Space-time-frequency block codes for MIMO-OFDM in next generation wireless systems

In this thesis the use of space-frequency block codes (SFBC) and space-time-frequency block codes (STFBC) in wireless systems are investigated. A variety of SFBC and STFBC schemes are proposed for particular propagation scenarios and system settings where each has its own advantages and disadvantages. The objective is to pro-pose coding strategies with improved flexibility, feasibility and spectral efficiency,and reduce the decoding complexity in an MIMO-OFDM system. Firstly an efficient SFBC with improved system performance is proposed for MIMO-OFDM systems. The proposed SFBC incorporates the concept of matched rotation precoding (MRP) to achieve full transmit diversity and optimal system performance foran arbitrary numberoftransmitantennas,subcarrierinterval andsubcarriergrouping. The MRP is proposed to exploit the inherent rotation and repetition properties of SFBC, arising from the channel power delay profile, in order to fully capture both space and frequency diversity of SFBC in a MIMO-OFDM system. It is able to relax restrictions on subcarrier interval and subcarrier grouping, making it ideal for adaptive/time-varying systems or multiuser systems. The SFBC without an optimization process is unstable in terms of achievable system performance and diversity order, and also risks diversity loss within a specific propagation scenario. Such loss or risk is prominent while wireless propagation channel has a limited number of dominant paths, e.g. relatively close to transmitters or relatively flat topography. Hence in orderto improve the feasibility of SFBC in dynamic scenarios, the lower bound of the coding gain for MRP is derived. The SFBC with MRP is proposed for more practical scenarios when only partial channel power delay profile information is known at the transmit end, for example the wireless channel has dominant propagation paths. The proposed rate one MRP has a relatively simple optimization process that can be transformed into an explicit diagram and hence an optimal result can be derived intuitively without calculations. Next, a multi-rate transmission strategy is proposed for both SFBCand STFBC to balance the system performance and transmission rate. A variety of rate adaptive coding matrices are obtained by a simple truncation of the coding matrix, or by parameter optimization for coding matrices for a given transmission rate and constellation. Pro-posed strategy can easily and gradually adjust the achievable diversity order. As a result it is capable of achieving a relatively smooth balance between system performance and transmission rate in both SFBC and STFBC, without a significant change of coding structure or constellation size. Such tradeoff would be useful to maintain stable Quality of Service (QoS) for users by providing more scalability of achievable performance in a time-varying channel. Finally the decoding procedure of space-time block code (STBC), SFBCand STFBC is discussed. The decoding of all existing STBC/SFBC/STFBC is unified at first, in order to show a concise procedure and make fair comparisons. Then maximum likelihood decoding (MLD) and arbitrary sphere decoding (SD) can be adopted. To reduce the complexity of decoding further, a novel decoding method called compensation de-coding (CD) is presented for a given space-time-frequency coding scheme. By taking advantage of the simplicity of zero-forcing decoding (ZFD) we are able to calculate a compensation vector for the output of ZFD. After modification by utilizing the com-pensation vector, the BER performance can be improved significantly. The decoding procedure is relatively simple and is independent of the constellation size. The per-formance of the proposed decoding method is close to maximum-likelihood decoding for low to medium SNR. A low complexity detection scheme, classifier based decoding (CBD), is further proposed for MIMO systems incorporating spatial multiplexing. The CBD is a hybrid of an equalizer-based technique and an algorithmic search stage. Based on an error matrix and its probability density functions for different classes of error, a particular search region is selected for the algorithmic stage. As the probability of occurrence of error classes with larger search regions is small, overall complexity of the proposed technique remains low, whilst providing a significant improvement in the bit error rate performance

Proactive management of uncertainty to improve scheduling robustness in proces industries

