TFI-FTS: An efficient transient fault injection and fault-tolerant system for asynchronous circuits on FPGA platform

Designing VLSI digital circuits is challenging tasks because of testing the circuits concerning design time. The reliability and productivity of digital integrated circuits are primarily affected by the defects in the manufacturing process or systems. If the defects are more in the systems, which leads the fault in the systems. The fault tolerant systems are necessary to overcome the faults in the VLSI digital circuits. In this research article, an asynchronous circuits based an effective transient fault injection (TFI) and fault tolerant system (FTS) are modelled. The TFI system generates the faults based on BMA based LFSR with faulty logic insertion and one hot encoded register. The BMA based LFSR reduces the hardware complexity with less power consumption on-chip than standard LFSR method. The FTS uses triple mode redundancy (TMR) based majority voter logic (MVL) to tolerant the faults for asynchronous circuits. The benchmarked 74X-series circuits are considered as an asynchronous circuit for TMR logic. The TFI-FTS module is modeled using Verilog-HDL on Xilinx-ISE and synthesized on hardware platform. The Performance parameters are tabulated for TFI-FTS based asynchronous circuits. The performance of TFI-FTS Module is analyzed with 100% fault coverage. The fault coverage is validated using functional simulation of each asynchronous circuit with fault injection in TFI-FTS Module

Cross-layer Soft Error Analysis and Mitigation at Nanoscale Technologies

This thesis addresses the challenge of soft error modeling and mitigation in nansoscale technology nodes and pushes the state-of-the-art forward by proposing novel modeling, analyze and mitigation techniques. The proposed soft error sensitivity analysis platform accurately models both error generation and propagation starting from a technology dependent device level simulations all the way to workload dependent application level analysis

Statistical methods for rapid system evaluation under transient and permanent faults

textTraditional solutions for test and reliability do not scale well for modern designs with their size and complexity increasing with every technology generation. Therefore, in order to meet time-to-market requirements as well as acceptable product quality, it is imperative that new methodologies be developed for quickly evaluating a system in the presence of faults. In this research, statistical methods have been employed and implemented to 1) estimate the stuck-at fault coverage of a test sequence and evaluate the given test vector set without the need for complete fault simulation, and 2) analyze design vulnerabilities in the presence of radiation-based (soft) errors. Experimental results show that these statistical techniques can evaluate a system under test orders of magnitude faster than state-of-the-art methods with a small margin of error. In this dissertation, I have introduced novel methodologies that utilize the information from fault-free simulation and partial fault simulation to predict the fault coverage of a long sequence of test vectors for a design under test. These methodologies are practical for functional testing of complex designs under a long sequence of test vectors. Industry is currently seeking efficient solutions for this challenging problem. The last part of this dissertation discusses a statistical methodology for a detailed vulnerability analysis of systems under soft errors. This methodology works orders of magnitude faster than traditional fault injection. In addition, it is shown that the vulnerability factors calculated by this method are closer to complete fault injection (which is the ideal way of soft error vulnerability analysis), compared to statistical fault injection. Performing such a fast soft error vulnerability analysis is very cruicial for companies that design and build safety-critical systems.Electrical and Computer Engineerin

Partial TMR in FPGAs Using Approximate Logic Circuits

TMR is a very effective technique to mitigate SEU effects in FPGAs, but it is often expensive in terms of FPGA resource utilization and power consumption. For certain applications, Partial TMR can be used to trade off the reliability with the cost of mitigation. In this work we propose a new approach to build Partial TMR circuits for FPGAs using approximate logic circuits. This approach is scalable, with a fine granularity, and can provide a flexible balance between reliability and overheads. The proposed approach has been validated by the results of fault injection experiments and proton irradiation campaigns.This work was supported in part by the Spanish Ministry of Economy and Competitiveness under contract ESP2015-68245-C4-1-P

Study of Single Event Transient Error Mitigation

Single Event Transient (SET) errors in ground-level electronic devices are a growing concern in the radiation hardening field. However, effective SET mitigation technologies which satisfy ground-level demands such as generic, flexible, efficient, and fast, are limited. The classic Triple Modular Redundancy (TMR) method is the most well-known and popular technique in space and nuclear environment. But it leads to more than 200% area and power overheads, which is too costly to implement in ground-level applications. Meanwhile, the coding technique is extensively utilized to inhibit upset errors in storage cells, but the irregularity of combinatorial logics limits its use in SET mitigation. Therefore, SET mitigation techniques suitable for ground-level applications need to be addressed. Aware of the demands for SET mitigation techniques in ground-level applications, this thesis proposes two novel approaches based on the redundant wire and approximate logic techniques. The Redundant Wire is a SET mitigation technique. By selectively adding redundant wire connections, the technique can prohibit targeted transient faults from propagating on the fly. This thesis proposes a set of signature-based evaluation equations to efficiently estimate the protecting effect provided by each redundant wire candidates. Based on the estimated results, a greedy algorithm is used to insert the best candidate repeatedly. Simulation results substantiate that the evaluation equations can achieve up to 98% accuracy on average. Regarding protecting effects, the technique can mask 18.4% of the faults with a 4.3% area, 4.4% power, and 5.4% delay overhead on average. Overall, the quality of protecting results obtained are 2.8 times better than the previous work. Additionally, the impact of synthesis constraints and signature length are discussed. Approximate Logic is a partial TMR technique offering a trade-off between fault coverage and area overheads. The approximate logic consists of an under-approximate logic and an over-approximate logic. The under-approximate logic is a subset of the original min-terms and the over-approximate logic is a subset of the original max-terms. This thesis proposes a new algorithm for generating the two approximate logics. Through the generating process, the algorithm considers the intrinsic failure probabilities of each gate and utilizes a confidence interval estimate equation to minimize required computations. The technique is applied to two fault models, Stuck-at and SET, and the separate results are compared and discussed. The results show that the technique can reduce the error 75% with an area penalty of 46% on some circuits. The delay overheads of this technique are always two additional layers of logic. The two proposed SET mitigation techniques are both applicable to generic combinatorial logics and with high flexibility. The simulation shows promising SET mitigation ability. The proposed mitigation techniques provide designers more choices in developing reliable combinatorial logic in ground-level applications

