Formal Analysis of Arithmetic Circuits using Computer Algebra - Verification, Abstraction and Reverse Engineering

Despite a considerable progress in verification and abstraction of random and control logic, advances in formal verification of arithmetic designs have been lagging. This can be attributed mostly to the difficulty in an efficient modeling of arithmetic circuits and datapaths without resorting to computationally expensive Boolean methods, such as Binary Decision Diagrams (BDDs) and Boolean Satisfiability (SAT), that require “bit blasting”, i.e., flattening the design to a bit-level netlist. Approaches that rely on computer algebra and Satisfiability Modulo Theories (SMT) methods are either too abstract to handle the bit-level nature of arithmetic designs or require solving computationally expensive decision or satisfiability problems. The work proposed in this thesis aims at overcoming the limitations of analyzing arithmetic circuits, specifically at the post-synthesized phase. It addresses the verification, abstraction and reverse engineering problems of arithmetic circuits at an algebraic level, treating an arithmetic circuit and its specification as a properly constructed algebraic system. The proposed technique solves these problems by function extraction, i.e., by deriving arithmetic function computed by the circuit from its low-level circuit implementation using computer algebraic rewriting technique. The proposed techniques work on large integer arithmetic circuits and finite field arithmetic circuits, up to 512-bit wide containing millions of logic gates

Hardware Architectures for Post-Quantum Cryptography

The rapid development of quantum computers poses severe threats to many commonly-used cryptographic algorithms that are embedded in different hardware devices to ensure the security and privacy of data and communication. Seeking for new solutions that are potentially resistant against attacks from quantum computers, a new research field called Post-Quantum Cryptography (PQC) has emerged, that is, cryptosystems deployed in classical computers conjectured to be secure against attacks utilizing large-scale quantum computers. In order to secure data during storage or communication, and many other applications in the future, this dissertation focuses on the design, implementation, and evaluation of efficient PQC schemes in hardware. Four PQC algorithms, each from a different family, are studied in this dissertation. The first hardware architecture presented in this dissertation is focused on the code-based scheme Classic McEliece. The research presented in this dissertation is the first that builds the hardware architecture for the Classic McEliece cryptosystem. This research successfully demonstrated that complex code-based PQC algorithm can be run efficiently on hardware. Furthermore, this dissertation shows that implementation of this scheme on hardware can be easily tuned to different configurations by implementing support for flexible choices of security parameters as well as configurable hardware performance parameters. The successful prototype of the Classic McEliece scheme on hardware increased confidence in this scheme, and helped Classic McEliece to get recognized as one of seven finalists in the third round of the NIST PQC standardization process. While Classic McEliece serves as a ready-to-use candidate for many high-end applications, PQC solutions are also needed for low-end embedded devices. Embedded devices play an important role in our daily life. Despite their typically constrained resources, these devices require strong security measures to protect them against cyber attacks. Towards securing this type of devices, the second research presented in this dissertation focuses on the hash-based digital signature scheme XMSS. This research is the first that explores and presents practical hardware based XMSS solution for low-end embedded devices. In the design of XMSS hardware, a heterogenous software-hardware co-design approach was adopted, which combined the flexibility of the soft core with the acceleration from the hard core. The practicability and efficiency of the XMSS software-hardware co-design is further demonstrated by providing a hardware prototype on an open-source RISC-V based System-on-a-Chip (SoC) platform. The third research direction covered in this dissertation focuses on lattice-based cryptography, which represents one of the most promising and popular alternatives to today\u27s widely adopted public key solutions. Prior research has presented hardware designs targeting the computing blocks that are necessary for the implementation of lattice-based systems. However, a recurrent issue in most existing designs is that these hardware designs are not fully scalable or parameterized, hence limited to specific cryptographic primitives and security parameter sets. The research presented in this dissertation is the first that develops hardware accelerators that are designed to be fully parameterized to support different lattice-based schemes and parameters. Further, these accelerators are utilized to realize the first software-harware co-design of provably-secure instances of qTESLA, which is a lattice-based digital signature scheme. This dissertation demonstrates that even demanding, provably-secure schemes can be realized efficiently with proper use of software-hardware co-design. The final research presented in this dissertation is focused on the isogeny-based scheme SIKE, which recently made it to the final round of the PQC standardization process. This research shows that hardware accelerators can be designed to offload compute-intensive elliptic curve and isogeny computations to hardware in a versatile fashion. These hardware accelerators are designed to be fully parameterized to support different security parameter sets of SIKE as well as flexible hardware configurations targeting different user applications. This research is the first that presents versatile hardware accelerators for SIKE that can be mapped efficiently to both FPGA and ASIC platforms. Based on these accelerators, an efficient software-hardwareco-design is constructed for speeding up SIKE. In the end, this dissertation demonstrates that, despite being embedded with expensive arithmetic, the isogeny-based SIKE scheme can be run efficiently by exploiting specialized hardware. These four research directions combined demonstrate the practicability of building efficient hardware architectures for complex PQC algorithms. The exploration of efficient PQC solutions for different hardware platforms will eventually help migrate high-end servers and low-end embedded devices towards the post-quantum era