Dinamisme, capacitat de resposta i flexibilitat són característiques essencials en el desenvolupament de la societat actual. Les noves tendències de globalització i els avenços en tecnologies de la informació i comunicació fan que s'evolucioni en un entorn altament dinàmic i incert. La incertesa present en tot procés esdevé un factor crític a l'hora de prendre decisions, així com un repte altament reconegut en l'àrea d'Enginyeria de Sistemes de Procés (PSE). En el context de programació de les operacions, els models de suport a la decisió proposats fins ara, així com també software comercial de planificació i programació d'operacions avançada, es basen generalment en dades estimades, assumint implícitament que el programa d'operacions s'executarà sense desviacions. La reacció davant els efectes de la incertesa en temps d'execució és una pràctica habitual, però no sempre resulta efectiva o factible. L'alternativa és considerar la incertesa de forma proactiva, és a dir, en el moment de prendre decisions, explotant el coneixement disponible en el propi sistema de modelització.Davant aquesta situació es plantegen les següents preguntes: què s'entén per incertesa? Com es pot considerar la incertesa en el problema de programació d'operacions? Què s'entén per robustesa i flexibilitat d'un programa d'operacions? Com es pot millorar aquesta robustesa? Quins beneficis comporta? Aquesta tesi respon a aquestes preguntes en el marc d'anàlisis operacionals en l'àrea de PSE. La incertesa es considera no de la forma reactiva tradicional, sinó amb el desenvolupament de sistemes proactius de suport a la decisió amb l'objectiu d'identificar programes d'operació robustos que serveixin com a referència pel nivell inferior de control de planta, així com també per altres centres en un entorn de cadenes de subministrament. Aquest treball de recerca estableix les bases per formalitzar el concepte de robustesa d'un programa d'operacions de forma sistemàtica. Segons aquest formalisme, els temps d'operació i les ruptures d'equip són considerats inicialment com a principals fonts d'incertesa presents a nivell de programació de la producció. El problema es modelitza mitjançant programació estocàstica, desenvolupant-se finalment un entorn d'optimització basat en simulació que captura les múltiples fonts d'incertesa, així com també estratègies de programació d'operacions reactiva, de forma proactiva. La metodologia desenvolupada en el context de programació de la producció s'estén posteriorment per incloure les operacions de transport en sistemes de múltiples entitats i incertesa en els temps de distribució. Amb aquesta perspectiva més àmplia del nivell d'operació s'estudia la coordinació de les activitats de producció i transport, fins ara centrada en nivells estratègic o tàctic. L'estudi final considera l'efecte de la incertesa en la demanda en les decisions de programació de la producció a curt termini. El problema s'analitza des del punt de vista de gestió del risc, i s'avaluen diferents mesures per controlar l'eficiència del sistema en un entorn incert.En general, la tesi posa de manifest els avantatges en reconèixer i modelitzar la incertesa, amb la identificació de programes d'operació robustos capaços d'adaptar-se a un ampli rang de situacions possibles, enlloc de programes d'operació òptims per un escenari hipotètic. La metodologia proposada a nivell d'operació es pot considerar com un pas inicial per estendre's a nivells de decisió estratègics i tàctics. Alhora, la visió proactiva del problema permet reduir el buit existent entre la teoria i la pràctica industrial, i resulta en un major coneixement del procés, visibilitat per planificar activitats futures, així com també millora l'efectivitat de les tècniques reactives i de tot el sistema en general, característiques altament desitjables per mantenir-se actiu davant la globalitat, competitivitat i dinàmica que envolten un procés.Dynamism, responsiveness, and flexibility are essential features in the development of the current society. Globalization trends and fast advances in communication and information technologies make all evolve in a highly dynamic and uncertain environment. The uncertainty involved in a process system becomes a critical problem in decision making, as well as a recognized challenge in the area of Process Systems Engineering (PSE). In the context of scheduling, decision-support models developed up to this point, as well as commercial advanced planning and scheduling systems, rely generally on estimated input information, implicitly assuming that a schedule will be executed without deviations. The reaction to the effects of the uncertainty at execution time becomes a common practice, but it is not always effective or even possible. The alternative is to address the uncertainty proactively, i.e., at the time of reasoning, exploiting the available knowledge in the modeling procedure itself. In view of this situation, the following questions arise: what do we understand for uncertainty? How can uncertainty be considered within scheduling modeling systems? What is understood for schedule robustness and flexibility? How can schedule robustness be improved? What are the benefits? This thesis answers these questions in the context of operational analysis in PSE. Uncertainty is managed not from the traditional reactive viewpoint, but with the development of proactive decision-support systems aimed at identifying robust schedules that serve as a useful guidance for the lower control level, as well as for dependent entities in a supply chain environment. A basis to formalize the concept of schedule robustness is established. Based on this formalism, variable operation times and equipment breakdowns are first considered as the main uncertainties in short-term production scheduling. The problem is initially modeled using stochastic programming, and a simulation-based stochastic optimization framework is finally developed, which captures the multiple sources of uncertainty, as well as rescheduling strategies, proactively. The procedure-oriented system developed in the context of production scheduling is next extended to involve transport scheduling in multi-site systems with uncertain travel times. With this broader operational perspective, the coordination of production and transport activities, considered so far mainly in strategic and tactical analysis, is assessed. The final research point focuses on the effect of demands uncertainty in short-term scheduling decisions. The problem is analyzed from a risk management viewpoint, and alternative measures are assessed and compared to control the performance of the system in the uncertain environment.Overall, this research work reveals the advantages of recognizing and modeling uncertainty, with the identification of more robust schedules able to adapt to a wide range of possible situations, rather than optimal schedules for a hypothetical scenario. The management of uncertainty proposed from an operational perspective can be considered as a first step towards its extension to tactical and strategic levels of decision. The proactive perspective of the problem results in a more realistic view of the process system, and it is a promising way to reduce the gap between theory and industrial practices. Besides, it provides valuable insight on the process, visibility for future activities, as well as it improves the efficiency of reactive techniques and of the overall system, all highly desirable features to remain alive in the global, competitive, and dynamic process environment

The Four-C Framework for High Capacity Ultra-Low Latency in 5G Networks: A Review

Network latency will be a critical performance metric for the Fifth Generation (5G) networks expected to be fully rolled out in 2020 through the IMT-2020 project. The multi-user multiple-input multiple-output (MU-MIMO) technology is a key enabler for the 5G massive connectivity criterion, especially from the massive densification perspective. Naturally, it appears that 5G MU-MIMO will face a daunting task to achieve an end-to-end 1 ms ultra-low latency budget if traditional network set-ups criteria are strictly adhered to. Moreover, 5G latency will have added dimensions of scalability and flexibility compared to prior existing deployed technologies. The scalability dimension caters for meeting rapid demand as new applications evolve. While flexibility complements the scalability dimension by investigating novel non-stacked protocol architecture. The goal of this review paper is to deploy ultra-low latency reduction framework for 5G communications considering flexibility and scalability. The Four (4) C framework consisting of cost, complexity, cross-layer and computing is hereby analyzed and discussed. The Four (4) C framework discusses several emerging new technologies of software defined network (SDN), network function virtualization (NFV) and fog networking. This review paper will contribute significantly towards the future implementation of flexible and high capacity ultra-low latency 5G communications

Temporal analysis and scheduling of hard real-time radios running on a multi-processor

On a multi-radio baseband system, multiple independent transceivers must share the resources of a multi-processor, while meeting each its own hard real-time requirements. Not all possible combinations of transceivers are known at compile time, so a solution must be found that either allows for independent timing analysis or relies on runtime timing analysis. This thesis proposes a design flow and software architecture that meets these challenges, while enabling features such as independent transceiver compilation and dynamic loading, and taking into account other challenges such as ease of programming, efficiency, and ease of validation. We take data flow as the basic model of computation, as it fits the application domain, and several static variants (such as Single-Rate, Multi-Rate and Cyclo-Static) have been shown to possess strong analytical properties. Traditional temporal analysis of data flow can provide minimum throughput guarantees for a self-timed implementation of data flow. Since transceivers may need to guarantee strictly periodic execution and meet latency requirements, we extend the analysis techniques to show that we can enforce strict periodicity for an actor in the graph; we also provide maximum latency analysis techniques for periodic, sporadic and bursty sources. We propose a scheduling strategy and an automatic scheduling flow that enable the simultaneous execution of multiple transceivers with hard-realtime requirements, described as Single-Rate Data Flow (SRDF) graphs. Each transceiver has its own execution rate and starts and stops independently from other transceivers, at times unknown at compile time, on a multiprocessor. We show how to combine scheduling and mapping decisions with the input application data flow graph to generate a worst-case temporal analysis graph. We propose algorithms to find a mapping per transceiver in the form of clusters of statically-ordered actors, and a budget for either a Time Division Multiplex (TDM) or Non-Preemptive Non-Blocking Round Robin (NPNBRR) scheduler per cluster per transceiver. The budget is computed such that if the platform can provide it, then the desired minimum throughput and maximum latency of the transceiver are guaranteed, while minimizing the required processing resources. We illustrate the use of these techniques to map a combination of WLAN and TDS-CDMA receivers onto a prototype Software-Defined Radio platform. The functionality of transceivers for standards with very dynamic behavior – such as WLAN – cannot be conveniently modeled as an SRDF graph, since SRDF is not capable of expressing variations of actor firing rules depending on the values of input data. Because of this, we propose a restricted, customized data flow model of computation, Mode-Controlled Data Flow (MCDF), that can capture the data-value dependent behavior of a transceiver, while allowing rigorous temporal analysis, and tight resource budgeting. We develop a number of analysis techniques to characterize the temporal behavior of MCDF graphs, in terms of maximum latencies and throughput. We also provide an extension to MCDF of our scheduling strategy for SRDF. The capabilities of MCDF are then illustrated with a WLAN 802.11a receiver model. Having computed budgets for each transceiver, we propose a way to use these budgets for run-time resource mapping and admissibility analysis. During run-time, at transceiver start time, the budget for each cluster of statically-ordered actors is allocated by a resource manager to platform resources. The resource manager enforces strict admission control, to restrict transceivers from interfering with each other’s worst-case temporal behaviors. We propose algorithms adapted from Vector Bin-Packing to enable the mapping at start time of transceivers to the multi-processor architecture, considering also the case where the processors are connected by a network on chip with resource reservation guarantees, in which case we also find routing and resource allocation on the network-on-chip. In our experiments, our resource allocation algorithms can keep 95% of the system resources occupied, while suffering from an allocation failure rate of less than 5%. An implementation of the framework was carried out on a prototype board. We present performance and memory utilization figures for this implementation, as they provide insights into the costs of adopting our approach. It turns out that the scheduling and synchronization overhead for an unoptimized implementation with no hardware support for synchronization of the framework is 16.3% of the cycle budget for a WLAN receiver on an EVP processor at 320 MHz. However, this overhead is less than 1% for mobile standards such as TDS-CDMA or LTE, which have lower rates, and thus larger cycle budgets. Considering that clock speeds will increase and that the synchronization primitives can be optimized to exploit the addressing modes available in the EVP, these results are very promising

