2,681 research outputs found
Localization in Unstructured Environments: Towards Autonomous Robots in Forests with Delaunay Triangulation
Autonomous harvesting and transportation is a long-term goal of the forest
industry. One of the main challenges is the accurate localization of both
vehicles and trees in a forest. Forests are unstructured environments where it
is difficult to find a group of significant landmarks for current fast
feature-based place recognition algorithms. This paper proposes a novel
approach where local observations are matched to a general tree map using the
Delaunay triangularization as the representation format. Instead of point cloud
based matching methods, we utilize a topology-based method. First, tree trunk
positions are registered at a prior run done by a forest harvester. Second, the
resulting map is Delaunay triangularized. Third, a local submap of the
autonomous robot is registered, triangularized and matched using triangular
similarity maximization to estimate the position of the robot. We test our
method on a dataset accumulated from a forestry site at Lieksa, Finland. A
total length of 2100\,m of harvester path was recorded by an industrial
harvester with a 3D laser scanner and a geolocation unit fixed to the frame.
Our experiments show a 12\,cm s.t.d. in the location accuracy and with
real-time data processing for speeds not exceeding 0.5\,m/s. The accuracy and
speed limit is realistic during forest operations
Estimation of forest variables using airborne laser scanning
Airborne laser scanning can provide three-dimensional measurements of the forest canopy with high efficiency and precision. There are presently a large number of airborne laser scanning instruments in operation. The aims of the studies reported in this thesis were, to develop and validate methods for estimation of forest variables using laser data, and to investigate the influence of laser system parameters on the estimates. All studies were carried out in hemi-boreal forest at a test area in southwestern Sweden (lat. 58°30’N, long. 13°40’ E). Forest variables were estimated using regression models. On plot level, the Root Mean Square Error (RMSE) for mean tree height estimations ranged between 6% and 11% of the average value for different datasets and methods. The RMSE for stem volume estimations ranged between 19% and 26% of the average value for different datasets and methods. On stand level (area 0.64 ha), the RMSE was 3% and 11% of the average value for mean tree height and stem volume estimations, respectively. A simulation model was used to investigate the effect of different scanning angles on laser measurement of tree height and canopy closure. The effect of different scanning angles was different within different simulated forest types, e.g., different tree species. High resolution laser data were used for detection of individual trees. In total, 71% of the field measurements were detected representing 91% of the total stem volume. Height and crown diameter of the detected trees could be estimated with a RMSE of 0.63 m and 0.61 m, respectively. The magnitude of the height estimation errors was similar to what is usually achieved using field inventory. Using different laser footprint diameters (0.26 to 3.68 m) gave similar estimation accuracies. The tree species Norway spruce (Picea abies L. Karst.) and Scots pine (Pinus sylvestris L.) were discriminated at individual tree level with an accuracy of 95%. The results in this thesis show that airborne laser scanners are useful as forest inventory tools. Forest variables can be estimated on tree level, plot level and stand level with similar accuracies as traditional field inventories
Feature Based Modeling and Mapping of Tree Trunks and Natural Terrain Using 3D Laser Scanner Measurement System
This paper presents a novel approach to measure tree trunks and to model the ground using a 3D laser scanner. The 3D scanner, self-build using two 2D Sick scanners on a rotating base, measures each scan line approximately at 45° angle towards the ground and the trees. Single scan lines are segmented to find ground and tree returns. 3D point clouds from the surrounding forest are recorded while the measuring vehicle is moving. Sequential scan lines are joined together as the pose changes are reduced from the older buffered measurements. Laser odometry and inertial measurements are used to measure the pose changes. The ground is modeled by fitting a 1m grid to 3D point cloud extracted using a ground return detector. Tree trunks are searched from the 3D point cloud using a histogram approach to segment measurements into separate point clouds for each tree trunk. Tree trunks are modeled using ten circle features one on the other using the extracted point cloud. Instead of using the whole point cloud, mapping is done only for the extracted features and the travelled path to save computation time. Our method can detect nearly all tree trunks and measure them on short ranges of less than 8m with errors less than 4cm in diameter.Peer reviewe
Ground Filtering Algorithms for Airborne LiDAR Data: A Review of Critical Issues
This paper reviews LiDAR ground filtering algorithms used in the process of creating Digital Elevation Models. We discuss critical issues for the development and application of LiDAR ground filtering algorithms, including filtering procedures for different feature types, and criteria for study site selection, accuracy assessment, and algorithm classification. This review highlights three feature types for which current ground filtering algorithms are suboptimal, and which can be improved upon in future studies: surfaces with rough terrain or discontinuous slope, dense forest areas that laser beams cannot penetrate, and regions with low vegetation that is often ignored by ground filters
Developing Allometric Equations for Teak Plantations Located in the Coastal Region of Ecuador from Terrestrial Laser Scanning Data
Traditional studies aimed at developing allometric models to estimate dry above-ground biomass (AGB) and other tree-level variables, such as tree stem commercial volume (TSCV) or tree stem volume (TSV), usually involves cutting down the trees. Although this method has low uncertainty, it is quite costly and inefficient since it requires a very time-consuming field work. In order to assist in data collection and processing, remote sensing is allowing the application of non-destructive sampling methods such as that based on terrestrial laser scanning (TLS). In this work, TLS-derived point clouds were used to digitally reconstruct the tree stem of a set of teak trees (Tectona grandis Linn. F.) from 58 circular reference plots of 18 m radius belonging to three different plantations located in the Coastal Region of Ecuador. After manually selecting the appropriate trees from the entire sample, semi-automatic data processing was performed to provide measurements of TSCV and TSV, together with estimates of AGB values at tree level. These observed values were used to develop allometric models, based on diameter at breast height (DBH), total tree height (h), or the metric DBH2 Ă— h, by applying a robust regression method to remove likely outliers. Results showed that the developed allometric models performed reasonably well, especially those based on the metric DBH2 Ă— h, providing low bias estimates and relative RMSE values of 21.60% and 16.41% for TSCV and TSV, respectively. Allometric models only based on tree height were derived from replacing DBH by h in the expression DBH2 x h, according to adjusted expressions depending on DBH classes (ranges of DBH). This finding can facilitate the obtaining of variables such as AGB (carbon stock) and commercial volume of wood over teak plantations in the Coastal Region of Ecuador from only knowing the tree height, constituting a promising method to address large-scale teak plantations monitoring from the canopy height models derived from digital aerial stereophotogrammetry
- …