Store-and-forward CDC packet transmission in digital systems

Data transmission across clock domains is a major point of interest by ASIC designers as a limited bandwidth can be responsible for a processing power bottleneck that affects the entire system. Clock domain crossing is inherently expensive in terms of area and latency as it requires overcoming issues related to the physical nature of integrated circuit latches, in particular metastability. These issues are dangerous as they do not manifest in RTL simulation. Due to this, designers often opt for generic data synchronisation solutions that are not fully suited to the nature of the data being transferred.This dissertation presents a clock domain crossing mechanism that allows two clock domains to share a common memory to transfer packet-based data. The mechanism consists in a memory controller that coordinates commands from a push (write) domain and a pop (read) domain.The main objective of the memory controller project consists in the implementation of efficient synchronisation methods in order to eliminate the need for separate synchronisation and storage memories. In essence, the controller is an extension of an asynchronous FIFO controller with added functionality, supporting multiple virtual FIFOs and variable length data packets

Dynamic Binary Translation for Embedded Systems with Scratchpad Memory

Embedded software development has recently changed with advances in computing. Rather than fully co-designing software and hardware to perform a relatively simple task, nowadays embedded and mobile devices are designed as a platform where multiple applications can be run, new applications can be added, and existing applications can be updated. In this scenario, traditional constraints in embedded systems design (i.e., performance, memory and energy consumption and real-time guarantees) are more difficult to address. New concerns (e.g., security) have become important and increase software complexity as well. In general-purpose systems, Dynamic Binary Translation (DBT) has been used to address these issues with services such as Just-In-Time (JIT) compilation, dynamic optimization, virtualization, power management and code security. In embedded systems, however, DBT is not usually employed due to performance, memory and power overhead. This dissertation presents StrataX, a low-overhead DBT framework for embedded systems. StrataX addresses the challenges faced by DBT in embedded systems using novel techniques. To reduce DBT overhead, StrataX loads code from NAND-Flash storage and translates it into a Scratchpad Memory (SPM), a software-managed on-chip SRAM with limited capacity. SPM has similar access latency as a hardware cache, but consumes less power and chip area. StrataX manages SPM as a software instruction cache, and employs victim compression and pinning to reduce retranslation cost and capture frequently executed code in the SPM. To prevent performance loss due to excessive code expansion, StrataX minimizes the amount of code inserted by DBT to maintain control of program execution. When a hardware instruction cache is available, StrataX dynamically partitions translated code among the SPM and main memory. With these techniques, StrataX has low performance overhead relative to native execution for MiBench programs. Further, it simplifies embedded software and hardware design by operating transparently to applications without any special hardware support. StrataX achieves sufficiently low overhead to make it feasible to use DBT in embedded systems to address important design goals and requirements

Study of Virtual Memory

This research report gives a general description of virtual memory systems. The mechanisms and policies and their effect on the operation and efficiency of virtual memory are explained. A virtual memory using a real time virtual address decoder, to decode a 32 bits of virtual address for the secondary memory to obtain the primary address location discussed. The decoder is developed with the use of associative or content-addressable memories. Replacement algorithms, used for selecting the pages of the main memory to be replaced, are described. The hardware implementation of the least recently used and least often used replacement policies using associative memories is presented

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

Reducing the Number of Page Faults by Seperating Instructions and Data

Department of Computer Scienc

VIRTUAL MEMORY ON A MANY-CORE NOC

Many-core devices are likely to become increasingly common in real-time and embedded systems as computational demands grow and as expectations for higher performance can generally only be met by by increasing core numbers rather than relying on higher clock speeds. Network-on-chip devices, where multiple cores share a single slice of silicon and employ packetised communications, are a widely-deployed many-core option for system designers. As NoCs are expected to run larger and more complex programs, the small amount of fast, on-chip memory available to each core is unlikely to be sufficient for all but the simplest of tasks, and it is necessary to find an efficient, effective, and time-bounded, means of accessing resources stored in off-chip memory, such as DRAM or Flash storage. The abstraction of paged virtual memory is a familiar technique to manage similar tasks in general computing but has often been shunned by real-time developers because of concern about time predictability. We show it can be a poor choice for a many-core NoC system as, unmodified, it typically uses page sizes optimised for interaction with spinning disks and not solid state media, and transports significant volumes of subsequently unused data across already congested links. In this work we outline and simulate an efficient partial paging algorithm where only those memory resources that are locally accessed are transported between global and local storage. We further show that smaller page sizes add to efficiency. We examine the factors that lead to timing delays in such systems, and show we can predict worst case execution times at even safety-critical thresholds by using statistical methods from extreme value theory. We also show these results are applicable to systems with a variety of connections to memory