Real-time sound synthesis on a multi-processor platform

Real-time sound synthesis means that the calculation and output of each sound sample for a channel of audio information must be completed within a sample period. At a broadcasting standard, a sampling rate of 32,000 Hz, the maximum period available is 31.25 μsec. Such requirements demand a large amount of data processing power. An effective solution for this problem is a multi-processor platform; a parallel and distributed processing system. The suitability of the MIDI [Music Instrument Digital Interface] standard, published in 1983, as a controller for real-time applications is examined. Many musicians have expressed doubts on the decade old standard's ability for real-time performance. These have been investigated by measuring timing in various musical gestures, and by comparing these with the subjective characteristics of human perception. An implementation and its optimisation of real-time additive synthesis programs on a multi-transputer network are described. A prototype 81-polyphonic-note- organ configuration was implemented. By devising and deploying monitoring processes, the network's performance was measured and enhanced, leading to an efficient usage; the 88-note configuration. Since 88 simultaneous notes are rarely necessary in most performances, a scheduling program for dynamic note allocation was then introduced to achieve further efficiency gains. Considering calculation redundancies still further, a multi-sampling rate approach was applied as a further step to achieve an optimal performance. The theories underlining sound granulation, as a means of constructing complex sounds from grains, and the real-time implementation of this technique are outlined. The idea of sound granulation is quite similar to the quantum-wave theory, "acoustic quanta". Despite the conceptual simplicity, the signal processing requirements set tough demands, providing a challenge for this audio synthesis engine. Three issues arising from the results of the implementations above are discussed; the efficiency of the applications implemented, provisions for new processors and an optimal network architecture for sound synthesis

