Design-for-delay-testability techniques for high-speed digital circuits

The importance of delay faults is enhanced by the ever increasing clock rates and decreasing geometry sizes of nowadays' circuits. This thesis focuses on the development of Design-for-Delay-Testability (DfDT) techniques for high-speed circuits and embedded cores. The rising costs of IC testing and in particular the costs of Automatic Test Equipment are major concerns for the semiconductor industry. To reverse the trend of rising testing costs, DfDT is\ud getting more and more important

Timing error tolerance in nanometer ICs

Abstract—Timing error tolerance turns to be an important design parameter in nanometer technology, high speed and high complexity integrated circuits. In this work, we present a low cost, multiple timing error detection and correction technique, which is based on a new Flip-Flop design. The proposed design approach provides timing error tolerance at the small penalty of one clock cycle delay in the circuit operation for each error correction. In addition, it is characterized by very low silicon area requirements compared to previous design schemes in the open literature. The proposed technique has been applied in a 90nm pipeline design of a digital FIR filter and the simulation results validated its efficiency

Ensuring a High Quality Digital Device through Design for Testability

An electronic device is reliable if it is available for use most of the times throughout its life. The reliability can be affected by mishandling and use under abnormal operating conditions. High quality product cannot be achieved without proper verification and testing during the product development cycle. If the design is difficult to test, then it is very likely that most of the faults will not be detected before it is shipped to the customer. This paper describes how product quality can be improved by making the hardware design testable. Various designs for testability techniqueswere discussed. A three bit counter circuit was used to illustrate the benefits of design for testability by using scan chain methodology

Enhancement and validation of a test technique for integrated circuits

This thesis focuses on a scan-based delay testing technique that was recently developed at ETS. This new approach, called Captureless Delay Testing (CDT), has been proposed as a technique that complements traditional methods of test, ensuring the integrated circuits will function at their proposed clock speed, further improving the test coverage of the particular type of test. Furthermore, CDT incorporates the use of sensors enabling the detection of the presence of transitions at strategic locations. The purpose of this project is to improve on certain aspects of this novel technique. At first, we analyze the delay distribution of the non-covered nodes by traditional methods of test, in order to develop the best way possible of placement of the CDT sensors. We present, using Perl Language, the ensemble of tools developed for this purpose. The end results obtained confirm that the paths that pass through the non-covered nodes are longer than those that traverse the covered ones. The difference between the two types of paths exceeds 20%) of the clock period when considering the shorter path delay values. Secondly, we propose a fially automated algorithm that enables, at the earliest stages of the test vectors generation process: 1) the identification of the non-covered nodes, 2) the identification of the placements of the CDT sensors at the inputs of the flip-flops for further improvement of the test coverage, and 3) the minimization of the number of sensors with regards to requirements. Our results indicate that when we apply CDT on top of transitionbased fault model we can improve the test coverage by 5%. Moreover, the algorithm of CDT sensors minimization allows a reduction of more than 85% the number of those sensors with a minimal test coverage loss, on average of 1.6%

Quantifiable Assurance: From IPs to Platforms

Hardware vulnerabilities are generally considered more difficult to fix than software ones because they are persistent after fabrication. Thus, it is crucial to assess the security and fix the vulnerabilities at earlier design phases, such as Register Transfer Level (RTL) and gate level. The focus of the existing security assessment techniques is mainly twofold. First, they check the security of Intellectual Property (IP) blocks separately. Second, they aim to assess the security against individual threats considering the threats are orthogonal. We argue that IP-level security assessment is not sufficient. Eventually, the IPs are placed in a platform, such as a system-on-chip (SoC), where each IP is surrounded by other IPs connected through glue logic and shared/private buses. Hence, we must develop a methodology to assess the platform-level security by considering both the IP-level security and the impact of the additional parameters introduced during platform integration. Another important factor to consider is that the threats are not always orthogonal. Improving security against one threat may affect the security against other threats. Hence, to build a secure platform, we must first answer the following questions: What additional parameters are introduced during the platform integration? How do we define and characterize the impact of these parameters on security? How do the mitigation techniques of one threat impact others? This paper aims to answer these important questions and proposes techniques for quantifiable assurance by quantitatively estimating and measuring the security of a platform at the pre-silicon stages. We also touch upon the term security optimization and present the challenges for future research directions

Synthesis for circuit reliability

textElectrical and Computer Engineerin

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems