3,270 research outputs found
Secrecy performance of TAS/SC-based multi-hop harvest-to-transmit cognitive WSNs under joint constraint of interference and hardware imperfection
In this paper, we evaluate the secrecy performance of multi-hop cognitive wireless sensor networks (WSNs). In the secondary network, a source transmits its data to a destination via the multi-hop relaying model using the transmit antenna selection (TAS)/selection combining (SC) technique at each hop, in the presence of an eavesdropper who wants to receive the data illegally. The secondary transmitters, including the source and intermediate relays, have to harvest energy from radio-frequency signals of a power beacon for transmitting the source data. Moreover, their transmit power must be adjusted to satisfy the quality of service (QoS) of the primary network. Under the joint impact of hardware imperfection and interference constraint, expressions for the transmit power for the secondary transmitters are derived. We also derive exact and asymptotic expressions of secrecy outage probability (SOP) and probability of non-zero secrecy capacity (PNSC) for the proposed protocol over Rayleigh fading channel. The derivations are then verified by Monte Carlo simulations.Web of Science195art. no. 116
Wireless Medical Sensor Networks: Design Requirements and Enabling Technologies
This article analyzes wireless communication protocols that could be used in healthcare environments (e.g., hospitals and small clinics) to transfer real-time medical information obtained from noninvasive sensors. For this purpose the features of the three currently most widely used protocols—namely, Bluetooth® (IEEE 802.15.1), ZigBee (IEEE 802.15.4), and Wi-Fi (IEEE 802.11)—are evaluated and compared. The important features under consideration include data bandwidth, frequency band, maximum transmission distance, encryption and authentication methods, power consumption, and current applications. In addition, an overview of network requirements with respect to medical sensor features, patient safety and patient data privacy, quality of service, and interoperability between other sensors is briefly presented. Sensor power consumption is also discussed because it is considered one of the main obstacles for wider adoption of wireless networks in medical applications. The outcome of this assessment will be a useful tool in the hands of biomedical engineering researchers. It will provide parameters to select the most effective combination of protocols to implement a specific wireless network of noninvasive medical sensors to monitor patients remotely in the hospital or at home
Hybrid-Vehfog: A Robust Approach for Reliable Dissemination of Critical Messages in Connected Vehicles
Vehicular Ad-hoc Networks (VANET) enable efficient communication between
vehicles with the aim of improving road safety. However, the growing number of
vehicles in dense regions and obstacle shadowing regions like Manhattan and
other downtown areas leads to frequent disconnection problems resulting in
disrupted radio wave propagation between vehicles. To address this issue and to
transmit critical messages between vehicles and drones deployed from service
vehicles to overcome road incidents and obstacles, we proposed a hybrid
technique based on fog computing called Hybrid-Vehfog to disseminate messages
in obstacle shadowing regions, and multi-hop technique to disseminate messages
in non-obstacle shadowing regions. Our proposed algorithm dynamically adapts to
changes in an environment and benefits in efficiency with robust drone
deployment capability as needed. Performance of Hybrid-Vehfog is carried out in
Network Simulator (NS-2) and Simulation of Urban Mobility (SUMO) simulators.
The results showed that Hybrid-Vehfog outperformed Cloud-assisted Message
Downlink Dissemination Scheme (CMDS), Cross-Layer Broadcast Protocol (CLBP),
PEer-to-Peer protocol for Allocated REsource (PrEPARE), Fog-Named Data
Networking (NDN) with mobility, and flooding schemes at all vehicle densities
and simulation times
Power Beacon-Assisted Millimeter Wave Ad Hoc Networks
Deployment of low cost power beacons (PBs) is a promising solution for
dedicated wireless power transfer (WPT) in future wireless networks. In this
paper, we present a tractable model for PB-assisted millimeter wave (mmWave)
wireless ad hoc networks, where each transmitter (TX) harvests energy from all
PBs and then uses the harvested energy to transmit information to its desired
receiver. Our model accounts for realistic aspects of WPT and mmWave
transmissions, such as power circuit activation threshold, allowed maximum
harvested power, maximum transmit power, beamforming and blockage. Using
stochastic geometry, we obtain the Laplace transform of the aggregate received
power at the TX to calculate the power coverage probability. We approximate and
discretize the transmit power of each TX into a finite number of discrete power
levels in log scale to compute the channel and total coverage probability. We
compare our analytical predictions to simulations and observe good accuracy.
