Adaptive Robot Control - An Experimental Comparison

This paper deals with experimental comparison between stable adaptive controllers of robotic manipulators based on Model Based Adaptive, Neural Network and Wavelet -Based control. The above control methods were compared with each other in terms of computational efficiency, need for accurate mathematical model of the manipulator and tracking performances. An original management algorithm of the Wavelet Network control scheme has been designed, with the aim of constructing the net automatically during the trajectory tracking, without the need to tune it to the trajectory itself. Experimental tests, carried out on a planar two link manipulator, show that the Wavelet-Based control scheme, with the new management algorithm, outperforms the conventional Model-Based schemes in the presence of structural uncertainties in the mathematical model of the robot, without pre-training and more efficiently than the Neural Network approach

A randomized kinodynamic planner for closed-chain robotic systems

Kinodynamic RRT planners are effective tools for finding feasible trajectories in many classes of robotic systems. However, they are hard to apply to systems with closed-kinematic chains, like parallel robots, cooperating arms manipulating an object, or legged robots keeping their feet in contact with the environ- ment. The state space of such systems is an implicitly-defined manifold, which complicates the design of the sampling and steering procedures, and leads to trajectories that drift away from the manifold when standard integration methods are used. To address these issues, this report presents a kinodynamic RRT planner that constructs an atlas of the state space incrementally, and uses this atlas to both generate ran- dom states, and to dynamically steer the system towards such states. The steering method is based on computing linear quadratic regulators from the atlas charts, which greatly increases the planner efficiency in comparison to the standard method that simulates random actions. The atlas also allows the integration of the equations of motion as a differential equation on the state space manifold, which eliminates any drift from such manifold and thus results in accurate trajectories. To the best of our knowledge, this is the first kinodynamic planner that explicitly takes closed kinematic chains into account. We illustrate the performance of the approach in significantly complex tasks, including planar and spatial robots that have to lift or throw a load at a given velocity using torque-limited actuators.Peer ReviewedPreprin

Extended active disturbance rejection controller

Multiple designs, systems, methods and processes for controlling a system or plant using an extended active disturbance rejection control (ADRC) based controller are presented. The extended ADRC controller accepts sensor information from the plant. The sensor information is used in conjunction with an extended state observer in combination with a predictor that estimates and predicts the current state of the plant and a co-joined estimate of the system disturbances and system dynamics. The extended state observer estimates and predictions are used in conjunction with a control law that generates an input to the system based in part on the extended state observer estimates and predictions as well as a desired trajectory for the plant to follow

Model learning for trajectory tracking of robot manipulators

Abstract Model based controllers have drastically improved robot performance, increasing task accuracy while reducing control effort. Nevertheless, all this was realized with a very strong assumption: the exact knowledge of the physical properties of both the robot and the environment that surrounds it. This assertion is often misleading: in fact modern robots are modeled in a very approximate way and, more important, the environment is almost never static and completely known. Also for systems very simple, such as robot manipulators, these assumptions are still too strong and must be relaxed. Many methods were developed which, exploiting previous experiences, are able to refine the nominal model: from classic identification techniques to more modern machine learning based approaches. Indeed, the topic of this thesis is the investigation of these data driven techniques in the context of robot control for trajectory tracking. In the first two chapters, preliminary knowledge is provided on both model based controllers, used in robotics to assure precise trajectory tracking, and model learning techniques. In the following three chapters, are presented the novelties introduced by the author in this context with respect to the state of the art: three works with the same premise (an inaccurate system modeling), an identical goal (accurate trajectory tracking control) but with small differences according to the specific platform of application (fully actuated, underactuated, redundant robots). In all the considered architectures, an online learning scheme has been introduced to correct the nominal feedback linearization control law. Indeed, the method has been primarily introduced in the literature to cope with fully actuated systems, showing its efficacy in the accurate tracking of joint space trajectories also with an inaccurate dynamic model. The main novelty of the technique was the use of only kinematics information, instead of torque measurements (in general very noisy), to online retrieve and compensate the dynamic mismatches. After that the method has been extended to underactuated robots. This new architecture was composed by an online learning correction of the controller, acting on the actuated part of the system (the nominal partial feedback linearization), and an offline planning phase, required to realize a dynamically feasible trajectory also for the zero dynamics of the system. The scheme was iterative: after each trial, according to the collected information, both the phases were improved and then repeated until the task achievement. Also in this case the method showed its capability, both in numerical simulations and on real experiments on a robotics platform. Eventually the method has been applied to redundant systems: differently from before, in this context the task consisted in the accurate tracking of a Cartesian end effector trajectory. In principle very similar to the fully actuated case, the presence of redundancy slowed down drastically the learning machinery convergence, worsening the performance. In order to cope with this, a redundancy resolution was proposed that, exploiting an approximation of the learning algorithm (Gaussian process regression), allowed to locally maximize the information and so select the most convenient self motion for the system; moreover, all of this was realized with just the resolution of a quadratic programming problem. Also in this case the method showed its performance, realizing an accurate online tracking while reducing both the control effort and the joints velocity, obtaining so a natural behaviour. The thesis concludes with summary considerations on the proposed approach and with possible future directions of research