Adaptive Communications for Next Generation Broadband Wireless Access Systems

Un dels aspectes claus en el disseny i gestió de les xarxes sense fils d'accés de banda ampla és l'ús eficient dels recursos radio. Des del punt de vista de l'operador, l'ample de banda és un bé escàs i preuat que s´ha d'explotar i gestionar de la forma més eficient possible tot garantint la qualitat del servei que es vol proporcionar. Per altra banda, des del punt de vista del usuari, la qualitat del servei ofert ha de ser comparable al de les xarxes fixes, requerint així un baix retard i una baixa pèrdua de paquets per cadascun dels fluxos de dades entre la xarxa i l'usuari. Durant els darrers anys s´han desenvolupat nombroses tècniques i algoritmes amb l'objectiu d'incrementar l'eficiència espectral. Entre aquestes tècniques destaca l'ús de múltiples antenes al transmissor i al receptor amb l'objectiu de transmetre diferents fluxos de dades simultaneament sense necessitat d'augmentar l'ample de banda. Per altra banda, la optimizació conjunta de la capa d'accés al medi i la capa física (fent ús de l'estat del canal per tal de gestionar de manera optima els recursos) també permet incrementar sensiblement l'eficiència espectral del sistema.L'objectiu d'aquesta tesi és l'estudi i desenvolupament de noves tècniques d'adaptació de l'enllaç i gestió dels recursos ràdio aplicades sobre sistemes d'accés ràdio de propera generació (Beyond 3G). Els estudis realitzats parteixen de la premissa que el transmisor coneix (parcialment) l'estat del canal i que la transmissió es realitza fent servir un esquema multiportadora amb múltiples antenes al transmisor i al receptor. En aquesta tesi es presenten dues línies d'investigació, la primera per casos d'una sola antenna a cada banda de l'enllaç, i la segona en cas de múltiples antenes. En el cas d'una sola antena al transmissor i al receptor, un nou esquema d'assignació de recursos ràdio i priorització dels paquets (scheduling) és proposat i analitzat integrant totes dues funcions sobre una mateixa entitat (cross-layer). L'esquema proposat té com a principal característica la seva baixa complexitat i que permet operar amb transmissions multimedia. Alhora, posteriors millores realitzades per l'autor sobre l'esquema proposat han permès també reduir els requeriments de senyalització i combinar de forma óptima usuaris d'alta i baixa mobilitat sobre el mateix accés ràdio, millorant encara més l'eficiència espectral del sistema. En cas d'enllaços amb múltiples antenes es proposa un nou esquema que combina la selecció del conjunt optim d'antenes transmissores amb la selecció de la codificació espai- (frequència-) temps. Finalment es donen una sèrie de recomanacions per tal de combinar totes dues línies d'investigació, així con un estat de l'art de les tècniques proposades per altres autors que combinen en part la gestió dels recursos ràdio i els esquemes de transmissió amb múltiples antenes.Uno de los aspectos claves en el diseño y gestión de las redes inalámbricas de banda ancha es el uso eficiente de los recursos radio. Desde el punto de vista del operador, el ancho de banda es un bien escaso y valioso que se debe explotar y gestionar de la forma más eficiente posible sin afectar a la calidad del servicio ofrecido. Por otro lado, desde el punto de vista del usuario, la calidad del servicio ha de ser comparable al ofrecido por las redes fijas, requiriendo así un bajo retardo y una baja tasa de perdida de paquetes para cada uno de los flujos de datos entre la red y el usuario. Durante los últimos años el número de técnicas y algoritmos que tratan de incrementar la eficiencia espectral en dichas redes es bastante amplio. Entre estas técnicas destaca el uso de múltiples antenas en el transmisor y en el receptor con el objetivo de poder transmitir simultáneamente diferentes flujos de datos sin necesidad de incrementar el ancho de banda. Por otro lado, la optimización conjunta de la capa de acceso al medio y la capa física (utilizando información de estado del canal para gestionar de manera óptima los recursos) también permite incrementar sensiblemente la