An IoT Endpoint System-on-Chip for Secure and Energy-Efficient Near-Sensor Analytics

Near-sensor data analytics is a promising direction for IoT endpoints, as it minimizes energy spent on communication and reduces network load - but it also poses security concerns, as valuable data is stored or sent over the network at various stages of the analytics pipeline. Using encryption to protect sensitive data at the boundary of the on-chip analytics engine is a way to address data security issues. To cope with the combined workload of analytics and encryption in a tight power envelope, we propose Fulmine, a System-on-Chip based on a tightly-coupled multi-core cluster augmented with specialized blocks for compute-intensive data processing and encryption functions, supporting software programmability for regular computing tasks. The Fulmine SoC, fabricated in 65nm technology, consumes less than 20mW on average at 0.8V achieving an efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to 25MIPS/mW in software. As a strong argument for real-life flexible application of our platform, we show experimental results for three secure analytics use cases: secure autonomous aerial surveillance with a state-of-the-art deep CNN consuming 3.16pJ per equivalent RISC op; local CNN-based face detection with secured remote recognition in 5.74pJ/op; and seizure detection with encrypted data collection from EEG within 12.7pJ/op.Comment: 15 pages, 12 figures, accepted for publication to the IEEE Transactions on Circuits and Systems - I: Regular Paper

Customisable arithmetic hardware designs

Imperial Users onl

10281 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 11.07.10 to 16.07.10, Dagstuhl Seminar 10281 ``Dynamically Reconfigurable Architectures \u27\u27 was held in Schloss Dagstuhl~--~Leibniz Center for Informatics. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

BEEBS: Open Benchmarks for Energy Measurements on Embedded Platforms

This paper presents and justifies an open benchmark suite named BEEBS, targeted at evaluating the energy consumption of embedded processors. We explore the possible sources of energy consumption, then select individual benchmarks from contemporary suites to cover these areas. Version one of BEEBS is presented here and contains 10 benchmarks that cover a wide range of typical embedded applications. The benchmark suite is portable across diverse architectures and is freely available. The benchmark suite is extensively evaluated, and the properties of its constituent programs are analysed. Using real hardware platforms we show case examples which illustrate the difference in power dissipation between three processor architectures and their related ISAs. We observe significant differences in the average instruction dissipation between the architectures of 4.4x, specifically 170uW/MHz (ARM Cortex-M0), 65uW/MHz (Adapteva Epiphany) and 88uW/MHz (XMOS XS1-L1)

Post-Quantum Secure Architectures for Automotive Hardware Secure Modules

The rapid development of information technology in the automotive industry has driven increasing requirements on incorporating security functionalities in the in-vehicle architecture, which is usually realized by adding a Hardware Secure Module (HSM) in the Electronic Central Unit (ECU). Therefore, secure communications can be enforced by carrying out secret cryptographic computations within the HSM by use of the embedded hardware accelerators. However, there is no common standard for designing the architecture for an automotive HSM. A future design of a common automotive HSM is desired by the automotive industry which not only fits to the increasing performance demand, but also further defends against future attacks by attackers exploiting large-scale quantum computers. The arrival of future quantum computers motivates the investigation into post-quantum cryptography (PQC), which will retain the security of an HSM in the future. We analyzed the candidates in NIST\u27s PQC standardization process, and proposed new sets of hardware accelerators for the future generation of the automotive HSMs. Our evaluation results show that building a post-quantum secure automotive HSM is feasible and can meet the hard requirements imposed by a modern vehicle ECU

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Template-based embedded reconfigurable computing

XIV+212hlm.;24c