Customisable arithmetic hardware designs

Imperial Users onl

Improving the efficiency of the LDPC code-based McEliece cryptosystem through irregular codes

We consider the framework of the McEliece cryptosystem based on LDPC codes, which is a promising post-quantum alternative to classical public key cryptosystems. The use of LDPC codes in this context allows to achieve good security levels with very compact keys, which is an important advantage over the classical McEliece cryptosystem based on Goppa codes. However, only regular LDPC codes have been considered up to now, while some further improvement can be achieved by using irregular LDPC codes, which are known to achieve better error correction performance than regular LDPC codes. This is shown in this paper, for the first time at our knowledge. The possible use of irregular transformation matrices is also investigated, which further increases the efficiency of the system, especially in regard to the public key size.Comment: 6 pages, 3 figures, presented at ISCC 201

Generalised Mersenne Numbers Revisited

Generalised Mersenne Numbers (GMNs) were defined by Solinas in 1999 and feature in the NIST (FIPS 186-2) and SECG standards for use in elliptic curve cryptography. Their form is such that modular reduction is extremely efficient, thus making them an attractive choice for modular multiplication implementation. However, the issue of residue multiplication efficiency seems to have been overlooked. Asymptotically, using a cyclic rather than a linear convolution, residue multiplication modulo a Mersenne number is twice as fast as integer multiplication; this property does not hold for prime GMNs, unless they are of Mersenne's form. In this work we exploit an alternative generalisation of Mersenne numbers for which an analogue of the above property --- and hence the same efficiency ratio --- holds, even at bitlengths for which schoolbook multiplication is optimal, while also maintaining very efficient reduction. Moreover, our proposed primes are abundant at any bitlength, whereas GMNs are extremely rare. Our multiplication and reduction algorithms can also be easily parallelised, making our arithmetic particularly suitable for hardware implementation. Furthermore, the field representation we propose also naturally protects against side-channel attacks, including timing attacks, simple power analysis and differential power analysis, which is essential in many cryptographic scenarios, in constrast to GMNs.Comment: 32 pages. Accepted to Mathematics of Computatio

Cryptography for Ultra-Low Power Devices

Ubiquitous computing describes the notion that computing devices will be everywhere: clothing, walls and floors of buildings, cars, forests, deserts, etc. Ubiquitous computing is becoming a reality: RFIDs are currently being introduced into the supply chain. Wireless distributed sensor networks (WSN) are already being used to monitor wildlife and to track military targets. Many more applications are being envisioned. For most of these applications some level of security is of utmost importance. Common to WSN and RFIDs are their severely limited power resources, which classify them as ultra-low power devices. Early sensor nodes used simple 8-bit microprocessors to implement basic communication, sensing and computing services. Security was an afterthought. The main power consumer is the RF-transceiver, or radio for short. In the past years specialized hardware for low-data rate and low-power radios has been developed. The new bottleneck are security services which employ computationally intensive cryptographic operations. Customized hardware implementations hold the promise of enabling security for severely power constrained devices. Most research groups are concerned with developing secure wireless communication protocols, others with designing efficient software implementations of cryptographic algorithms. There has not been a comprehensive study on hardware implementations of cryptographic algorithms tailored for ultra-low power applications. The goal of this dissertation is to develop a suite of cryptographic functions for authentication, encryption and integrity that is specifically fashioned to the needs of ultra-low power devices. This dissertation gives an introduction to the specific problems that security engineers face when they try to solve the seemingly contradictory challenge of providing lightweight cryptographic services that can perform on ultra-low power devices and shows an overview of our current work and its future direction

Hardware Architectures for Post-Quantum Cryptography

The rapid development of quantum computers poses severe threats to many commonly-used cryptographic algorithms that are embedded in different hardware devices to ensure the security and privacy of data and communication. Seeking for new solutions that are potentially resistant against attacks from quantum computers, a new research field called Post-Quantum Cryptography (PQC) has emerged, that is, cryptosystems deployed in classical computers conjectured to be secure against attacks utilizing large-scale quantum computers. In order to secure data during storage or communication, and many other applications in the future, this dissertation focuses on the design, implementation, and evaluation of efficient PQC schemes in hardware. Four PQC algorithms, each from a different family, are studied in this dissertation. The first hardware architecture presented in this dissertation is focused on the code-based scheme Classic McEliece. The research presented in this dissertation is the first that builds the hardware architecture for the Classic McEliece cryptosystem. This research successfully demonstrated that complex code-based PQC algorithm can be run efficiently on hardware. Furthermore, this dissertation shows that implementation of this scheme on hardware can be easily tuned to different configurations by implementing support for flexible choices of security parameters as well as configurable hardware performance parameters. The successful prototype of the Classic McEliece scheme on hardware increased confidence in this scheme, and helped Classic McEliece to get recognized as one of seven finalists in the third round of the NIST PQC standardization process. While Classic McEliece serves as a ready-to-use candidate for many high-end applications, PQC solutions are also needed for low-end embedded devices. Embedded devices play an important role in our daily life. Despite their typically constrained resources, these devices require strong security measures to protect them against cyber attacks. Towards securing this type of devices, the second research presented in this dissertation focuses on the hash-based digital signature scheme XMSS. This research is the first that explores and presents practical hardware based XMSS solution for low-end embedded devices. In the design of XMSS hardware, a heterogenous software-hardware co-design approach was adopted, which combined the flexibility of the soft core with the acceleration from the hard core. The practicability and efficiency of the XMSS software-hardware co-design is further demonstrated by providing a hardware prototype on an open-source RISC-V based System-on-a-Chip (SoC) platform. The third research direction covered in this dissertation focuses on lattice-based cryptography, which represents one of the most promising and popular alternatives to today\u27s widely adopted public key solutions. Prior research has presented hardware designs targeting the computing blocks that are necessary for the implementation of lattice-based systems. However, a recurrent issue in most existing designs is that these hardware designs are not fully scalable or parameterized, hence limited to specific cryptographic primitives and security parameter sets. The research presented in this dissertation is the first that develops hardware accelerators that are designed to be fully parameterized to support different lattice-based schemes and parameters. Further, these accelerators are utilized to realize the first software-harware co-design of provably-secure instances of qTESLA, which is a lattice-based digital signature scheme. This dissertation demonstrates that even demanding, provably-secure schemes can be realized efficiently with proper use of software-hardware co-design. The final research presented in this dissertation is focused on the isogeny-based scheme SIKE, which recently made it to the final round of the PQC standardization process. This research shows that hardware accelerators can be designed to offload compute-intensive elliptic curve and isogeny computations to hardware in a versatile fashion. These hardware accelerators are designed to be fully parameterized to support different security parameter sets of SIKE as well as flexible hardware configurations targeting different user applications. This research is the first that presents versatile hardware accelerators for SIKE that can be mapped efficiently to both FPGA and ASIC platforms. Based on these accelerators, an efficient software-hardwareco-design is constructed for speeding up SIKE. In the end, this dissertation demonstrates that, despite being embedded with expensive arithmetic, the isogeny-based SIKE scheme can be run efficiently by exploiting specialized hardware. These four research directions combined demonstrate the practicability of building efficient hardware architectures for complex PQC algorithms. The exploration of efficient PQC solutions for different hardware platforms will eventually help migrate high-end servers and low-end embedded devices towards the post-quantum era

Encrypted control for networked systems -- An illustrative introduction and current challenges

Cloud computing and distributed computing are becoming ubiquitous in many modern control systems such as smart grids, building automation, robot swarms or intelligent transportation systems. Compared to "isolated" control systems, the advantages of cloud-based and distributed control systems are, in particular, resource pooling and outsourcing, rapid scalability, and high performance. However, these capabilities do not come without risks. In fact, the involved communication and processing of sensitive data via public networks and on third-party platforms promote, among other cyberthreats, eavesdropping and manipulation of data. Encrypted control addresses this security gap and provides confidentiality of the processed data in the entire control loop. This paper presents a tutorial-style introduction to this young but emerging field in the framework of secure control for networked dynamical systems.Comment: The paper is a preprint of an accepted paper in the IEEE Control Systems Magazin

Constant weight strings in constant time: a building block for code-based post-quantum cryptosystems

Code based cryptosystems often need to encode either a message or a random bitstring into one of fixed length and fixed (Hamming) weight. The lack of an efficient and reliable bijective map presents a problem in building constructions around the said cryptosystems to attain security against active attackers. We present an efficiently computable, bijective function which yields the desired mapping. Furthermore, we delineate how the said function can be computed in constant time. We experimentally validate the effectiveness and efficiency of our approach, comparing it against the current state of the art solutions, achieving three to four orders of magnitude improvements in computation time, and validate its constant runtim

Efficient NTRU Implementations

In this paper, new software and hardware designs for the NTRU Public Key Cryptosystem are proposed. The first design attempts to improve NTRU\u27s polynomial multiplication through applying techniques from the Chinese Remainder Theorem (CRT) to the convolution algorithm. Although the application of CRT shows promise for the creation of the inverse polynomials in the setup procedure, it does not provide any benefits to the procedures that are critical to the performance of NTRU (public key creation, encryption, and decryption). This research has identified that this is due to the small coefficients of one of the operands, which can be a common misunderstanding. The second design focuses on improving the performance of the polynomial multiplications within NTRU\u27s key creation, encryption, and decryption procedures through hardware. This design exploits the inherent parallelism within a polynomial multiplication to make scalability possible. The advantage scalability provides is that it allows the user to customize the design for low and high power applications. In addition, the support for arbitrary precision allows the user to meet the desired security level. The third design utilizes the Montgomery Multiplication algorithm to develop an unified architecture that can perform a modular multiplication for GF(p) and GF(2^k) and a polynomial multiplication for NTRU. The unified design only requires an additional 10 gates in order for the Montgomery Multiplier core to compute the polynomial multiplication for NTRU. However, this added support for NTRU presents some restrictions on the supported lengths of the moduli and on the chosen value for the residue for the GF(p) and GF(2^k) cases. Despite these restrictions, this unified architecture is now capable of supporting public key operations for the majority of Public-Key Cryptosystems