From computer-aided to intelligent machining: Recent advances in computer numerical control machining research

The aim of this paper is to provide an introduction and overview of recent advances in the key technologies and the supporting computerized systems, and to indicate the trend of research and development in the area of computational numerical control machining. Three main themes of recent research in CNC machining are simulation, optimization and automation, which form the key aspects of intelligent manufacturing in the digital and knowledge based manufacturing era. As the information and knowledge carrier, feature is the efficacious way to achieve intelligent manufacturing. From the regular shaped feature to freeform surface feature, the feature technology has been used in manufacturing of complex parts, such as aircraft structural parts. The authors’ latest research in intelligent machining is presented through a new concept of multi-perspective dynamic feature (MpDF), for future discussion and communication with readers of this special issue. The MpDF concept has been implemented and tested in real examples from the aerospace industry, and has the potential to make promising impact on the future research in the new paradigm of intelligent machining. The authors of this paper are the guest editors of this special issue on computational numerical control machining. The guest editors have extensive and complementary experiences in both academia and industry, gained in China, USA and UK

Multiresolution analysis as an approach for tool path planning in NC machining

Wavelets permit multiresolution analysis of curves and surfaces. A complex curve can be decomposed using wavelet theory into lower resolution curves. The low-resolution (coarse) curves are similar to rough-cuts and high-resolution (fine) curves to finish-cuts in numerical controlled (NC) machining.;In this project, we investigate the applicability of multiresolution analysis using B-spline wavelets to NC machining of contoured 2D objects. High-resolution curves are used close to the object boundary similar to conventional offsetting, while lower resolution curves, straight lines and circular arcs are used farther away from the object boundary.;Experimental results indicate that wavelet-based multiresolution tool path planning improves machining efficiency. Tool path length is reduced, sharp corners are smoothed out thereby reducing uncut areas and larger tools can be selected for rough-cuts

Optimal choice of machine tool for a machining job in a CAE environment

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Developments in cutting tools, coolants, drives, controls, tool changers, pallet changers and the philosophy of machine tool design have made ground breaking changes in machine tools and machining processes. Modern Machining Centres have been developed to perform several operations on several faces of a workpiece in a single setup. On the other hand industry requires high value added components, which have many quality critical features to be manufactured in an outsourcing environment as opposed to the traditional in-house manufacture. The success of this manufacture critically depends on matching the advanced features of the machine tools to the complexity of the component. This project has developed a methodology to represent the features of a machine tool in the form of an alphanumeric string and the features of the component in another string. The strings are then matched to choose the most suitable and economical Machine Tool for the component’s manufacture. Literature identified that block structure is the way to answer the question ‘how to systematically describe the layout of such a machining centre’. Incomplete attempts to describe a block structure as alphanumeric strings were also presented in the literature. Survey on sales literature from several machine tool suppliers was investigated to systematically identify the features need by the user for the choice of a machine tool. Combining these, a new alphanumeric string was developed to represent machine tools. Using these strings as one of the ‘key’s for sorting a database of machine tools was developed. A supporting database of machine tools was also developed. Survey on machining on the other hand identified, that machining features can be used as a basis for planning the machining of a component. It analysed various features and feature sets proposed and provided and their recognition in CAD models. Though a vast number of features were described only two sets were complete sets. The project was started with one of them, (the other was carrying too many unwanted details for the task of this project) machining features supported by ‘Expert Machinist’ software. But when it became unavailable a ‘Feature set’ along those lines were defined and used in the generation of an alphanumeric string to represent the work. Comparing the two strings led the choice of suitable machines from the database. The methodology is implemented as a bolt on software incorporated within Pro/Engineer software where one can model any given component using cut features (mimicking machining operation) and produce a list of machine tools having features for the machining of that component. This will enable outsourcing companies to identify those Precision Engineers who have the machine tools with the matching apabilities. Supporting software and databases were developed using Access Database, Visual Basic and C with Pro/TOOLKIT functions. The resulting software suite was tested on several case studies and found to be effective

Computer aided process planning for multi-axis CNC machining using feature free polygonal CAD models

This dissertation provides new methods for the general area of Computer Aided Process Planning, often referred to as CAPP. It specifically focuses on 3 challenging problems in the area of multi-axis CNC machining process using feature free polygonal CAD models. The first research problem involves a new method for the rapid machining of Multi-Surface Parts. These types of parts typically have different requirements for each surface, for example, surface finish, accuracy, or functionality. The CAPP algorithms developed for this problem ensure the complete rapid machining of multi surface parts by providing better setup orientations to machine each surface. The second research problem is related to a new method for discrete multi-axis CNC machining of part models using feature free polygonal CAD models. This problem specifically considers a generic 3-axis CNC machining process for which CAPP algorithms are developed. These algorithms allow the rapid machining of a wide variety of parts with higher geometric accuracy by enabling access to visible surfaces through the choice of appropriate machine tool configurations (i.e. number of axes). The third research problem addresses challenges with geometric singularities that can occur when 2D slice models are used in process planning. The conversion from CAD to slice model results in the loss of model surface information, the consequence of which could be suboptimal or incorrect process planning. The algorithms developed here facilitate transfer of complete surface geometry information from CAD to slice models. The work of this dissertation will aid in developing the next generation of CAPP tools and result in lower cost and more accurately machined components