eficiencia espectral del sistema.El objetivo de esta tesis es el estudio y desarrollo de nuevas técnicas de adaptación del enlace y la gestión de los recursos radio, y su posterior aplicación sobre los sistemas de acceso radio de próxima generación (Beyond 3G). Los estudios realizados parten de la premisa de que el transmisor conoce (parcialmente) el estado del canal a la vez que se considera que la transmisión se realiza sobre un sistema de transmisión multiportadora con múltiple antenas en el transmisor y el receptor. La tesis se centra sobre dos líneas de investigación, la primera para casos de una única antena en cada lado del enlace, y la segunda en caso de múltiples antenas en cada lado. Para el caso de una única antena en el transmisor y en el receptor, se ha desarrollado un nuevo esquema de asignación de los recursos radio así como de priorización de los paquetes de datos (scheduling) integrando ambas funciones sobre una misma entidad (cross-layer). El esquema propuesto tiene como principal característica su bajo coste computacional a la vez que se puede aplicar en caso de transmisiones multimedia. Posteriores mejoras realizadas por el autor sobre el esquema propuesto han permitido también reducir los requisitos de señalización así como combinar de forma óptima usuarios de alta y baja movilidad. Por otro lado, en caso de enlaces con múltiples antenas en transmisión y recepción, se presenta un nuevo esquema de adaptación en el cual se combina la selección de la(s) antena(s) transmisora(s) con la selección del esquema de codificación espacio-(frecuencia-) tiempo. Para finalizar, se dan una serie de recomendaciones con el objetivo de combinar ambas líneas de investigación, así como un estado del arte de las técnicas propuestas por otros autores que combinan en parte la gestión de los recursos radio y los esquemas de transmisión con múltiples antenas.In Broadband Wireless Access systems the efficient use of the resources is crucial from many points of views. From the operator point of view, the bandwidth is a scarce, valuable, and expensive resource which must be exploited in an efficient manner while the Quality of Service (QoS) provided to the users is guaranteed. On the other hand, a tight delay and link quality constraints are imposed on each data flow hence the user experiences the same quality as in fixed networks. During the last few years many techniques have been developed in order to increase the spectral efficiency and the throughput. Among them, the use of multiple antennas at the transmitter and the receiver (exploiting spatial multiplexing) with the joint optimization of the medium access control layer and the physical layer parameters.In this Ph.D. thesis, different adaptive techniques for B3G multicarrier wireless systems are developed and proposed focusing on the SS-MC-MA and the OFDM(A) (IEEE 802.16a/e/m standards) communication schemes. The research lines emphasize into the adaptation of the transmission having (Partial) knowledge of the Channel State Information for both; single antenna and multiple antenna links. For single antenna links, the implementation of a joint resource allocation and scheduling strategy by including adaptive modulation and coding is investigated. A low complexity resource allocation and scheduling algorithm is proposed with the objective to cope with real- and/or non-real- time requirements and constraints. A special attention is also devoted in reducing the required signalling. However, for multiple antenna links, the performance of a proposed adaptive transmit antenna selection scheme jointly with space-time block coding selection is investigated and compared with conventional structures. In this research line, mainly two optimizations criteria are proposed for spatial link adaptation, one based on the minimum error rate for fixed throughput, and the second focused on the maximisation of the rate for fixed error rate. Finally, some indications are given on how to include the spatial adaptation into the investigated and proposed resource allocation and scheduling process developed for single antenna transmission