The proposed model allows insights into effect of system parameters, such as
transmit power of PBs, PB density, main lobe beam-width and power circuit
activation threshold on the overall coverage probability. The results confirm
that it is feasible and safe to power TXs in a mmWave ad hoc network using PBs.Comment: This work has been submitted to the IEEE for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
Physical security with power beacon assisted in half-duplex relaying networks over Rayleigh fading channel: performance analysis
In this research, we proposed and investigated physical security with power beacon assisted in half-duplex relaying networks over a Rayleigh fading channel. In this model, the source (S) node communicates with the destination (D) node via the helping of the intermediate relay (R) node. The D and R nodes harvest energy from the power beacon (PB) node in the presence of a passive eavesdropper (E) node. Then we derived the integral form of the system outage probability (OP) and closed form of the intercept probability (IP). The correctness of the analytical of the OP and IP is verified by the Monte Carlo simulation. The influence of the main system parameters on the OP and IP also is investigated. The research results indicated that the analytical results are the same as the simulation ones
The Dynamics of Vehicular Networks in Urban Environments
Vehicular Ad hoc NETworks (VANETs) have emerged as a platform to support
intelligent inter-vehicle communication and improve traffic safety and
performance. The road-constrained, high mobility of vehicles, their unbounded
power source, and the emergence of roadside wireless infrastructures make
VANETs a challenging research topic. A key to the development of protocols for
inter-vehicle communication and services lies in the knowledge of the
topological characteristics of the VANET communication graph. This paper
explores the dynamics of VANETs in urban environments and investigates the
impact of these findings in the design of VANET routing protocols. Using both
real and realistic mobility traces, we study the networking shape of VANETs
under different transmission and market penetration ranges. Given that a number
of RSUs have to be deployed for disseminating information to vehicles in an
urban area, we also study their impact on vehicular connectivity. Through
extensive simulations we investigate the performance of VANET routing protocols
by exploiting the knowledge of VANET graphs analysis.Comment: Revised our testbed with even more realistic mobility traces. Used
the location of real Wi-Fi hotspots to simulate RSUs in our study. Used a
larger, real mobility trace set, from taxis in Shanghai. Examine the
implications of our findings in the design of VANET routing protocols by
implementing in ns-3 two routing protocols (GPCR & VADD). Updated the
bibliography section with new research work
An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks
Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful
energy awareness is essential when working with these devices.
Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features.
This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols.
The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and
has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference
publications in IEEE Explore and one workshop paper
A Review of the Energy Efficient and Secure Multicast Routing Protocols for Mobile Ad hoc Networks
This paper presents a thorough survey of recent work addressing energy
efficient multicast routing protocols and secure multicast routing protocols in
Mobile Ad hoc Networks (MANETs). There are so many issues and solutions which
witness the need of energy management and security in ad hoc wireless networks.
The objective of a multicast routing protocol for MANETs is to support the
propagation of data from a sender to all the receivers of a multicast group
while trying to use the available bandwidth efficiently in the presence of
frequent topology changes. Multicasting can improve the efficiency of the
wireless link when sending multiple copies of messages by exploiting the
inherent broadcast property of wireless transmission. Secure multicast routing
plays a significant role in MANETs. However, offering energy efficient and
secure multicast routing is a difficult and challenging task. In recent years,
various multicast routing protocols have been proposed for MANETs. These
protocols have distinguishing features and use different mechanismsComment: 15 page
- …