A concurrent approach to automated manufacturing process planning

textWith the increasing demand of fast-paced and hybrid manufacturing processes in modern industry, it is desirable to expedite the iterations between design and manufacturing through intelligent computational techniques. In this research, we propose a concurrent approach of this kind to streamline the design and manufacturing processes. With this approach, a CAD design is automatically analyzed in terms of its manufacturability in the early design stage. If the part is manufacturable, a set of process plans optimized in time, cost, fixture quality and tolerance satisfaction are reported in real time. If the part is not manufacturable, the potential design changes are provided for better manufacturing. In the approach, the geometric information of 3D models and the empirical knowledge in manufacturing processes, fixtures, and tolerances are combined and encapsulated into a graph-grammar based reasoning. The reasoning systematically extracts meaningful manufacturing details that later constitute complete process plans for any given solid model. The plans are then evaluated and optimized using a specially designed multi-objective best first search technique. The complete approach enables a concurrent and efficient manufacturability analysis tool that closely resembles real manufacturing planning practice. Numerous case studies with real engineering parts are presented to characterize the novelty and contributions of this approach. The optimality of the suggested plans is verified through computational comparisons, and the practicality of the plans is validated with hands-on implementations on the shop floor.Mechanical Engineerin

A new geometric-and-physics model of milling and an effective approach to medial axis transforms of free-form pockets for high performance machining

Mechanical part quality and productivity depend on many parameters in CNC milling processes, such as workpiece material, cutters, tool paths, feed rate, and spindle speed, etc. To pursue high performance machining, the cutting parameter optimization is in high demand in industry, though it is quite challenge. This innovative research successfully addresses some essential problems in optimizing the cutting parameters by developing a new geometric-and-physics integrated model of milling and proposing an effective approach to the medial axis transforms of free-form pockets. In this research, an original geometric model of 21/2- and 3-axis CNC milling is developed and integrated with a well-established mechanistic model. A main research contribution is that this integrated model can predict complex milling processes in higher fidelity with instantaneous material remove rates, cutting forces and spindle powers, compared to prior machining models. In the geometric model, an in-process workpiece model is introduced by using a group of discrete Z-layers and applying the B-Rep scheme to represent the workpiece shape on each layer, in order to accurately represent instantaneous cutter-and-workpiece engagement in 2Yz- and 3-axis milling. Hence, the un-deformed chip geometry can be found even for complex part milling, which is then fed to the mechanistic model to predict instantaneous cutting forces. By using this integrated model, cutting parameters can be optimized for profiling, pocketing, and surface milling to ensure steady cut and the maximum material removal rates. This model has been verified by experiments, and will be implemented into a software tool for Bombardier Aerospace. Another important research in this work is to propose aggressive roughing of free-form pockets for ultimately high cutting efficiency. For this purpose, an accurate, efficient approach to the medial axis transforms of free-form pockets and an optimal approach to multiple cutters selection and their path generation are proposed. The main contributions of this research include (1) a new mathematical model of medial axis point, (2) an innovative global optimization solver, the hybrid global optimization method, (3) an optimization model of selecting multiple cutters for the maximum material removal rate. This research can substantially promote aggressive roughing in the machining industry to increase cutting efficiency of free-form pockets. The technique has been validated using considerable number of cutting tests and can be directly implemented into commercial CAD/CAM softwar

Development of a manufacturing feature-based design system

Traditional CAD systems are based on the serial approach of the product development cycle: the design process is not integrated with other activities and thus it can not provide information for subsequent phases of product development. In order to eliminate this problem, many modern CAD systems allow the composition of designs from building blocks of higher level of abstraction called features. Although features used in current systems tend to be named after manufacturing processes, they do not, in reality, provide valuable manufacturing data. Apart from the obvious disadvantage that process engineers need to re-evaluate the design and capture the intent of the designer, this approach also prohibits early detection of possible manufacturing problems. This research attempts to bring the design and manufacturing phases together by implementing manufacturing features. A design is composed entirely in a bottom-up manner using manufacturable entities in the same way as they would be produced during the manufacturing phase. Each feature consists of parameterised geometry, manufacturing information (including machine tool, cutting tools, cutting conditions, fixtures, and relative cost information), design limitations, functionality rules, and design-for-manufacture rules. The designer selects features from a hierarchical feature library. Upon insertion of a feature, the system ensures that no functionality or manufacturing rules are violated. If a feature is modified, the system validates the feature by making sure that it remains consistent with its original functionality and design-for-manufacture rules are re-applied. The system also allows analysis of designs, from a manufacturing point of view, that were not composed using features. In order to reduce the complexity of the system, design functionality and design-for manufacture rules are organised into a hierarchical system and are pointed to the appropriate entries of the feature hierarchy. The system makes it possible to avoid costly designs by eliminating possible manufacturing problems early in the product development cycle. It also makes computer-aided process planning feasible. The system is developed as an extension of a commercially available CAD/CAM system (Pro/Engineer), and at its current stage only deals with machining features. However, using the same principles, it can be expanded to cover other kinds of manufacturing processes

Technological preparation of a manufacturing process to produce a part “Bushing”

This work primarily focuses on the technological preparation required for the manufacturing process involved in producing a part bearing housing. The thesis consists of 63 A4-sized sheets and drawings and upon a total of 17 literature sources, including reference books and scientific papers. Chapter 4 of this thesis extensively discusses the topic of plunge milling. The mechanism behind plunge milling is thoroughly examined. The overall objective of this work is to provide a comprehensive understanding of the technological aspects involved in preparing the manufacturing process for producing a part “Bushing” It encompasses critical elements such as process planning, fixture design, economic analysis, safety measures, and addressing the challenge of burr formation