The 1992 4th NASA SERC Symposium on VLSI Design

Papers from the fourth annual NASA Symposium on VLSI Design, co-sponsored by the IEEE, are presented. Each year this symposium is organized by the NASA Space Engineering Research Center (SERC) at the University of Idaho and is held in conjunction with a quarterly meeting of the NASA Data System Technology Working Group (DSTWG). One task of the DSTWG is to develop new electronic technologies that will meet next generation electronic data system needs. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The NASA SERC is proud to offer, at its fourth symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories, the electronics industry, and universities. These speakers share insights into next generation advances that will serve as a basis for future VLSI design

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Studies on high-speed hardware implementation of cryptographic algorithms

Cryptographic algorithms are ubiquitous in modern communication systems where they have a central role in ensuring information security. This thesis studies efficient implementation of certain widely-used cryptographic algorithms. Cryptographic algorithms are computationally demanding and software-based implementations are often too slow or power consuming which yields a need for hardware implementation. Field Programmable Gate Arrays (FPGAs) are programmable logic devices which have proven to be highly feasible implementation platforms for cryptographic algorithms because they provide both speed and programmability. Hence, the use of FPGAs for cryptography has been intensively studied in the research community and FPGAs are also the primary implementation platforms in this thesis. This thesis presents techniques allowing faster implementations than existing ones. Such techniques are necessary in order to use high-security cryptographic algorithms in applications requiring high data rates, for example, in heavily loaded network servers. The focus is on Advanced Encryption Standard (AES), the most commonly used secret-key cryptographic algorithm, and Elliptic Curve Cryptography (ECC), public-key cryptographic algorithms which have gained popularity in the recent years and are replacing traditional public-key cryptosystems, such as RSA. Because these algorithms are well-defined and widely-used, the results of this thesis can be directly applied in practice. The contributions of this thesis include improvements to both algorithms and techniques for implementing them. Algorithms are modified in order to make them more suitable for hardware implementation, especially, focusing on increasing parallelism. Several FPGA implementations exploiting these modifications are presented in the thesis including some of the fastest implementations available in the literature. The most important contributions of this thesis relate to ECC and, specifically, to a family of elliptic curves providing faster computations called Koblitz curves. The results of this thesis can, in their part, enable increasing use of cryptographic algorithms in various practical applications where high computation speed is an issue

FourQ on FPGA: New Hardware Speed Records for Elliptic Curve Cryptography over Large Prime Characteristic Fields

We present fast and compact implementations of FourQ (ASIACRYPT 2015) on field-programmable gate arrays (FPGAs), and demonstrate, for the first time, the high efficiency of this new elliptic curve on reconfigurable hardware. By adapting FourQ\u27s algorithms to hardware, we design FPGA-tailored architectures that are significantly faster than any other ECC alternative over large prime characteristic fields. For example, we show that our single-core and multi-core implementations can compute at a rate of 6389 and 64730 scalar multiplications per second, respectively, on a Xilinx Zynq-7020 FPGA, which represent factor-2.5 and 2 speedups in comparison with the corresponding variants of the fastest Curve25519 implementation on the same device. These results show the potential of deploying FourQ on hardware for high-performance and embedded security applications. All the presented implementations exhibit regular, constant-time execution, protecting against timing and simple side-channel attacks

