Securing route optimisation in NEMO

Third International Symposium on Modeling and Optimization in Mobile, Ad Hoc,and Wireless Networks. 4-6 April 2005. Riva del Garda, Trentino, ItalyThe network mobility (NEMO) basic support protocol enables mobile networks to change their point of attachment to the Internet, while preserving established sessions of the nodes within the mobile network. When only a nonnested mobile network is considered, the so-called triangle routing is the main problem that should be faced. In mobile IPv6, the route optimisation mechanism solves this problem, and the return routability mechanism aims to limit the security concerns originated because of the route optimisation. Nowadays return routability is considered a weak solution (i.e., based on strong assumptions). In this article we explore different approaches to route optimisation in NEMO and we devise how to adapt some of the terminal mobility solutions to a NEMO environment, where, as we propose, a delegation of signalling rights from the mobile network node to the mobile router is necessary.Publicad

Enhancing Capacity and Network Performance of Client-Server Architectures Using Mobile IPv6 Host-Based Network Protocol

A huge number of studies have been done supporting seamless mobility networks and mobile technologies over the years. The recent innovations in technology have unveiled another revolution from the static architectural approach to more dynamic and even mobile approaches for client-server networks. Due to the special equipments and infrastructure needed to support network mobility management, it is difficult to deploy such networks beyond the local network coverage without interruption of communications. Therefore, MIPv6 as developed by the Internet Engineering Task Force (IETF) and ancillary technologies were reviewed to provide clear insights on implementing MIPv6 in Client-Server architectures. However, MIPv6 technology presents weaknesses related to its critical handover latency which appears long for real-time applications such as Video Stream with potential loss of data packets during transmission

A security protocol for authentication of binding updates in Mobile IPv6.

Wireless communication technologies have come along way, improving with every generational leap. As communications evolve so do the system architectures, models and paradigms. Improvements have been seen in the jump from 2G to 3G networks in terms of security. Yet these issues persist and will continue to plague mobile communications into the leap towards 4G networks if not addressed. 4G will be based on the transmission of Internet packets only, using an architecture known as mobile IP. This will feature many advantages, however security is still a fundamental issue to be resolved. One particular security issue involves the route optimisation technique, which deals with binding updates. This allows the corresponding node to by-pass the home agent router to communicate directly with the mobile node. There are a variety of security vulnerabilities with binding updates, which include the interception of data packets, which would allow an attacker to eavesdrop on its contents, breaching the users confidentiality, or to modify transmitted packets for the attackers own malicious purposes. Other possible vulnerabilities with mobile IP include address spoofing, redirection and denial of service attacks. For many of these attacks, all the attacker needs to know is the IPv6 addresses of the mobile’s home agent and the corresponding node. There are a variety of security solutions to prevent these attacks from occurring. Two of the main solutions are cryptography and authentication. Cryptography allows the transmitted data to be scrambled in an undecipherable way resulting in any intercepted packets being illegible to the attacker. Only the party possessing the relevant key will be able to decrypt the message. Authentication is the process of verifying the identity of the user or device one is in communication with. Different authentication architectures exist however many of them rely on a central server to verify the users, resulting in a possible single point of attack. Decentralised authentication mechanisms would be more appropriate for the nature of mobile IP and several protocols are discussed. However they all posses’ flaws, whether they be overly resource intensive or give away vital address data, which can be used to mount an attack. As a result location privacy is investigated in a possible attempt at hiding this sensitive data. Finally, a security solution is proposed to address the security vulnerabilities found in binding updates and attempts to overcome the weaknesses of the examined security solutions. The security protocol proposed in this research involves three new security techniques. The first is a combined solution using Cryptographically Generated Addresses and Return Routability, which are already established solutions, and then introduces a new authentication procedure, to create the Distributed Authentication Protocol to aid with privacy, integrity and authentication. The second is an enhancement to Return Routability called Dual Identity Return Routability, which provides location verification authentication for multiple identities on the same device. The third security technique is called Mobile Home Agents, which provides device and user authentication while introducing location privacy and optimised communication routing. All three security techniques can be used together or individually and each needs to be passed before the binding update is accepted. Cryptographically Generated Addresses asserts the users ownership of the IPv6 address by generating the interface identifier by computing a cryptographic one-way hash function from the users’ public key and auxiliary parameters. The binding between the public key and the address can be verified by recomputing the hash value and by comparing the hash with the interface identifier. This method proves ownership of the address, however it does not prove the address is reachable. After establishing address ownership, Return Routability would then send two security tokens to the mobile node, one directly and one via the home agent. The mobile node would then combine them together to create an encryption key called the binding key allowing the binding update to be sent securely to the correspondent node. This technique provides a validation to the mobile nodes’ location and proves its ownership of the home agent. Return Routability provides a test to verify that the node is reachable. It does not verify that the IPv6 address is owned by the user. This method is combined with Cryptographically Generated Addresses to provide best of both worlds. The third aspect of the first security solution introduces a decentralised authentication mechanism. The correspondent requests the authentication data from both the mobile node and home agent. The mobile sends the data in plain text, which could be encrypted with the binding key and the home agent sends a hash of the data. The correspondent then converts the data so both are hashes and compares them. If they are the same, authentication is successful. This provides device and user authentication which when combined with Cryptographically Generated Addresses and Return Routability create a robust security solution called the Distributed Authentication Protocol. The second new technique was designed to provide an enhancement to a current security solution. Dual Identity Return Routability builds on the concept of Return Routability by providing two Mobile IPv6 addresses on a mobile device, giving the user two separate identities. After establishing address ownership with Cryptographically Generated Addresses, Dual Identity Return Routability would then send security data to both identities, each on a separate network and each having heir own home agents, and the mobile node would then combine them together to create the binding key allowing the binding update to be sent securely to the correspondent node. This technique provides protection against address spoofing as an attacker needs two separate ip addresses, which are linked together. Spoofing only a single address will not pass this security solution. One drawback of the security techniques described, however, is that none of them provide location privacy to hide the users IP address from attackers. An attacker cannot mount a direct attack if the user is invisible. The third new security solution designed is Mobile Home Agents. These are software agents, which provide location privacy to the mobile node by acting as a proxy between it and the network. The Mobile Home Agent resides on the point of attachment and migrates to a new point of attachment at the same time as the mobile node. This provides reduced latency communication and a secure environment for the mobile node. These solutions can be used separately or combined together to form a super security solution, which is demonstrated in this thesis and attempts to provide proof of address ownership, reachability, user and device authentication, location privacy and reduction in communication latency. All these security features are design to protect against one the most devastating attacks in Mobile IPv6, the false binding update, which can allow an attacker to impersonate and deny service to the mobile node by redirecting all data packets to itself. The solutions are all simulated with different scenarios and network configurations and with a variety of attacks, which attempt to send a false binding update to the correspondent node. The results were then collected and analysed to provide conclusive proof that the proposed solutions are effective and robust in protecting against the false binding updates creating a safe and secure network for all

