Supporting Cyber-Physical Systems with Wireless Sensor Networks: An Outlook of Software and Services

Sensing, communication, computation and control technologies are the essential building blocks of a cyber-physical system (CPS). Wireless sensor networks (WSNs) are a way to support CPS as they provide fine-grained spatial-temporal sensing, communication and computation at a low premium of cost and power. In this article, we explore the fundamental concepts guiding the design and implementation of WSNs. We report the latest developments in WSN software and services for meeting existing requirements and newer demands; particularly in the areas of: operating system, simulator and emulator, programming abstraction, virtualization, IP-based communication and security, time and location, and network monitoring and management. We also reflect on the ongoing efforts in providing dependable assurances for WSN-driven CPS. Finally, we report on its applicability with a case-study on smart buildings

A Multi-Hop 6LoWPAN Wireless Sensor Network for Waste Management Optimization

In the first part of this Thesis several Wireless Sensor Network technologies, including the ones based on the IEEE 802.15.4 Protocol Standard like ZigBee, 6LoWPAN and Ultra Wide Band, as well as other technologies based on other protocol standards like Z-Wave, Bluetooth and Dash7, are analyzed with respect to relevance and suitability with the Waste Management Outsmart European FP7 Project. A particular attention is given to the parameters which characterize a Large Scale WSN for Smart Cities, due to the amount of sensors involved and to the practical application requested by the project. Secondly, a prototype of sensor network is proposed: an Operative System named Contiki is chosen for its portability on different hardware platforms, its Open Source license, for the use of the 6LoW-PAN protocol and for the implementation of the new RPL routing protocol. The Operative System is described in detail, with a special focus on the uIPv6 TCP/IP stack and RPL implementation. With regard to this innovative routing proto col designed specifically for Low Power Lossy Networks, chapter 4 describes in detail how the network topology is organized as a Directed Acyclic Graph, what is an RPL Instance and how downward and upward routes are constructed and maintained. With the use of several AVR Atmel modules mounting the Contiki OS a real WSN is created and, with an Ultrasonic Sensor, the filling level of a waste basket prototype is periodically detected and transmitted through a multi-hop wireless network to a sink nodeope

Safety and Security oriented design for reliable Industrial IoT applications based on WSNs

[EN] Internet of Things based technologies are enabling the digital transformation in many sectors. However, in order to use this type of solutions, such as wireless sensor networks, in scenarios like transport, industry or smart cities, the deployed networks must meet sensible safety and security requirements. This article describes a Wireless Sensor Network design that applies multi-layered mechanisms and tools to ensure security, safety and reliability while maintaining usability in Rail and Industrial IoT scenarios. The proposed solution provides guidelines for choosing the best implementations given usual restrictions, offering a modular stack so it can be combined with other solutions.This work has been supported by the SCOTT project (Secure COnnected Trustable Things) (www.scottproject.eu), which has received funding from the Electronic Component Systems for European Leadership Joint Undertaking under grant agreement No 737422. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation programme, and from Austria, Spain, Finland, Ireland, Sweden, Germany, Poland, Portugal, Netherlands, Belgium and Norway. It has also been funded by Generalitat Valenciana through the ¿Instituto Valenciano de Competitividad Empresarial ¿ IVACE¿, and by the MCyU (Spanish Ministry of Science and Universities) under the project ATLAS (PGC2018-094151-BI00), which is partially funded by AEI, FEDER and EU.Vera-Pérez, J.; Todoli Ferrandis, D.; Sempere Paya, VM.; Ponce Tortajada, R.; Mujica, G.; Portilla, J. (2019). Safety and Security oriented design for reliable Industrial IoT applications based on WSNs. IEEE. 1774-1781. https://doi.org/10.1109/ETFA.2019.8869204S1774178

Integration of UAVS with Real Time Operating Systems and Establishing a Secure Data Transmission

Indiana University-Purdue University Indianapolis (IUPUI)In today’s world, the applications of Unmanned Aerial Vehicle (UAV) systems are leaping by extending their scope from military applications on to commercial and medical sectors as well. Owing to this commercialization, the need to append external hardware with UAV systems becomes inevitable. This external hardware could aid in enabling wireless data transfer between the UAV system and remote Wireless Sensor Networks (WSN) using low powered architecture like Thread, BLE (Bluetooth Low Energy). The data is being transmitted from the flight controller to the ground control station using a MAVlink (Micro Air Vehicle Link) protocol. But this radio transmission method is not secure, which may lead to data leakage problems. The ideal aim of this research is to address the issues of integrating different hardware with the flight controller of the UAV system using a light-weight protocol called UAVCAN (Unmanned Aerial Vehicle Controller Area Network). This would result in reduced wiring and would harness the problem of integrating multiple systems to UAV. At the same time, data security is addressed by deploying an encryption chip into the UAV system to encrypt the data transfer using ECC (Elliptic curve cryptography) and transmitting it to cloud platforms instead of radio transmission

Experimental evaluation of unicast and multicast CoAP group communication

The Internet of Things (IoT) is expanding rapidly to new domains in which embedded devices play a key role and gradually outnumber traditionally-connected devices. These devices are often constrained in their resources and are thus unable to run standard Internet protocols. The Constrained Application Protocol (CoAP) is a new alternative standard protocol that implements the same principals as the Hypertext Transfer Protocol (HTTP), but is tailored towards constrained devices. In many IoT application domains, devices need to be addressed in groups in addition to being addressable individually. Two main approaches are currently being proposed in the IoT community for CoAP-based group communication. The main difference between the two approaches lies in the underlying communication type: multicast versus unicast. In this article, we experimentally evaluate those two approaches using two wireless sensor testbeds and under different test conditions. We highlight the pros and cons of each of them and propose combining these approaches in a hybrid solution to better suit certain use case requirements. Additionally, we provide a solution for multicast-based group membership management using CoAP

Experimental Evaluation of Unicast and Multicast CoAP Group Communication

The Internet of Things (IoT) is expanding rapidly to new domains in which embedded devices play a key role and gradually outnumber traditionally-connected devices. These devices are often constrained in their resources and are thus unable to run standard Internet protocols. The Constrained Application Protocol (CoAP) is a new alternative standard protocol that implements the same principals as the Hypertext Transfer Protocol (HTTP), but is tailored towards constrained devices. In many IoT application domains, devices need to be addressed in groups in addition to being addressable individually. Two main approaches are currently being proposed in the IoT community for CoAP-based group communication. The main difference between the two approaches lies in the underlying communication type: multicast versus unicast. In this article, we experimentally evaluate those two approaches using two wireless sensor testbeds and under different test conditions. We highlight the pros and cons of each of them and propose combining these approaches in a hybrid solution to better suit certain use case requirements. Additionally, we provide a solution for multicast-based group membership management using CoAP.The research leading to these results has received funding from a VLIRPhD scholarship to Isam Ishaq