530 research outputs found
Lightly synchronized Multipacket Reception in Machine-Type Communications Networks
Machine Type Communication (MTC) applications were designed to monitor and control
elements of our surroundings and environment. MTC applications have a different
set of requirements compared to the traditional communication devices, with Machine to
Machine (M2M) data being mostly short, asynchronous, bursty and sometimes requiring end-to-end delays below 1ms. With the growth of MTC, the new generation of mobile communications has to be able to present different types of services with very different requirements, i.e. the same network has to be capable of "supplying" connection to the user that just wants to download a video or use social media, allowing at the same time MTC that has completely different requirements, without deteriorating both experiences.
The challenges associated to the implementation of MTC require disruptive changes at
the Physical (PHY) and Medium Access Control (MAC) layers, that lead to a better use of the spectrum available. The orthogonality and synchronization requirements of the PHY layer of current Long Term Evolution Advanced (LTE-A) radio access network (based on glsofdm and Single Carrier Frequency Domain Equalization (SC-FDE)) are obstacles for this new 5th Generation (5G) architecture. Generalized Frequency Division Multiplexing (GFDM) and other modulation techniques were proposed as candidates for the 5G PHY layer, however they also suffer from visible degradation when the transmitter and receiver are not synchronized, leading to a poor performance when collisions occur in an asynchronous MAC layer. This dissertation addresses the requirements of M2M traffic at the MAC layer applying multipacket reception (MPR) techniques to handle the bursty nature of the traffic and synchronization tones and optimized back-off approaches to reduce the delay. It proposes a new MAC protocol and analyses its performance analytically considering an SC-FDE modulation. The models are validated using a system level cross-layer simulator developed in MATLAB, which implements the MAC protocol and applies PHY layer performance models. The results show that the MAC’s latency depends mainly on the number of users and the load of each user, and can be controlled using these two parameters
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
Implementation and Analysis of Spectral Subtraction and Signal Separation in Deterministic Wide-Band Anti-Jamming Scenarios
With the increasing volume of wireless traffic that military operations require, the likelihood of transmissions interfering with each other is steadily growing to the point that new techniques need to be employed. Furthermore, to combat remotely operated improvised explosive devices, many ground convoys transmit high-power broadband jamming signals, which block both hostile as well as friendly communications. These wide-band jamming fields pose a serious technical challenge to existing anti-jamming solutions that are currently employed by the Navy and Marine Corps. This thesis examines the feasibility of removing such deterministic jammers from the spectral environment, enabling friendly communications. Anti-jamming solutions in self-jamming environments are rarely considered in the literature, principally due to the non-traditional nature of such jamming techniques. As a result, a combination of approaches are examined which include: Antenna Subset Selection, Spectral Subtraction, and Source Separation. These are combined to reduce environmental interference for reliable transmissions. Specific operational conditions are considered and evaluated, primarily to define the limitations and utility of such a system. A final prototype was constructed using a collection of USRP software defined radios, providing solid conclusions of the overall system performance
Channel Estimation in Multicarrier Communication Systems
The data rate and spectrum efficiency of wireless mobile communications have been significantly improved over the last decade or so. Recently, the advanced systems such as 3GPP LTE and terrestrial digital TV broadcasting have been
sophisticatedly developed using OFDM and CDMA technology. In general, most mobile communication systems transmit bits of information in the radio space to the receiver. The radio channels in mobile radio systems are usually multipath fading channels, which cause inter-symbol interference (ISI) in the received signal. To remove ISI from the signal, there is a need of strong equalizer which requires knowledge on the channel impulse response (CIR).This is primarily provided by a separate channel estimator. Usually the channel estimation is based on the known sequence of bits, which is unique for a certain transmitter and which is repeated in every transmission burst. Thus, the channel estimator is able to estimate CIR for each burst separately by exploiting the known transmitted bits and the corresponding received samples.
