Accurate Inverter Error Compensation and Related Self-Commissioning Scheme in Sensorless Induction Motor Drives

This paper presents a technique for accurately identifying and compensating the inverter nonlinear voltage errors that deteriorate the performance of sensorless field-oriented controlled drives at low speed. The inverter model is more accurate than the standard signum-based models that are common in the literature, and the self-identification method is based on the feedback signal of the closed-loop flux observer in dc current steady-state conditions. The inverter model can be identified directly by the digital controller at the drive startup with no extra measures other than the motor phase currents and dc-link voltage. After the commissioning session, the compensation does not require to be tuned furthermore and is robust against temperature detuning. The experimental results, presented here for a rotor-flux-oriented SFOC IM drive for home appliances, demonstrate the feasibility of the proposed solution

Some Permanent Magnet Synchronous Motor (PMSM) Sensorless Control Methods based on Operation Speed Area

This paper compares some sensorless Permanent Magnet Synchronous Motor (PMSM) controls for driving an electric vehicle in terms of operating speed. Sensorless control is a type of control method in which sensors, such as speed and position sensors, are not used to measure controlled variables.  The controlled variable value is estimated from the stator current measurement. Sensorless control performance is not as good as a sensor-based system. This paper aims are to recommend a control method for the PMSM sensorless controls that would be used to drive an electric vehicle. The methods that we will discuss are divided into four categories based on the operation speed area.  They are a startup, low speed, high speed, and low and high-speed areas. The low and high-speed area will be divided into with and without switching.  If PMSM more work at high speed, the most speed area that is used, we prefer to choose the method that works at high speed, that is, the modification or combination of two or more conventional methods

Speed -Sensorless Estimation And Position Control Of Induction Motors For Motion Control Applications

Thesis (Ph.D.) University of Alaska Fairbanks, 2006High performance sensorless position control of induction motors (IMs) calls for estimation and control schemes which offer solutions to parameter uncertainties as well as to difficulties involved with accurate flux and velocity estimation at very low and zero speed. In this thesis, novel control and estimation methods have been developed to address these challenges. The proposed estimation algorithms are designed to minimize estimation error in both transient and steady-state over a wide velocity range, including very low and persistent zero speed operation. To this aim, initially single Extended Kalman Filter (EKF) algorithms are designed to estimate the flux, load torque, and velocity, as well as the rotor, Rr' or stator, Rs resistances. The temperature and frequency related variations of these parameters are well-known challenges in the estimation and control of IMs, and are subject to ongoing research. To further improve estimation and control performance in this thesis, a novel EKF approach is also developed which can achieve the simultaneous estimation of R r' and Rs for the first time in the sensorless IM control literature. The so-called Switching and Braided EKF algorithms are tested through experiments conducted under challenging parameter variations over a wide speed range, including under persistent operation at zero speed. Finally, in this thesis, a sensorless position control method is also designed using a new sliding mode controller (SMC) with reduced chattering. The results obtained with the proposed control and estimation schemes appear to be very compatible and many times superior to existing literature results for sensorless control of IMs in the very low and zero speed range. The developed estimation and control schemes could also be used with a variety of the sensorless speed and position control applications, which are challenged by a high number of parameter uncertainties

Comparative Study of Sensorless Control Methods of PMSM Drives

Recently, permanent magnet synchronous motors (PMSMs) are increasingly used in high performance variable speed drives of many industrial applications. This is because the PMSM has many features, like high efficiency, compactness, high torque to inertia ratio, rapid dynamic response, simple modeling and control, and maintenance-free operation. In most applications, the presence of such a position sensor presents several disadvantages, such as reduced reliability, susceptibility to noise, additional cost and weight and increased complexity of the drive system. For these reasons, the development of alternative indirect methods for speed and position control becomes an important research topic. Many advantages of sensorless control such as reduced hardware complexity, low cost, reduced size, cable elimination, increased noise immunity, increased reliability and decreased maintenance. The key problem in sensorless vector control of ac drives is the accurate dynamic estimation of the stator flux vector over a wide speed range using only terminal variables (currents and voltages). The difficulty comprises state estimation at very low speeds where the fundamental excitation is low and the observer performance tends to be poor. The reasons are the observer sensitivity to model parameter variations, unmodeled nonlinearities and disturbances, limited accuracy of acquisition signals, drifts, and dc offsets. Poor speed estimation at low speed is attributed to data acquisition errors, voltage distortion due the PWM inverter and stator resistance drop which degrading the performance of sensorless drive. Moreover, the noises of system and measurements are considered other main problems. This paper presents a comprehensive study of the different methods of speed and position estimations for sensorless PMSM drives. A deep insight of the advantages and disadvantages of each method is investigated. Furthermore, the difficulties faced sensorless PMSM drives at low speeds as well as the reasons are highly demonstrated. Keywords: permanent magnet, synchronous motor, sensorless control, speed estimation, position estimation, parameter adaptation

Dynamic Performance Analysis of a Five-Phase PMSM Drive Using Model Reference Adaptive System and Enhanced Sliding Mode Observer

