as in traffic flows. This paper presents a solution to enable these networks with the ability to self-adapt their clusters’ duty-cycle and scheduling, to provide increased quality of service to multiple traffic flows. Importantly, our approach enables a network to change its cluster scheduling without requiring long inaccessibility times or the re-association of the nodes. We show how to apply our methodology to the case of IEEE 802.15.4/ZigBee cluster-tree WSNs without significant changes to the protocol. Finally, we analyze and demonstrate the validity of our methodology through a comprehensive simulation and experimental validation using commercially available technology on a Structural Health Monitoring application scenario

On a Joint Physical Layer and Medium Access Control Sublayer Design for Efficient Wireless Sensor Networks and Applications

Wireless sensor networks (WSNs) are distributed networks comprising small sensing devices equipped with a processor, memory, power source, and often with the capability for short range wireless communication. These networks are used in various applications, and have created interest in WSN research and commercial uses, including industrial, scientific, household, military, medical and environmental domains. These initiatives have also been stimulated by the finalisation of the IEEE 802.15.4 standard, which defines the medium access control (MAC) and physical layer (PHY) for low-rate wireless personal area networks (LR-WPAN). Future applications may require large WSNs consisting of huge numbers of inexpensive wireless sensor nodes with limited resources (energy, bandwidth), operating in harsh environmental conditions. WSNs must perform reliably despite novel resource constraints including limited bandwidth, channel errors, and nodes that have limited operating energy. Improving resource utilisation and quality-of-service (QoS), in terms of reliable connectivity and energy efficiency, are major challenges in WSNs. Hence, the development of new WSN applications with severe resource constraints will require innovative solutions to overcome the above issues as well as improving the robustness of network components, and developing sustainable and cost effective implementation models. The main purpose of this research is to investigate methods for improving the performance of WSNs to maintain reliable network connectivity, scalability and energy efficiency. The study focuses on the IEEE 802.15.4 MAC/PHY layers and the carrier sense multiple access with collision avoidance (CSMA/CA) based networks. First, transmission power control (TPC) is investigated in multi and single-hop WSNs using typical hardware platform parameters via simulation and numerical analysis. A novel approach to testing TPC at the physical layer is developed, and results show that contrary to what has been reported from previous studies, in multi-hop networks TPC does not save energy. Next, the network initialization/self-configuration phase is addressed through investigation of the 802.15.4 MAC beacon interval setting and the number of associating nodes, in terms of association delay with the coordinator. The results raise doubt whether that the association energy consumption will outweigh the benefit of duty cycle power management for larger beacon intervals as the number of associating nodes increases. The third main contribution of this thesis is a new cross layer (PHY-MAC) design to improve network energy efficiency, reliability and scalability by minimising packet collisions due to hidden nodes. This is undertaken in response to findings in this thesis on the IEEE 802.15.4 MAC performance in the presence of hidden nodes. Specifically, simulation results show that it is the random backoff exponent that is of paramount importance for resolving collisions and not the number of times the channel is sensed before transmitting. However, the random backoff is ineffective in the presence of hidden nodes. The proposed design uses a new algorithm to increase the sensing coverage area, and therefore greatly reduces the chance of packet collisions due to hidden nodes. Moreover, the design uses a new dynamic transmission power control (TPC) to further reduce energy consumption and interference. The above proposed changes can smoothly coexist with the legacy 802.15.4 CSMA/CA. Finally, an improved two dimensional discrete time Markov chain model is proposed to capture the performance of the slotted 802.15.4 CSMA/CA. This model rectifies minor issues apparent in previous studies. The relationship derived for the successful transmission probability, throughput and average energy consumption, will provide better performance predictions. It will also offer greater insight into the strengths and weaknesses of the MAC operation, and possible enhancement opportunities. Overall, the work presented in this thesis provides several significant insights into WSN performance improvements with both existing protocols and newly designed protocols. Finally, some of the numerous challenges for future research are described

Emerging Communications for Wireless Sensor Networks

Wireless sensor networks are deployed in a rapidly increasing number of arenas, with uses ranging from healthcare monitoring to industrial and environmental safety, as well as new ubiquitous computing devices that are becoming ever more pervasive in our interconnected society. This book presents a range of exciting developments in software communication technologies including some novel applications, such as in high altitude systems, ground heat exchangers and body sensor networks. Authors from leading institutions on four continents present their latest findings in the spirit of exchanging information and stimulating discussion in the WSN community worldwide