141 research outputs found
Efficient Autonomous Navigation for Planetary Rovers with Limited Resources
Rovers operating on Mars are in need of more and more autonomous features to ful ll their
challenging mission requirements. However, the inherent constraints of space systems make
the implementation of complex algorithms an expensive and difficult task. In this paper
we propose a control architecture for autonomous navigation. Efficient implementations of
autonomous features are built on top of the current ExoMars navigation method, enhancing
the safety and traversing capabilities of the rover. These features allow the rover to detect
and avoid hazards and perform long traverses by following a roughly safe path planned by
operators on ground. The control architecture implementing the proposed navigation mode
has been tested during a field test campaign on a planetary analogue terrain. The experiments
evaluated the proposed approach, autonomously completing two long traverses while
avoiding hazards. The approach only relies on the optical Localization Cameras stereobench,
a sensor that is found in all rovers launched so far, and potentially allows for computationally
inexpensive long-range autonomous navigation in terrains of medium difficulty
Numerical Efficiency of Inverse Simulation Methods Applied to a Wheeled Rover
Extending the navigational capability of planetary rovers is essential for increasing the scientific outputs from such exploratory missions. In this paper a navigation method based on Inverse Simulation is applied to a four wheel rover. The method calculates the required control inputs to achieve a desired, specified response. Here this is a desired trajectory defined as a series of waypoints. Inverse Simulation considers the complete system dynamics of the rover to calculate the control input using an iterative, numerical Newton - Raphson scheme. The paper provides an insight into the numerical parameters that affect the performance of the method. Also, the influence of varying the timestep and the convergence tolerance is examined in terms of the quality of the calculated control input and the resulting trajectory, as well as the execution time. From this analysis a set of parameters and recommendations to successfully apply Inverse Simulation to a rover is presented
Numerical Stability of Inverse Simulation Algorithms Applied to Planetary Rover Navigation
Extending the navigational capability of planetary rovers is essential for increasing the scientific outputs from such exploratory missions. In this paper a navigation method based on Inverse Simulation is applied to a four wheel rover. The method calculates the required control inputs to achieve a
desired, specified response. Here this is a desired trajectory defined as a series of waypoints. Inverse Simulation considers the complete system dynamics of the rover to calculate the control input using an iterative, numerical Newton – Raphson scheme. The paper provides an insight into the numerical parameters that affect the performance of the method. Also, the influence of varying the timestep and the convergence tolerance is examined in terms of the quality of the calculated control input and the resulting trajectory, as well as the execution time. From this analysis a set of parameters and recommendations to successfully apply Inverse Simulation to a rover is presented
Strategic analysis for the MER Cape Verde approach
The Mars Exploration Rover Opportunity has recently completed a two year campaign studying Victoria Crater. The campaign culminated in a close approach of Cape Verde in order to acquire high resolution imagery of the exposed stratigraphy in the cliff face. The close approach to Cape Verde provided significant challenges for every subsystem of the rover as the rover needed to traverse difficult, un-characterised terrain and approach a cliff face with the potential of blocking out solar energy and communications with Earth. In this paper we describe the strategic analyses performed by the science and engineering teams so that we could successfully achieve the science objectives while keeping the rover safe
NASA-Johnson Space Center Engineering Directorate Overview And L-8 Initiative
Describes the NASA JSC Engineering Directorate's L-8 Initiative, a framework for exploration technology development conducted by the directorate
Testing for the MMX Rover Autonomous Navigation Experiment on Phobos
The MMX rover will explore the surface of Phobos, Mars´ bigger moon. It will use its stereo cameras for perceiving the environment, enabling the use of vision based autonomous navigation algorithms. The German Aerospace Center (DLR) is currently developing the corresponding autonomous navigation experiment that will allow the rover to efficiently explore the
surface of Phobos, despite limited communication with Earth and long turn-around times for operations. This paper discusses our testing strategy regarding the autonomous navigation solution. We present our general testing strategy for the software considering a development approach with agile aspects. We detail, how we ensure successful integration with the rover
system despite having limited access to the flight hardware. We furthermore discuss, what environmental conditions on Phobos pose a potential risk for the navigation algorithms and how we test for these accordingly. Our testing is mostly data set-based and we describe our approaches for recording navigation data that is representative both for the rover system and also for the Phobos environment. Finally, we make the corresponding data
set publicly available and provide an overview on its content
Humanity and Space
Space exploration has provided many benefits to humanity and has the potential to continue delivering technological advancements to society. In this paper, a rationale for human space exploration is presented that includes preserving the human species, developing innovative technologies that are applicable to Earth, and increasing our understanding of the universe. The technical challenges of establishing a Mars colony are evaluated, and solutions are proposed to overcome these obstacles in order to provide recommendations for the future colonization of Mars
Workshop on Advanced Technologies for Planetary Instruments, part 1
This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DoD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments
A Flexible Autonomous Robotic Observatory Infrastructure for Bentho-Pelagic Monitoring
This paper presents the technological developments and the policy contexts for the project “Autonomous Robotic Sea-Floor Infrastructure for Bentho-Pelagic Monitoring” (ARIM). The development is based on the national experience with robotic component technologies that are combined and merged into a new product for autonomous and integrated ecological deep-sea monitoring. Traditional monitoring is often vessel-based and thus resource demanding. It is economically unviable to fulfill the current policy for ecosystem monitoring with traditional approaches. Thus, this project developed platforms for bentho-pelagic monitoring using an arrangement of crawler and stationary platforms at the Lofoten-Vesterålen (LoVe) observatory network (Norway). Visual and acoustic imaging along with standard oceanographic sensors have been combined to support advanced and continuous spatial-temporal monitoring near cold water coral mounds. Just as important is the automatic processing techniques under development that have been implemented to allow species (or categories of species) quantification (i.e., tracking and classification). At the same time, real-time outboard processed three-dimensional (3D) laser scanning has been implemented to increase mission autonomy capability, delivering quantifiable information on habitat features (i.e., for seascape approaches). The first version of platform autonomy has already been tested under controlled conditions with a tethered crawler exploring the vicinity of a cabled stationary instrumented garage. Our vision is that elimination of the tether in combination with inductive battery recharge trough fuel cell technology will facilitate self-sustained long-term autonomous operations over large areas, serving not only the needs of science, but also sub-sea industries like subsea oil and gas, and mining
- …