Radio and computing resource management in SDR clouds

The aim of this thesis is defining and developing the concept of an efficient management of radio and computing resources in an SDR cloud. The SDR cloud breaks with today's cellular architecture. A set of distributed antennas are connected by optical fibre to data processing centres. The radio and computing infrastructure can be shared between different operators (virtualization), reducing costs and risks, while increasing the capacity and creating new business models and opportunities. The data centre centralizes the management of all system resources: antennas, spectrum, computing, routing, etc. Specially relevant is the computing resource management (CRM), whose objective is dynamically providing sufficient computing resources for a real-time execution of signal processing algorithms. Current CRM techniques are not designed for wireless applications. We demonstrate that this imposes a limit on the wireless traffic a CRM entity is capable to support. Based on this, a distributed management is proposed, where multiple CRM entities manage a cluster of processors, whose optimal size is derived from the traffic density. Radio resource management techniques (RRM) also need to be adapted to the characteristics of the new SDR cloud architecture. We introduce a linear cost model to measure the cost associated to the infrastructure resources consumed according to the pay-per-use model. Based on this model, we formulate the efficiency maximization power allocation problem (EMPA). The operational costs per transmitted bit achieved by EMPA are 6 times lower than with traditional power allocation methods. Analytical solutions are obtained for the single channel case, with and without channel state information at the transmitter. It is shown that the optimal transmission rate is an increasing function of the product of the channel gain with the operational costs divided by the power costs. The EMPA solution for multiple channels has the form of water-filling, present in many power allocation problems. In order to be able to obtain insights about how the optimal solution behaves as a function of the problem parameters, a novel technique based on ordered statistics has been developed. This technique allows solving general water-filling problems based on the channel statistics rather than their realization. This approach has allowed designing a low complexity EMPA algorithm (2 to 4 orders of magnitude faster than state-of-the-art algorithms). Using the ordered statistics technique, we have shown that the optimal transmission rate behaviour with respect to the average channel gains and cost parameters is equivalent to the single channel case and that the efficiency increases with the number of available channels. The results can be applied to design more efficient SDR clouds. As an example, we have derived the optimal ratio of number of antennas per user that maximizes the efficiency. As new users enter and leave the network, this ratio should be kept constant, enabling and disabling antennas dynamically. This approach exploits the dynamism and elasticity provided by the SDR cloud. In summary, this dissertation aims at influencing towards a change in the communications system management model (typically RRM), considering the introduction of the new infrastructure model (SDR cloud), new business models (based on Cloud Computing) and a more conciliatory view of an efficient resource management, not only focused on the optimization of the spectrum usage.El objetivo de esta tesis es de nir y desarrollar el concepto de gesti on e ciente de los recursos de radio y computaci on en un SDR cloud. El SDR cloud rompe con la estructura del sistema celular actual. Un conjunto de antenas distribuidas se conectan a centros de procesamiento mediante enlaces de comunicaci on de bra optica. La infraestructura de radio y procesamiento puede ser compartida entre distintos operadores (virtualizacion), disminuyendo costes y riesgos, aumentando la capacidad y abriendo nuevos modelos y oportunidades de negocio. La centralizaci on de la gesti on del sistema viene soportada por el centro de procesamiento, donde se realiza una gesti on de todos los recursos del sistema: antenas, espectro, computaci on, enrutado, etc. Resulta de especial relevancia la gesti on de los recursos de computaci on (CRM) cuyo objetivo es el de proveer, din amicamente, de su cientes recursos de computaci on para la ejecuci on en tiempo real de algoritmos de procesado del señal. Las t ecnicas actuales de CRM no han sido diseñadas para aplicaciones de comunicaciones. Demostramos que esta caracter stica impone un l ímite en el tr áfi co que un gestor CRM puede soportar. En base a ello, proponemos una gesti on distribuida donde m ultiples entidades CRM gestionan grupos de procesadores, cuyo tamaño optimo se deriva de la densidad de tr áfi co. Las t ecnicas actuales de gesti on de recursos radio (RRM) tambi en deben ser adaptadas a las caracter sticas de la nueva arquitectura SDR cloud. Introducimos un modelo de coste lineal que caracteriza los costes asociados al consumo de recursos de la infraestructura seg un el modelo de pago-por-uso. A partir de este modelo, formulamos el problema de asignaci on de potencia de m axima e ciencia (EMPA). Mediante una asignaci on EMPA, los costes de operaci on por bit transmitido son del orden de 6 veces menores que con los m etodos tradicionales. Se han obtenido soluciones anal ticas para el caso de un solo canal, con y sin informacion del canal disponible en el transmisor, y se ha demostrado que la velocidad optima de transmisi on es una funci on creciente del producto de la ganancia del canal por los costes operativos dividido entre los costes de potencia. La soluci on EMPA para varios canales satisface el modelo "water- lling", presente en muchos tipos de optimizaci on de potencia. Con el objetivo de conocer c omo esta se comporta en funci on de los par ametros del sistema, se ha desarrollado una t ecnica nueva basada en estadí sticas ordenadas. Esta t ecnica permite solucionar el problema del water- lling bas andose en la estadí stica del canal en vez de en su realizaci on. Este planteamiento, despu es de profundos an alisis matem aticos, ha permitido desarrollar un algoritmo de asignaci on de potencia de baja complejidad (2 a 4 ordenes de magnitud m as r apido que el estado del arte). Mediante esta t ecnica, se ha demostrado que la velocidad optima de transmisi on se comporta de forma equivalente al caso de un solo canal y que la e ciencia incrementa a medida que aumentan el numero de canales disponibles. Estos resultados pueden aplicarse a diseñar un SDR cloud de forma m as e ciente. A modo de ejemplo, hemos obtenido el ratio optimo de n umero de antenas por usuario que maximiza la e ciencia. A medida que los usuarios entran y salen de la red, este ratio debe mantenerse constante, a fin de mantener una efi ciencia lo m as alta posible, activando o desactivando antenas din amicamente. De esta forma se explota completamente el dinamismo ofrecido por una arquitectura el astica como el SDR cloud. En de nitiva, este trabajo pretende incidir en un cambio del modelo de gesti on de un sistema de comunicaciones (t ípicamente RRM) habida cuenta de la introducci on de una nueva infraestructura (SDR cloud), nuevos modelos de negocio (basados en Cloud Computing) y una visi on m as integradora de la gesti on e ciente de los recursos del sistema, no solo centrada en la optimizaci on del uso del espectro