Minimizing Test Power in SRAM through Reduction of Pre-charge Activity

In this paper we analyze the test power of SRAM memories and demonstrate that the full functional pre-charge activity is not necessary during test mode because of the predictable addressing sequence. We exploit this observation in order to minimize power dissipation during test by eliminating the unnecessary power consumption associated with the pre-charge activity. This is achieved through a modified pre-charge control circuitry, exploiting the first degree of freedom of March tests, which allows choosing a specific addressing sequence. The efficiency of the proposed solution is validated through extensive Spice simulations

Low-Capture-Power Test Generation for Scan-Based At-Speed Testing

Scan-based at-speed testing is a key technology to guarantee timing-related test quality in the deep submicron era. However, its applicability is being severely challenged since significant yield loss may occur from circuit malfunction due to excessive IR drop caused by high power dissipation when a test response is captured. This paper addresses this critical problem with a novel low-capture-power X-filling method of assigning 0\u27s and 1\u27s to unspecified (X) bits in a test cube obtained during ATPG. This method reduces the circuit switching activity in capture mode and can be easily incorporated into any test generation flow to achieve capture power reduction without any area, timing, or fault coverage impact. Test vectors generated with this practical method greatly improve the applicability of scan-based at-speed testing by reducing the risk of test yield lossIEEE International Conference on Test, 2005, 8 November 2005, Austin, TX, US

Efficient Test Set Modification for Capture Power Reduction

The occurrence of high switching activity when the response to a test vector is captured by flipflops in scan testing may cause excessive IR drop, resulting in significant test-induced yield loss. This paper addresses the problem with a novel method based on test set modification, featuring (1) a new constrained X-identification technique that turns a properly selected set of bits in a fullyspecified test set into X-bits without fault coverage loss, and (2) a new LCP (low capture power) X-filling technique that optimally assigns 0’s and 1’s to the X-bits for the purpose of reducing the switching activity of the resulting test set in capture mode. This method can be readily applied in any test generation flow for capture power reduction without any impact on area, timing, test set size, and fault coverage

Design of a Scan Chain for Side Channel Attacks on AES Cryptosystem for Improved Security

Scan chain-based attacks are side-channel attacks focusing on one of the most significant features of hardware test circuitry. A technique called Design for Testability (DfT) involves integrating certain testability components into a hardware design. However, this creates a side channel for cryptanalysis, providing crypto devices vulnerable to scan-based attacks. Advanced Encryption Standard (AES) has been proven as the most powerful and secure symmetric encryption algorithm announced by USA Government and it outperforms all other existing cryptographic algorithms. Furthermore, the on-chip implementation of private key algorithms like AES has faced scan-based side-channel attacks. With the aim of protecting the data for secure communication, a new hybrid pipelined AES algorithm with enhanced security features is implemented. This paper proposes testing an AES core with unpredictable response compaction and bit level-masking throughout the scan chain process. A bit-level scan flipflop focused on masking as a scan protection solution for secure testing. The experimental results show that the best security is provided by the randomized addition of masked scan flipflop through the scan chain and also provides minimal design difficulty and power expansion overhead with some negligible delay measures. Thus, the proposed technique outperforms the state-of-the-art LUT-based S-box and the composite sub-byte transformation model regarding throughput rate 2 times and 15 times respectively. And security measured in the avalanche effect for the sub-pipelined model has been increased up to 95 per cent with reduced computational complexity. Also, the proposed sub-pipelined S-box utilizing a composite field arithmetic scheme achieves 7 per cent area effectiveness and 2.5 times the hardware complexity compared to the LUT-based model

A novel scan segmentation design method for avoiding shift timing failure in scan testing

ITC : 2011 IEEE International Test Conference , 20-22 Sep. 2011 , Anaheim, CA, USAHigh power consumption in scan testing can cause undue yield loss which has increasingly become a serious problem for deep-submicron VLSI circuits. Growing evidence attributes this problem to shift timing failures, which are primarily caused by excessive switching activity in the proximities of clock paths that tends to introduce severe clock skew due to IR-drop-induced delay increase. This paper is the first of its kind to address this critical issue with a novel layout-aware scheme based on scan segmentation design, called LCTI-SS (Low-Clock-Tree-Impact Scan Segmentation). An optimal combination of scan segments is identified for simultaneous clocking so that the switching activity in the proximities of clock trees is reduced while maintaining the average power reduction effect on conventional scan segmentation. Experimental results on benchmark and industrial circuits have demonstrated the advantage of the LCTI-SS scheme