This paper aims to evaluate the dynamic performance of a five-phase PMSM drive using two different observers: sliding mode (SMO) and model reference adaptive system (MRAS). The design of the vector control for the drive is firstly introduced in details to visualize the proper selection of speed and current controllers’ gains, then the construction of the two observers are presented. The stability check for the two observers are also presented and analyzed, and finally the evaluation results are presented to visualize the features of each sensorless technique and identify the advantages and shortages as well. The obtained results reveal that the de-signed SMO exhibits better performance and enhanced robustness compared with the MRAS under different operating conditions. This fact is approved through the obtained results considering a mismatch in the values of stator resistance and stator inductance as well. Large deviation in the values of estimated speed and rotor position are observed under MRAS, and this is also accompanied with high speed and torque oscillations

New Hybrid Sensorless Speed of a Non-Salient Pole PMSG Coupled to Wind turbine Using a Modified Switching Algorithm

©2019 ISA. Published by Elsevier Ltd. All rights reserved. his manuscript is made available under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International licence (CC BY-NC-ND 4.0). For further details please see: https://creativecommons.org/licenses/by-nc-nd/4.0/The paper focuses on the design of position and speed observers for the rotor of a non-salient pole permanent magnet synchronous generator (NSPPMSG) coupled to a wind turbine. With the random nature of wind speed this observer is required to provide a position and speed estimates over a wide speed range. The proposed hybrid structure combines two observers and a switching algorithm to select the appropriate observer based on a modified weighting coefficients method. The first observer is a higher-order sliding mode observer (HOSMO) based on modified super twisting algorithm (STA) with correction term and operates in the medium and nominal wind speed ranges. The second observer is used in the low speed range and is based on the rotor flux estimation and the control by injecting a direct reference current different to zero. The stability of each observer has been successfully assessed using an appropriate Lyapunov function. The simulation results obtained show the effectiveness and performance of the proposed observer and control scheme.Peer reviewe

Investigation on SVM-Backstepping sensorless control of five-phase open-end winding induction motor based on model reference adaptive system and parameter estimation

This paper deals with a new control technique applied to five-phase induction motor under open-end stator winding (FPIM-OESW) topology using the backstepping nonlinear control. The main objective is to improve the dynamics of this kind of machine, which is intended to be used in high power industrial application, where the maintenance is difficult and the fault tolerant is needed to ensure the continuous motor operating mode with minimized number of interruption. This control technique is combined with the Space Vector Pulse Width Modulation (SVPWM) to maintain a fixed switching frequency. In addition, the Model Reference Adaptive System (MRAS) concept is used for the estimation of the load torque, the rotor flux and the rotor speed to overcome the main drawbacks presented with the previous sensorless systems concepts. However, the great sensitivity to the changes of the motor internal parameters and it operating instability problems, especially in low-speed operating region, that causes an estimation error of the rotor speed, is the most disadvantage of the MRAS technique. Therefore, to solve this problem, an estimation method of the motor internal parameters such as the rotor resistance, the stator resistance and the magnetizing inductance, is proposed in this paper. Where, the main aim is to improve furthermore the control performance, to reduce the computational complexity and to minimize the rotor speed estimation error. The obtained simulation results confirm the enhanced performance and the clear efficacy of the proposed control technique under a variety of cases of different operating conditions. - 2019 Karabuk UniversityScopu

Advances in Rotating Electric Machines

It is difficult to imagine a modern society without rotating electric machines. Their use has been increasing not only in the traditional fields of application but also in more contemporary fields, including renewable energy conversion systems, electric aircraft, aerospace, electric vehicles, unmanned propulsion systems, robotics, etc. This has contributed to advances in the materials, design methodologies, modeling tools, and manufacturing processes of current electric machines, which are characterized by high compactness, low weight, high power density, high torque density, and high reliability. On the other hand, the growing use of electric machines and drives in more critical applications has pushed forward the research in the area of condition monitoring and fault tolerance, leading to the development of more reliable diagnostic techniques and more fault-tolerant machines. This book presents and disseminates the most recent advances related to the theory, design, modeling, application, control, and condition monitoring of all types of rotating electric machines

Model predictive MRAS estimator for sensorless induction motor drives

Ph. D. ThesisThe project presents a novel model predictive reference adaptive system (MRAS) speed observer for sensorless induction motor drives applications. The proposed observer is based on the finite control set-model predictive control principle. The rotor position is calculated using a search-based optimization algorithm which ensures a minimum speed tuning error signal at each sampling period. This eliminates the need for a proportional integral (PI) controller which is conventionally employed in the adaption mechanism of MRAS observers. Extensive simulation and experimental tests have been carried out to evaluate the performance of the proposed observer. Both the simulation and the experimental results show improved performance of the MRAS scheme in both open and closed-loop sensorless modes of operation at low speeds and with different loading conditions including regeneration. The proposed scheme also improves the system robustness against motor parameter variations and increases the maximum bandwidth of the speed loop controller. However, some of the experimental results show oscillations in the estimated rotor speed, especially at light loading conditions. Furthermore, due to the use of the voltage equation in the reference model, the scheme remains sensitive, to a certain extent, to the variations in the machine parameters. Therefore, to reduce rotor speed oscillations at light loading conditions, an adaptive filter is employed in the speed extraction mechanism, where an adaptation mechanism is proposed to adapt the filter time constant depending on the dynamic state of the system. Furthermore, a voltage compensating method is employed in the reference model of the MP-MRAS observer to address the problems associated with sensitivity to motor parameter variation. The performance of the proposed scheme is evaluated both experimentally and by simulation. Results confirm the effectiveness of the proposed scheme for sensorless speed control of IM drives