Metaheuristic design of feedforward neural networks: a review of two decades of research

Over the past two decades, the feedforward neural network (FNN) optimization has been a key interest among the researchers and practitioners of multiple disciplines. The FNN optimization is often viewed from the various perspectives: the optimization of weights, network architecture, activation nodes, learning parameters, learning environment, etc. Researchers adopted such different viewpoints mainly to improve the FNN's generalization ability. The gradient-descent algorithm such as backpropagation has been widely applied to optimize the FNNs. Its success is evident from the FNN's application to numerous real-world problems. However, due to the limitations of the gradient-based optimization methods, the metaheuristic algorithms including the evolutionary algorithms, swarm intelligence, etc., are still being widely explored by the researchers aiming to obtain generalized FNN for a given problem. This article attempts to summarize a broad spectrum of FNN optimization methodologies including conventional and metaheuristic approaches. This article also tries to connect various research directions emerged out of the FNN optimization practices, such as evolving neural network (NN), cooperative coevolution NN, complex-valued NN, deep learning, extreme learning machine, quantum NN, etc. Additionally, it provides interesting research challenges for future research to cope-up with the present information processing era

State-of-the-art in aerodynamic shape optimisation methods

Aerodynamic optimisation has become an indispensable component for any aerodynamic design over the past 60 years, with applications to aircraft, cars, trains, bridges, wind turbines, internal pipe flows, and cavities, among others, and is thus relevant in many facets of technology. With advancements in computational power, automated design optimisation procedures have become more competent, however, there is an ambiguity and bias throughout the literature with regards to relative performance of optimisation architectures and employed algorithms. This paper provides a well-balanced critical review of the dominant optimisation approaches that have been integrated with aerodynamic theory for the purpose of shape optimisation. A total of 229 papers, published in more than 120 journals and conference proceedings, have been classified into 6 different optimisation algorithm approaches. The material cited includes some of the most well-established authors and publications in the field of aerodynamic optimisation. This paper aims to eliminate bias toward certain algorithms by analysing the limitations, drawbacks, and the benefits of the most utilised optimisation approaches. This review provides comprehensive but straightforward insight for non-specialists and reference detailing the current state for specialist practitioners

A Clustering System for Dynamic Data Streams Based on Metaheuristic Optimisation

open access articleThis article presents the Optimised Stream clustering algorithm (OpStream), a novel approach to cluster dynamic data streams. The proposed system displays desirable features, such as a low number of parameters and good scalability capabilities to both high-dimensional data and numbers of clusters in the dataset, and it is based on a hybrid structure using deterministic clustering methods and stochastic optimisation approaches to optimally centre the clusters. Similar to other state-of-the-art methods available in the literature, it uses “microclusters” and other established techniques, such as density based clustering. Unlike other methods, it makes use of metaheuristic optimisation to maximise performances during the initialisation phase, which precedes the classic online phase. Experimental results show that OpStream outperforms the state-of-the-art methods in several cases, and it is always competitive against other comparison algorithms regardless of the chosen optimisation method. Three variants of OpStream, each coming with a different optimisation algorithm, are presented in this study. A thorough sensitive analysis is performed by using the best variant to point out OpStream’s robustness to noise and resiliency to parameter changes

Chemical and biological reactions of solidification of peat using ordinary portland cement (OPC) and coal ashes

Construction over peat area have often posed a challenge to geotechnical engineers. After decades of study on peat stabilisation techniques, there are still no absolute formulation or guideline that have been established to handle this issue. Some researchers have proposed solidification of peat but a few researchers have also discovered that solidified peat seemed to decrease its strength after a certain period of time. Therefore, understanding the chemical and biological reaction behind the peat solidification is vital to understand the limitation of this treatment technique. In this study, all three types of peat; fabric, hemic and sapric were mixed using Mixing 1 and Mixing 2 formulation which consisted of ordinary Portland cement, fly ash and bottom ash at various ratio. The mixtures of peat-binder-filler were subjected to the unconfined compressive strength (UCS) test, bacterial count test and chemical elemental analysis by using XRF, XRD, FTIR and EDS. Two pattern of strength over curing period were observed. Mixing 1 samples showed a steadily increase in strength over curing period until Day 56 while Mixing 2 showed a decrease in strength pattern at Day 28 and Day 56. Samples which increase in strength steadily have less bacterial count and enzymatic activity with increase quantity of crystallites. Samples with lower strength recorded increase in bacterial count and enzymatic activity with less crystallites. Analysis using XRD showed that pargasite (NaCa2[Mg4Al](Si6Al2)O22(OH)2) was formed in the higher strength samples while in the lower strength samples, pargasite was predicted to be converted into monosodium phosphate and Mg(OH)2 as bacterial consortium was re-activated. The Michaelis�Menten coefficient, Km of the bio-chemical reaction in solidified peat was calculated as 303.60. This showed that reaction which happened during solidification work was inefficient. The kinetics for crystallite formation with enzymatic effect is modelled as 135.42 (1/[S] + 0.44605) which means, when pargasite formed is lower, the amount of enzyme secretes is higher

Can Single Solution Optimisation Methods Be Structurally Biased?

open access articleThis paper investigates whether optimisation methods with the population made up of one solution can suffer from structural bias just like their multisolution variants. Following recent results highlighting the importance of choice of strategy for handling solutions generated outside the domain, a selection of single solution methods are considered in conjunction with several such strategies. Obtained results are tested for the presence of structural bias by means of a traditional approach from literature and a newly proposed here statistical approach. These two tests are demonstrated to be not fully consistent. All tested methods are found to be structurally biased with at least one of the tested strategies. Confirming results for multisolution methods, it is such strategy that is shown to control the emergence of structural bias in single solution methods. Some of the tested methods exhibit a kind of structural bias that has not been observed before

Satisfiability Logic Analysis Via Radial Basis Function Neural Network with Artificial Bee Colony Algorithm

Radial Basis Function Neural Network (RBFNN) is a variant of artificial neural network (ANN) paradigm, utilized in a plethora of fields of studies such as engineering, technology and science. 2 Satisfiability (2SAT) programming has been coined as a prominent logical rule that defines the identity of RBFNN. In this research, a swarm-based searching algorithm namely, the Artificial Bee Colony (ABC) will be introduced to facilitate the training of RBFNN. Worth mentioning that ABC is a new population-based metaheuristics algorithm inspired by the intelligent comportment of the honey bee hives. The optimization pattern in ABC was found fruitful in RBFNN since ABC reduces the complexity of the RBFNN in optimizing important parameters. The effectiveness of ABC in RBFNN has been examined in terms of various performance evaluations. Therefore, the simulation has proved that the ABC complied efficiently in tandem with the Radial Basis Neural Network with 2SAT according to various evaluations such as the Root Mean Square Error (RMSE), Sum of Squares Error (SSE), Mean Absolute Percentage Error (MAPE), and CPU Time. Overall, the experimental results have demonstrated the capability of ABC in enhancing the learning phase of RBFNN-2SAT as compared to the Genetic Algorithm (GA), Differential Evolution (DE) algorithm and Particle Swarm Optimization (PSO) algorithm

Optimizing Weights And Biases in MLP Using Whale Optimization Algorithm

Artificial Neural Networks are intelligent and non-parametric mathematical models inspired by the human nervous system. They have been widely studied and applied for classification, pattern recognition and forecasting problems. The main challenge of training an Artificial Neural network is its learning process, the nonlinear nature and the unknown best set of main controlling parameters (weights and biases). When the Artificial Neural Networks are trained using the conventional training algorithm, they get caught in the local optima stagnation and slow convergence speed; this makes the stochastic optimization algorithm a definitive alternative to alleviate the drawbacks. This thesis proposes an algorithm based on the recently proposed Whale Optimization Algorithm(WOA). The algorithm has proven to solve a wide range of optimization problems and outperform existing algorithms. The successful implementation of this algorithm motivated our attempts to benchmark its performance in training feed-forward neural networks. We have taken a set of 20 datasets with different difficulty levels and tested the proposed WOA-MLP based trainer. Further, the results are verified by comparing WOA-MLP with the back propagation algorithms and six evolutionary techniques. The results have proved that the proposed trainer can outperform the current algorithms on the majority of datasets in terms of local optima avoidance and convergence speed