Performance Evaluation of a Self-Organising Scheme for Multi-Radio Wireless Mesh Networks

Multi-Radio Wireless Mesh Networks (MR-WMN) can substantially increase the aggregate capacity of the Wireless Mesh Networks (WMN) if the channels are assigned to the nodes in an intelligent way so that the overall interference is limited. We propose a generic self-organisation algorithm that addresses the two key challenges of scalability and stability in a WMN. The basic approach is that of a distributed, light-weight, co-operative multiagent system that guarantees scalability. The usefulness of our algorithm is exhibited by the performance evaluation results that are presented for different MR-WMN node densities and typical topologies. In addition, our work complements the Task Group 802.11s Extended Service Set (ESS) Mesh networking project work that is in progress

Performance Analysis of On-Demand Routing Protocols in Wireless Mesh Networks

Wireless Mesh Networks (WMNs) have recently gained a lot of popularity due to their rapid deployment and instant communication capabilities. WMNs are dynamically self-organizing, self-configuring and self-healing with the nodes in the network automatically establishing an adiej hoc network and preserving the mesh connectivity. Designing a routing protocol for WMNs requires several aspects to consider, such as wireless networks, fixed applications, mobile applications, scalability, better performance metrics, efficient routing within infrastructure, load balancing, throughput enhancement, interference, robustness etc. To support communication, various routing protocols are designed for various networks (e.g. ad hoc, sensor, wired etc.). However, all these protocols are not suitable for WMNs, because of the architectural differences among the networks. In this paper, a detailed simulation based performance study and analysis is performed on the reactive routing protocols to verify the suitability of these protocols over such kind of networks. Ad Hoc On-Demand Distance Vector (AODV), Dynamic Source Routing (DSR) and Dynamic MANET On-demand (DYMO) routing protocol are considered as the representative of reactive routing protocols. The performance differentials are investigated using varying traffic load and number of source. Based on the simulation results, how the performance of each protocol can be improved is also recommended.Wireless Mesh Networks (WMNs), IEEE 802.11s, AODV, DSR, DYMO

Clustered Multi-layer Multi-protocol Wireless Mesh Networks

Wireless Mesh Networks (WMNs) have emerged as an alternative option to the wired networks in areas where wired deployment is unfeasible and/or costly. They have been widely adopted in community networks as these networks are mostly built within “not for profit” projects and do not require enterprise class investment which can lead to inefficient network architectures and routing protocol designs. B.A.T.M.A.N-ADV has been designed as a simple routing protocol that adheres to lightweight equipment requirements of wireless mesh deployment in the rural areas of the developing countries. However, it is built around a flat WMN topology which is challenged with scalability, security and implementation issues; which can limit WMN growth and services expansion. This paper proposes and evaluates the performance of a new multi-layer, multi-protocol WMN architecture that addresses B.A.T.M.A.N-ADV scalability issues by borrowing from wired networks their clustering model and building around the B.A.T.M.A.N Experimental (BMX6) protocol to introduce layer2 tunnelling through a cloud of layer3 routers.Telkom, Cisco, Aria Technologies, THRIPDepartment of HE and Training approved lis

Efficient Cooperative Anycasting for AMI Mesh Networks

We have, in recent years, witnessed an increased interest towards enabling a Smart Grid which will be a corner stone to build sustainable energy efficient communities. An integral part of the future Smart Grid will be the communications infrastructure which will make real time control of the grid components possible. Automated Metering Infrastructure (AMI) is thought to be a key enabler for monitoring and controlling the customer loads. %RPL is a connectivity enabling mechanism for low power and lossy networks currently being standardized by the IETF ROLL working group. RPL is deemed to be a suitable candidate for AMI networks where the meters are connected to a concentrator over multi hop low power and lossy links. This paper proposes an efficient cooperative anycasting approach for wireless mesh networks with the aim of achieving reduced traffic and increased utilisation of the network resources. The proposed cooperative anycasting has been realised as an enhancement on top of the Routing Protocol for Low Power and Lossy Networks (RPL), a connectivity enabling mechanism in wireless AMI mesh networks. In this protocol, smart meter nodes utilise an anycasting approach to facilitate efficient transport of metering data to the concentrator node. Moreover, it takes advantage of a distributed approach ensuring scalability

Voice and rural wireless mesh community networks: a framework to quantify scalability and manage end-user smartphone battery consumption

Philosophiae Doctor - PhDCommunity wireless mesh initiatives are a pioneering option to cheap ‘last-mile’ access to network services for rural low-income regions primarily located in Sub-Saharan Africa and Developing Asia. However, researchers have criticized wireless mesh networks for their poor scalability; and scalability quantification research has mostly consisted of modularization of per-node throughput capacity behaviour. A scalability quantification model to design wireless mesh networks to provide adequate quality of service is lacking. However, scalability quantification of community mesh networks alone is inadequate because rural users need affordable devices for access; and they need to know how best to use them. Low-cost low-end smartphones offer handset affordability solutions but require smart management of their small capacity battery. Related work supports the usage of Wi-Fi for communication because it is shown to consume less battery than 2G, 3G or Bluetooth. However, a model to compare Wi-Fi battery consumption amongst different low-end smartphones is missing, as is a comparison of different over-the-top communication applications

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

Survey on wireless technology trade-offs for the industrial internet of things

Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment

Achieving Scalable Capacity in Wireless Mesh Networks

Wireless mesh networks play a critical role in enabling key networking scenarios in beyond-5G (B5G) and 6G networks, including integrated access and backhaul (IAB), multi-hop sidelinks, and V2X. However, it still poses a challenge to deliver scalable per-node throughput via mesh networking, which significantly limits the potential of large-scale deployment of wireless mesh networks. Existing research has achieved $O(1)$ per-node throughput in a dense network, but how to achieve scalability remains an unresolved issue for an extended wireless network where the network size increases with a constant node density. This issue prevents a wireless mesh network from large-scale deployment. To this end, this paper aims to develop a theoretical approach to achieving scalable per-node throughput in wireless mesh networks. First, the key factors that limit the per-node throughput of wireless mesh networks are analyzed, through which two major ones are identified, i.e., link sharing and interference. Next, a multi-tier hierarchical architecture is proposed to overcome the link-sharing issue. The inter-tier interference under this architecture is then mitigated by utilizing orthogonal frequency allocation between adjacent tiers, while the intra-tier interference is reduced by considering two specific transmission schemes, one is MIMO spatial multiplexing with time-division, the other is MIMO beamforming. Theoretical analysis shows that the multi-tier mesh networking architecture can achieve a per-node throughput of $\Theta(1)$ in both schemes, as long as certain conditions on network parameters including bandwidth, antenna numbers, and node numbers of each tier are satisfied. A case study on a realistic deployment of 10,000 nodes is then carried out, which demonstrates that a scalable throughput of $\Theta(1)$ is achievable with a reasonable assumption on bandwidth and antenna numbers.Comment: ~12pages, 4 figures, submitted to IEEE TIT, part of this work has been published in IEEE MASS 202