Autonomous Recovery Of Reconfigurable Logic Devices Using Priority Escalation Of Slack

Field Programmable Gate Array (FPGA) devices offer a suitable platform for survivable hardware architectures in mission-critical systems. In this dissertation, active dynamic redundancy-based fault-handling techniques are proposed which exploit the dynamic partial reconfiguration capability of SRAM-based FPGAs. Self-adaptation is realized by employing reconfiguration in detection, diagnosis, and recovery phases. To extend these concepts to semiconductor aging and process variation in the deep submicron era, resilient adaptable processing systems are sought to maintain quality and throughput requirements despite the vulnerabilities of the underlying computational devices. A new approach to autonomous fault-handling which addresses these goals is developed using only a uniplex hardware arrangement. It operates by observing a health metric to achieve Fault Demotion using Recon- figurable Slack (FaDReS). Here an autonomous fault isolation scheme is employed which neither requires test vectors nor suspends the computational throughput, but instead observes the value of a health metric based on runtime input. The deterministic flow of the fault isolation scheme guarantees success in a bounded number of reconfigurations of the FPGA fabric. FaDReS is then extended to the Priority Using Resource Escalation (PURE) online redundancy scheme which considers fault-isolation latency and throughput trade-offs under a dynamic spare arrangement. While deep-submicron designs introduce new challenges, use of adaptive techniques are seen to provide several promising avenues for improving resilience. The scheme developed is demonstrated by hardware design of various signal processing circuits and their implementation on a Xilinx Virtex-4 FPGA device. These include a Discrete Cosine Transform (DCT) core, Motion Estimation (ME) engine, Finite Impulse Response (FIR) Filter, Support Vector Machine (SVM), and Advanced Encryption Standard (AES) blocks in addition to MCNC benchmark circuits. A iii significant reduction in power consumption is achieved ranging from 83% for low motion-activity scenes to 12.5% for high motion activity video scenes in a novel ME engine configuration. For a typical benchmark video sequence, PURE is shown to maintain a PSNR baseline near 32dB. The diagnosability, reconfiguration latency, and resource overhead of each approach is analyzed. Compared to previous alternatives, PURE maintains a PSNR within a difference of 4.02dB to 6.67dB from the fault-free baseline by escalating healthy resources to higher-priority signal processing functions. The results indicate the benefits of priority-aware resiliency over conventional redundancy approaches in terms of fault-recovery, power consumption, and resource-area requirements. Together, these provide a broad range of strategies to achieve autonomous recovery of reconfigurable logic devices under a variety of constraints, operating conditions, and optimization criteria

Error Mitigation Using Approximate Logic Circuits: A Comparison of Probabilistic and Evolutionary Approaches

Technology scaling poses an increasing challenge to the reliability of digital circuits. Hardware redundancy solutions, such as triple modular redundancy (TMR), produce very high area overhead, so partial redundancy is often used to reduce the overheads. Approximate logic circuits provide a general framework for optimized mitigation of errors arising from a broad class of failure mechanisms, including transient, intermittent, and permanent failures. However, generating an optimal redundant logic circuit that is able to mask the faults with the highest probability while minimizing the area overheads is a challenging problem. In this study, we propose and compare two new approaches to generate approximate logic circuits to be used in a TMR schema. The probabilistic approach approximates a circuit in a greedy manner based on a probabilistic estimation of the error. The evolutionary approach can provide radically different solutions that are hard to reach by other methods. By combining these two approaches, the solution space can be explored in depth. Experimental results demonstrate that the evolutionary approach can produce better solutions, but the probabilistic approach is close. On the other hand, these approaches provide much better scalability than other existing partial redundancy techniques.This work was supported by the Ministry of Economy and Competitiveness of Spain under project ESP2015-68245-C4-1-P, and by the Czech science foundation project GA16-17538S and the Ministry of Education, Youth and Sports of the Czech Republic from the National Programme of Sustainability (NPU II); project IT4Innovations excellence in science - LQ1602

Fast and accurate SER estimation for large combinational blocks in early stages of the design

Soft Error Rate (SER) estimation is an important challenge for integrated circuits because of the increased vulnerability brought by technology scaling. This paper presents a methodology to estimate in early stages of the design the susceptibility of combinational circuits to particle strikes. In the core of the framework lies MASkIt , a novel approach that combines signal probabilities with technology characterization to swiftly compute the logical, electrical, and timing masking effects of the circuit under study taking into account all input combinations and pulse widths at once. Signal probabilities are estimated applying a new hybrid approach that integrates heuristics along with selective simulation of reconvergent subnetworks. The experimental results validate our proposed technique, showing a speedup of two orders of magnitude in comparison with traditional fault injection estimation with an average estimation error of 5 percent. Finally, we analyze the vulnerability of the Decoder, Scheduler, ALU, and FPU of an out-of-order, superscalar processor design.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness and Feder Funds under grant TIN2013-44375-R, by the Generalitat de Catalunya under grant FI-DGR 2016, and by the FP7 program of the EU under contract FP7-611404 (CLERECO).Peer ReviewedPostprint (author's final draft