Introducing mobile home agents into the distributed authentication protocol to achieve location privacy in mobile IPv6

Mobile IPv6 will be the basis for the fourth generation 4G networks which will completely revolutionize the way telecommunication devices operate. This paradigm shift will occur due to the sole use of packed switching networks. Mobile IPv6 utilizes binding updates as a route optimization to reduced triangle routing between the mobile node, the home agent and the correspondent node, allowing direct communication between the mobile node and the correspondent. However, direct communication between the nodes produces a range of security vulnerabilities, which the home agent avoided. This paper attempts to provide the advantages of using the home agent as an intermediary whilst reducing the latency of triangle routing. This can be achieved with the proposed use of a mobile home agent which essentially follows the mobile node as it moves between points of attachment providing location privacy and pseudo-direct communication, which can be incorporated into the distributed authentication protocol or be used as a stand alone solution

Seamsar: Seamless And Secure Handover Model For Mobile IPTV Using MIPV6

Multimedia becomes one of the most wanted content in the modern Internet world. Since the Mobile Internet Protocol version 6 (MIPv6) was proposed until today many researchers have been trying to develop methods and protocols, in order to improve the performance of mobile multimedia services. Handover is a transition process when a Mobile Node (MN) moves from home network towards foreign network. This transition causes a latency that affected the data delivery. In mobile multimedia service, extensive latency in data delivery may introduce inconveniences on the user’s side

Enhancing Capacity and Network Performance of Client-Server Architectures Using Mobile IPv6 Host-Based Network Protocol

A huge number of studies have been done supporting seamless mobility networks and mobile technologies over the years The recent innovations in technology have unveiled another revolution from the static architectural approach to more dynamic and even mobile approaches for client-server networks Due to the special equipments and infrastructure needed to support network mobility management it is difficult to deploy such networks beyond the local network coverage without interruption of communications Therefore MIPv6 as developed by the Internet Engineering Task Force IETF and ancillary technologies were reviewed to provide clear insights on implementing MIPv6 in Client-Server architectures However MIPv6 technology presents weaknesses related to its critical handover latency which appears long for real-time applications such as Video Stream with potential loss of data packets during transmissio

Secure Mobile IPv6 for Mobile Networks based on the 3GPP IP Multimedia Subsystem

The rapid spread of new radio access technologies and the consequent service opportunities have stimulated thetechnical and scientific community to investigate future evolution scenarios for 3rd Generation networks (3G), generically referred to as Beyond-3G or 4G. They are going to be characterized by ever stronger requirements for security, as well as the capability for the final users to experience continuous connectivity and uninterrupted services of IP applications as they move about from one access network to another. Key issues are: i) securityprovision for applications exchanging data in diverse wireless networks; ii) seamless mobility (handoff) between different coverage domains and, in case, access technologies. Since many proposals are based on the use of the Mobile IPv6 protocol, in this paper we analyze the security threats emerging from some Mobile IPv6 mechanisms for mobility management, and we propose a solution against such threats, under the assumption that both end users (mobile or not) are attached to a Mobile IPv6-enabled 3GPP IP Multimedia Subsystem network

A Survey on Handover Management in Mobility Architectures

This work presents a comprehensive and structured taxonomy of available techniques for managing the handover process in mobility architectures. Representative works from the existing literature have been divided into appropriate categories, based on their ability to support horizontal handovers, vertical handovers and multihoming. We describe approaches designed to work on the current Internet (i.e. IPv4-based networks), as well as those that have been devised for the "future" Internet (e.g. IPv6-based networks and extensions). Quantitative measures and qualitative indicators are also presented and used to evaluate and compare the examined approaches. This critical review provides some valuable guidelines and suggestions for designing and developing mobility architectures, including some practical expedients (e.g. those required in the current Internet environment), aimed to cope with the presence of NAT/firewalls and to provide support to legacy systems and several communication protocols working at the application layer