In this thesis we investigate and compare various efficient channel estimation schemes for OFDM systems which can also be extended to MC DS-CDMA systems.The channel estimation can be performed by either inserting pilot tones into all subcarriers of OFDM symbols with a specific period or inserting pilot tones into each OFDM symbol. Two major types of pilot arrangement such as block type and comb type
pilot have been focused employing Least Square Error (LSE) and Minimum Mean Square Error (MMSE) channel estimators. Block type pilot sub-carriers is especially suitable for slow-fading radio channels whereas comb type pilots provide
better resistance to fast fading channels. Also comb type pilot arrangement is sensitive to frequency selectivity when comparing to block type arrangement. However, there is
another supervised technique called Implicit Training (IT) based channel estimation which exploits the first order statistics in the received data, induced by superimposing
periodic training sequences with good correlation properties, along with the information symbols. Hence, the need for additional time slots for training the equalizer is avoided. The performance of the estimators is presented in terms of the mean square estimation error (MSEE) and bit error rate (BER)
Channel estimation and equalization in multiGigabit systems
In actual mobile radio systems, multipath conditions pose a problem, as the channel becomes frequency dependent. This point is especially critical in case of high frequency transmissions with very high data rate and high error performance, such as defined in the IEEE 802.15.3c which is an emerging 60-GHz standard supporting data rates of multi-giga bits per second (multi-Gbps) for short-range indoor applications. The deployment of such high speed wireless transmission has been very difficult throughout history mainly by two critical factors: the first one was the lack of wide enough spectrum and the second one is the high cost of high frequency circuits and devices. However, this trend is changing to the point that not too long ago, the substantial unlicensed spectrum became available at the millimeter-wave band of 60-GHz. Also, the advancement in technology drives the cost of 60-GHz circuits and devices much lower than in the past making possible its use for high definition audio and video wireless transmissions. In order to overcome the transmission channel issues, it is necessary to include a channel equalizer in the receiver, which must estimate the channel impulse response and make some operations to transform the frequency dependent channel to a flat channel. Nevertheless, the equalizer technology will depend on three different factors: first one the physical layer (PHY) technique under consideration for multi-Gbps Wireless Personal Area Network (WPAN) which basically could be orthogonal frequency division multiplexing (OFDM) or single-carrier frequency domain equalization (SC-FDE); second, the channel impulse response estimation carried out in order to determine the channel transfer function H(f), existing several methods to obtain an estimation; and third, the used equalization method and structure in order to reverse all distortions produced by the channel.
This Master thesis has been carry out during an Erasmus program in the Technische Universitat of Braunchweig, Germany, and it is the first part of a whole European project for the study, analysis and deployment of the IEEE 802.15.3c standard for wireless communications with very high data rate and high error performance in the 60-GHz band. According to the instructions and requirements defined by professor Thomas Kürner which was in charge of this project, this thesis include: first, a theoretical study of all the different propagation effects which could affect a wireless communication channel in order to run not only the simulations presented in this thesis but also the future simulations; second, the development of a model in Matlab/Simulink that will be useful to carry out all the project simulations (taken into account the specifications collected in IEEE 802.15.3c standard); third, the results of the carried simulations for Single Carrier Channel estimation and equalization by using two different equalization methods in the frequency domain: Zero Forcing and Minimum Mean Square Error equalization. Taking this into account, the thesis is organized as follows. Section I is dedicated to the study of all the different propagation effects and problems which affects a wireless communication transmissions; In Section II, technologies and Physical Layer Modes are described attending the IEEE 802.15.3c in order to learn its different characteristics for the subsequent channel estimation; Section III is devoted to channel estimation and equalization methods description; estimation and equalization methods are selected in order to carry out the simulations in Section IV; finally, in Section V the developed system simulator as well as the obtained simulation results are presented after implementation of Zero Forcing and Minimum Mean Square Error equalization methods in Matlab/Simulink
Transmission strategies for broadband wireless systems with MMSE turbo equalization
This monograph details efficient transmission strategies for single-carrier wireless broadband communication systems employing iterative (turbo) equalization. In particular, the first part focuses on the design and analysis of low complexity and robust MMSE-based turbo equalizers operating in the frequency domain. Accordingly, several novel receiver schemes are presented which improve the convergence properties and error performance over the existing turbo equalizers. The second part discusses concepts and algorithms that aim to increase the power and spectral efficiency of the communication system by efficiently exploiting the available resources at the transmitter side based upon the channel conditions. The challenging issue encountered in this context is how the transmission rate and power can be optimized, while a specific convergence constraint of the turbo equalizer is guaranteed.Die vorliegende Arbeit beschäftigt sich mit dem Entwurf und der Analyse von
effizienten Übertragungs-konzepten für drahtlose, breitbandige
Einträger-Kommunikationssysteme mit iterativer (Turbo-) Entzerrung und
Kanaldekodierung. Dies beinhaltet einerseits die Entwicklung von
empfängerseitigen Frequenzbereichs-entzerrern mit geringer Komplexität
basierend auf dem Prinzip der Soft Interference Cancellation Minimum-Mean
Squared-Error (SC-MMSE) Filterung und andererseits den Entwurf von
senderseitigen Algorithmen, die durch Ausnutzung von
Kanalzustandsinformationen die Bandbreiten- und Leistungseffizienz in Ein-
und Mehrnutzersystemen mit Mehrfachantennen (sog. Multiple-Input
Multiple-Output (MIMO)) verbessern.
Im ersten Teil dieser Arbeit wird ein allgemeiner Ansatz für Verfahren zur
Turbo-Entzerrung nach dem Prinzip der linearen MMSE-Schätzung, der
nichtlinearen MMSE-Schätzung sowie der kombinierten MMSE- und
Maximum-a-Posteriori (MAP)-Schätzung vorgestellt. In diesem Zusammenhang
werden zwei neue Empfängerkonzepte, die eine Steigerung der
Leistungsfähigkeit und Verbesserung der Konvergenz in Bezug auf
existierende SC-MMSE Turbo-Entzerrer in verschiedenen Kanalumgebungen
erzielen, eingeführt. Der erste Empfänger - PDA SC-MMSE - stellt eine
Kombination aus dem Probabilistic-Data-Association (PDA) Ansatz und dem
bekannten SC-MMSE Entzerrer dar. Im Gegensatz zum SC-MMSE nutzt der PDA
SC-MMSE eine interne Entscheidungsrückführung, so dass zur Unterdrückung
von Interferenzen neben den a priori Informationen der Kanaldekodierung
auch weiche Entscheidungen der vorherigen Detektions-schritte
berücksichtigt werden. Durch die zusätzlich interne
Entscheidungsrückführung erzielt der PDA SC-MMSE einen wesentlichen Gewinn
an Performance in räumlich unkorrelierten MIMO-Kanälen gegenüber dem
SC-MMSE, ohne dabei die Komplexität des Entzerrers wesentlich zu erhöhen.
Der zweite Empfänger - hybrid SC-MMSE - bildet eine Verknüpfung von
gruppenbasierter SC-MMSE Frequenzbereichsfilterung und MAP-Detektion.
Dieser Empfänger besitzt eine skalierbare Berechnungskomplexität und weist
eine hohe Robustheit gegenüber räumlichen Korrelationen in MIMO-Kanälen
auf. Die numerischen Ergebnisse von Simulationen basierend auf Messungen
mit einem Channel-Sounder in Mehrnutzerkanälen mit starken räumlichen
Korrelationen zeigen eindrucksvoll die Überlegenheit des hybriden
SC-MMSE-Ansatzes gegenüber dem konventionellen SC-MMSE-basiertem Empfänger.
Im zweiten Teil wird der Einfluss von System- und Kanalmodellparametern auf
die Konvergenzeigenschaften der vorgestellten iterativen Empfänger mit
Hilfe sogenannter Korrelationsdiagramme untersucht. Durch semi-analytische
Berechnungen der Entzerrer- und Kanaldecoder-Korrelationsfunktionen wird
eine einfache Berechnungsvorschrift zur Vorhersage der
Bitfehlerwahrscheinlichkeit von SC-MMSE und PDA SC-MMSE Turbo Entzerrern
für MIMO-Fadingkanäle entwickelt. Des Weiteren werden zwei Fehlerschranken
für die Ausfallwahrscheinlichkeit der Empfänger vorgestellt. Die
semi-analytische Methode und die abgeleiteten Fehlerschranken ermöglichen
eine aufwandsgeringe Abschätzung sowie Optimierung der Leistungsfähigkeit
des iterativen Systems.
Im dritten und abschließenden Teil werden Strategien zur Raten- und
Leistungszuweisung in Kommunikationssystemen mit konventionellen iterativen
SC-MMSE Empfängern untersucht. Zunächst wird das Problem der Maximierung
der instantanen Summendatenrate unter der Berücksichtigung der Konvergenz
des iterativen Empfängers für einen Zweinutzerkanal mit fester
Leistungsallokation betrachtet. Mit Hilfe des Flächentheorems von
Extrinsic-Information-Transfer (EXIT)-Funktionen wird eine obere Schranke
für die erreichbare Ratenregion hergeleitet. Auf Grundlage dieser Schranke
wird ein einfacher Algorithmus entwickelt, der für jeden Nutzer aus einer
Menge von vorgegebenen Kanalcodes mit verschiedenen Codierraten denjenigen
auswählt, der den instantanen Datendurchsatz des Mehrnutzersystems
verbessert. Neben der instantanen Ratenzuweisung wird auch ein
ausfallbasierter Ansatz zur Ratenzuweisung entwickelt. Hierbei erfolgt die
Auswahl der Kanalcodes für die Nutzer unter Berücksichtigung der Einhaltung
einer bestimmten Ausfallwahrscheinlichkeit (outage probability) des
iterativen Empfängers. Des Weiteren wird ein neues Entwurfskriterium für
irreguläre Faltungscodes hergeleitet, das die Ausfallwahrscheinlichkeit von
Turbo SC-MMSE Systemen verringert und somit die Zuverlässigkeit der
Datenübertragung erhöht. Eine Reihe von Simulationsergebnissen von
Kapazitäts- und Durchsatzberechnungen werden vorgestellt, die die
Wirksamkeit der vorgeschlagenen Algorithmen und Optimierungsverfahren in
Mehrnutzerkanälen belegen. Abschließend werden außerdem verschiedene
Maßnahmen zur Minimierung der Sendeleistung in Einnutzersystemen mit
senderseitiger Singular-Value-Decomposition (SVD)-basierter Vorcodierung
untersucht. Es wird gezeigt, dass eine Methode, welche die Leistungspegel
des Senders hinsichtlich der Bitfehlerrate des iterativen Empfängers
optimiert, den konventionellen Verfahren zur Leistungszuweisung überlegen
ist
- …