Cryptographic coprocessors for embedded systems

In the field of embedded systems design, coprocessors play an important role as a component to increase performance. Many embedded systems are built around a small General Purpose Processor (GPP). If the GPP cannot meet the performance requirements for a certain operation, a coprocessor can be included in the design. The GPP can then offload the computationally intensive operation to the coprocessor; thus increasing the performance of the overall system. A common application of coprocessors is the acceleration of cryptographic algorithms. The work presented in this thesis discusses coprocessor architectures for various cryptographic algorithms that are found in many cryptographic protocols. Their performance is then analysed on a Field Programmable Gate Array (FPGA) platform. Firstly, the acceleration of Elliptic Curve Cryptography (ECC) algorithms is investigated through the use of instruction set extension of a GPP. The performance of these algorithms in a full hardware implementation is then investigated, and an architecture for the acceleration the ECC based digital signature algorithm is developed. Hash functions are also an important component of a cryptographic system. The FPGA implementation of recent hash function designs from the SHA-3 competition are discussed and a fair comparison methodology for hash functions presented. Many cryptographic protocols involve the generation of random data, for keys or nonces. This requires a True Random Number Generator (TRNG) to be present in the system. Various TRNG designs are discussed and a secure implementation, including post-processing and failure detection, is introduced. Finally, a coprocessor for the acceleration of operations at the protocol level will be discussed, where, a novel aspect of the design is the secure method in which private-key data is handle

Low-complexity, low-area computer architectures for cryptographic application in resource constrained environments

RCE (Resource Constrained Environment) is known for its stringent hardware design requirements. With the rise of Internet of Things (IoT), low-complexity and low-area designs are becoming prominent in the face of complex security threats. Two low-complexity, low-area cryptographic processors based on the ultimate reduced instruction set computer (URISC) are created to provide security features for wireless visual sensor networks (WVSN) by using field-programmable gate array (FPGA) based visual processors typically used in RCEs. The first processor is the Two Instruction Set Computer (TISC) running the Skipjack cipher. To improve security, a Compact Instruction Set Architecture (CISA) processor running the full AES with modified S-Box was created. The modified S-Box achieved a gate count reduction of 23% with no functional compromise compared to Boyar’s. Using the Spartan-3L XC3S1500L-4-FG320 FPGA, the implementation of the TISC occupies 71 slices and 1 block RAM. The TISC achieved a throughput of 46.38 kbps at a stable 24MHz clock. The CISA which occupies 157 slices and 1 block RAM, achieved a throughput of 119.3 kbps at a stable 24MHz clock. The CISA processor is demonstrated in two main applications, the first in a multilevel, multi cipher architecture (MMA) with two modes of operation, (1) by selecting cipher programs (primitives) and sharing crypto-blocks, (2) by using simple authentication, key renewal schemes, and showing perceptual improvements over direct AES on images. The second application demonstrates the use of the CISA processor as part of a selective encryption architecture (SEA) in combination with the millions instructions per second set partitioning in hierarchical trees (MIPS SPIHT) visual processor. The SEA is implemented on a Celoxica RC203 Vertex XC2V3000 FPGA occupying 6251 slices and a visual sensor is used to capture real world images. Four images frames were captured from a camera sensor, compressed, selectively encrypted, and sent over to a PC environment for decryption. The final design emulates a working visual sensor, from on node processing and encryption to back-end data processing on a server computer

NASA SERC 1990 Symposium on VLSI Design

This document contains papers presented at the first annual NASA Symposium on VLSI Design. NASA's involvement in this event demonstrates a need for research and development in high performance computing. High performance computing addresses problems faced by the scientific and industrial communities. High performance computing is needed in: (1) real-time manipulation of large data sets; (2) advanced systems control of spacecraft; (3) digital data transmission, error correction, and image compression; and (4) expert system control of spacecraft. Clearly, a valuable technology in meeting these needs is Very Large Scale Integration (VLSI). This conference addresses the following issues in VLSI design: (1) system architectures; (2) electronics; (3) algorithms; and (4) CAD tools