An Asynchronous Simulation Framework for Multi-User Interactive Collaboration: Application to Robot-Assisted Surgery

The field of surgery is continually evolving as there is always room for improvement in the post-operative health of the patient as well as the comfort of the Operating Room (OR) team. While the success of surgery is contingent upon the skills of the surgeon and the OR team, the use of specialized robots has shown to improve surgery-related outcomes in some cases. These outcomes are currently measured using a wide variety of metrics that include patient pain and recovery, surgeon’s comfort, duration of the operation and the cost of the procedure. There is a need for additional research to better understand the optimal criteria for benchmarking surgical performance. Presently, surgeons are trained to perform robot-assisted surgeries using interactive simulators. However, in the absence of well-defined performance standards, these simulators focus primarily on the simulation of the operative scene and not the complexities associated with multiple inputs to a real-world surgical procedure. Because interactive simulators are typically designed for specific robots that perform a small number of tasks controlled by a single user, they are inflexible in terms of their portability to different robots and the inclusion of multiple operators (e.g., nurses, medical assistants). Additionally, while most simulators provide high-quality visuals, simplification techniques are often employed to avoid stability issues for physics computation, contact dynamics and multi-manual interaction. This study addresses the limitations of existing simulators by outlining various specifications required to develop techniques that mimic real-world interactions and collaboration. Moreover, this study focuses on the inclusion of distributed control, shared task allocation and assistive feedback -- through machine learning, secondary and tertiary operators -- alongside the primary human operator

Experiments in Nonlinear Adaptive Control of Multi-Manipulator, Free-Flying Space Robots

Sophisticated robots can greatly enhance the role of humans in space by relieving astronauts of low level, tedious assembly and maintenance chores and allowing them to concentrate on higher level tasks. Robots and astronauts can work together efficiently, as a team; but the robot must be capable of accomplishing complex operations and yet be easy to use. Multiple cooperating manipulators are essential to dexterity and can broaden greatly the types of activities the robot can achieve; adding adaptive control can ease greatly robot usage by allowing the robot to change its own controller actions, without human intervention, in response to changes in its environment. Previous work in the Aerospace Robotics Laboratory (ARL) have shown the usefulness of a space robot with cooperating manipulators. The research presented in this dissertation extends that work by adding adaptive control. To help achieve this high level of robot sophistication, this research made several advances to the field of nonlinear adaptive control of robotic systems. A nonlinear adaptive control algorithm developed originally for control of robots, but requiring joint positions as inputs, was extended here to handle the much more general case of manipulator endpoint-position commands. A new system modelling technique, called system concatenation was developed to simplify the generation of a system model for complicated systems, such as a free-flying multiple-manipulator robot system. Finally, the task-space concept was introduced wherein the operator's inputs specify only the robot's task. The robot's subsequent autonomous performance of each task still involves, of course, endpoint positions and joint configurations as subsets. The combination of these developments resulted in a new adaptive control framework that is capable of continuously providing full adaptation capability to the complex space-robot system in all modes of operation. The new adaptive control algorithm easily handles free-flying systems with multiple, interacting manipulators, and extends naturally to even larger systems. The new adaptive controller was experimentally demonstrated on an ideal testbed in the ARL-A first-ever experimental model of a multi-manipulator, free-flying space robot that is capable of capturing and manipulating free-floating objects without requiring human assistance. A graphical user interface enhanced the robot usability: it enabled an operator situated at a remote location to issue high-level task description commands to the robot, and to monitor robot activities as it then carried out each assignment autonomously

Extended Active Disturbance Rejection Controller

Multiple designs, systems, methods and processes for controlling a system or plant using an extended active disturbance rejection control (ADRC) based controller are presented. The extended ADRC controller accepts sensor information from the plant. The sensor information is used in conjunction with an extended state observer in combination with a predictor that estimates and predicts the current state of the plant and a co-joined estimate of the system disturbances and system dynamics. The extended state observer estimates and predictions are used in conjunction with a control law that generates an input to the system based in part on the extended state observer estimates and predictions as well as a desired trajectory for the plant to follow

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored