Shrunken Locally Linear Embedding for Passive Microwave Retrieval of Precipitation

This paper introduces a new Bayesian approach to the inverse problem of passive microwave rainfall retrieval. The proposed methodology relies on a regularization technique and makes use of two joint dictionaries of coincidental rainfall profiles and their corresponding upwelling spectral radiative fluxes. A sequential detection-estimation strategy is adopted, which basically assumes that similar rainfall intensity values and their spectral radiances live close to some sufficiently smooth manifolds with analogous local geometry. The detection step employs a nearest neighborhood classification rule, while the estimation scheme is equipped with a constrained shrinkage estimator to ensure stability of retrieval and some physical consistency. The algorithm is examined using coincidental observations of the active precipitation radar (PR) and passive microwave imager (TMI) on board the Tropical Rainfall Measuring Mission (TRMM) satellite. We present promising results of instantaneous rainfall retrieval for some tropical storms and mesoscale convective systems over ocean, land, and coastal zones. We provide evidence that the algorithm is capable of properly capturing different storm morphologies including high intensity rain-cells and trailing light rainfall, especially over land and coastal areas. The algorithm is also validated at an annual scale for calendar year 2013 versus the standard (version 7) radar (2A25) and radiometer (2A12) rainfall products of the TRMM satellite

Evaluating the utility of multispectral information in delineating the areal extent of precipitation

Data from geosynchronous Earth-orbiting (GEO) satellites equipped with visible (VIS) and infrared (IR) scanners are commonly used in rain retrieval algorithms. These algorithms benefit from the high spatial and temporal resolution of GEO observations, either in stand-alone mode or in combination with higher-quality but less frequent microwave observations from low Earth-orbiting (LEO) satellites. In this paper, a neural network-based framework is presented to evaluate the utility of multispectral information in improving rain/no-rain (R/NR) detection. The algorithm uses the powerful classification features of the self-organizing feature map (SOFM), along with probability matching techniques to map single- or multispectral input space into R/NR maps. The framework was tested and validated using the 31 possible combinations of the five Geostationary Operational Environmental Satellite 12 (GOES-12) channels. An algorithm training and validation study was conducted over the conterminous United States during June-August 2006. The results indicate that during daytime, the visible channel (0.65 μm) can yield significant improvements in R/NR detection capabilities, especially when combined with any of the other four GOES-12 channels. Similarly, for nighttime detection the combination of two IR channels - particularly channels 3 (6.5 μm) and 4 (10.7 μm)-resulted in significant performance gain over any single IR channel. In both cases, however, using more than two channels resulted only in marginal improvements over two-channel combinations. Detailed examination of event-based images indicate that the proposed algorithm is capable of extracting information useful to screen no-rain pixels associated with cold, thin clouds and identifying rain areas under warm but rainy clouds. Both cases have been problematic areas for IR-only algorithms. © 2009 American Meteorological Society

Delineation of high resolution climate regions over the Korean Peninsula using machine learning approaches

In this research, climate classification maps over the Korean Peninsula at 1 km resolution were generated using the satellite-based climatic variables of monthly temperature and precipitation based on machine learning approaches. Random forest (RF), artificial neural networks (ANN), k-nearest neighbor (KNN), logistic regression (LR), and support vector machines (SVM) were used to develop models. Training and validation of these models were conducted using in-situ observations from the Korea Meteorological Administration (KMA) from 2001 to 2016. The rule of the traditional Koppen-Geiger (K-G) climate classification was used to classify climate regions. The input variables were land surface temperature (LST) of the Moderate Resolution Imaging Spectroradiometer (MODIS), monthly precipitation data from the Tropical Rainfall Measuring Mission (TRMM) 3B43 product, and the Digital Elevation Map (DEM) from the Shuttle Radar Topography Mission (SRTM). The overall accuracy (OA) based on validation data from 2001 to 2016 for all models was high over 95%. DEM and minimum winter temperature were two distinct variables over the study area with particularly high relative importance. ANN produced more realistic spatial distribution of the classified climates despite having a slightly lower OA than the others. The accuracy of the models using high altitudinal in-situ data of the Mountain Meteorology Observation System (MMOS) was also assessed. Although the data length of the MMOS data was relatively short (2013 to 2017), it proved that the snowy, dry and cold winter and cool summer class (Dwc) is widely located in the eastern coastal region of South Korea. Temporal shifting of climate was examined through a comparison of climate maps produced by period: from 1950 to 2000, from 1983 to 2000, and from 2001 to 2013. A shrinking trend of snow classes (D) over the Korean Peninsula was clearly observed from the ANN-based climate classification results. Shifting trends of climate with the decrease/increase of snow (D)/temperate (C) classes were clearly shown in the maps produced using the proposed approaches, consistent with the results from the reanalysis data of the Climatic Research Unit (CRU) and Global Precipitation Climatology Centre (GPCC)

A Review on the Application of Natural Computing in Environmental Informatics

Natural computing offers new opportunities to understand, model and analyze the complexity of the physical and human-created environment. This paper examines the application of natural computing in environmental informatics, by investigating related work in this research field. Various nature-inspired techniques are presented, which have been employed to solve different relevant problems. Advantages and disadvantages of these techniques are discussed, together with analysis of how natural computing is generally used in environmental research.Comment: Proc. of EnviroInfo 201

Geographical information systems and remote sensing methods in the estimation of potential dew volume and its utilization in the United Arab Emirates

In a fast growing region of Middle East and with rapid depletion of fossil groundwater, possibilities for dew utilization as a limited renewable water resource play an important role in the water management of the United Arab Emirates. Despite projected changes in air temperature and rainfall, geographical and topographical features of the UAE show some potential for dew harvesting, mostly at the altitudes higher than 1000 m and some isolated oasis areas. With the help of geographical information system (GIS), remote sensing, and numerical and theoretical methods, approximate volumes of dew were estimated. Meteorological data was inputted together with theoretical and numerical calculations into grids by using pixelization processes. Methods such as zonal statistics, kriging, semi-kriging, and interpolation were implemented through GIS software. Another method used in this research is supervised classification and normalized difference vegetation index (NDVI) which is being determined by means of software IDRISI terra set. After finishing all the proposed methods applied in this research, four belts of potential dew use were presented. The Arabian Desert in the territory of the United Arab Emirates has no potential for dew utilization. The zone close to the oases has very low possibility of dew use. The hilly-mountainous area between 500 and 800 m.a.s.l. has medium possibility for dew use. There is a high possibility for dew use on mountain Al Hajar, occupying the area higher than 800 m; 1.3% of the whole country’s territory has excellent potential for dew use. In this part of the country, theoretically, it is possible to use dew for farming and partial watering. Experimental study together with GIS, remote sensing, and numerical analysis may extend knowledge about dew properties. Although this research includes theoretical calculations of dew utilization and has some limitations, it still presents a new insight into climate cycles in this part of the Arabian Peninsula and a way to understand them better

Assessing the role of EO in biodiversity monitoring: options for integrating in-situ observations with EO within the context of the EBONE concept

The European Biodiversity Observation Network (EBONE) is a European contribution on terrestrial monitoring to GEO BON, the Group on Earth Observations Biodiversity Observation Network. EBONE’s aims are to develop a system of biodiversity observation at regional, national and European levels by assessing existing approaches in terms of their validity and applicability starting in Europe, then expanding to regions in Africa. The objective of EBONE is to deliver: 1. A sound scientific basis for the production of statistical estimates of stock and change of key indicators; 2. The development of a system for estimating past changes and forecasting and testing policy options and management strategies for threatened ecosystems and species; 3. A proposal for a cost-effective biodiversity monitoring system. There is a consensus that Earth Observation (EO) has a role to play in monitoring biodiversity. With its capacity to observe detailed spatial patterns and variability across large areas at regular intervals, our instinct suggests that EO could deliver the type of spatial and temporal coverage that is beyond reach with in-situ efforts. Furthermore, when considering the emerging networks of in-situ observations, the prospect of enhancing the quality of the information whilst reducing cost through integration is compelling. This report gives a realistic assessment of the role of EO in biodiversity monitoring and the options for integrating in-situ observations with EO within the context of the EBONE concept (cfr. EBONE-ID1.4). The assessment is mainly based on a set of targeted pilot studies. Building on this assessment, the report then presents a series of recommendations on the best options for using EO in an effective, consistent and sustainable biodiversity monitoring scheme. The issues that we faced were many: 1. Integration can be interpreted in different ways. One possible interpretation is: the combined use of independent data sets to deliver a different but improved data set; another is: the use of one data set to complement another dataset. 2. The targeted improvement will vary with stakeholder group: some will seek for more efficiency, others for more reliable estimates (accuracy and/or precision); others for more detail in space and/or time or more of everything. 3. Integration requires a link between the datasets (EO and in-situ). The strength of the link between reflected electromagnetic radiation and the habitats and their biodiversity observed in-situ is function of many variables, for example: the spatial scale of the observations; timing of the observations; the adopted nomenclature for classification; the complexity of the landscape in terms of composition, spatial structure and the physical environment; the habitat and land cover types under consideration. 4. The type of the EO data available varies (function of e.g. budget, size and location of region, cloudiness, national and/or international investment in airborne campaigns or space technology) which determines its capability to deliver the required output. EO and in-situ could be combined in different ways, depending on the type of integration we wanted to achieve and the targeted improvement. We aimed for an improvement in accuracy (i.e. the reduction in error of our indicator estimate calculated for an environmental zone). Furthermore, EO would also provide the spatial patterns for correlated in-situ data. EBONE in its initial development, focused on three main indicators covering: (i) the extent and change of habitats of European interest in the context of a general habitat assessment; (ii) abundance and distribution of selected species (birds, butterflies and plants); and (iii) fragmentation of natural and semi-natural areas. For habitat extent, we decided that it did not matter how in-situ was integrated with EO as long as we could demonstrate that acceptable accuracies could be achieved and the precision could consistently be improved. The nomenclature used to map habitats in-situ was the General Habitat Classification. We considered the following options where the EO and in-situ play different roles: using in-situ samples to re-calibrate a habitat map independently derived from EO; improving the accuracy of in-situ sampled habitat statistics, by post-stratification with correlated EO data; and using in-situ samples to train the classification of EO data into habitat types where the EO data delivers full coverage or a larger number of samples. For some of the above cases we also considered the impact that the sampling strategy employed to deliver the samples would have on the accuracy and precision achieved. Restricted access to European wide species data prevented work on the indicator ‘abundance and distribution of species’. With respect to the indicator ‘fragmentation’, we investigated ways of delivering EO derived measures of habitat patterns that are meaningful to sampled in-situ observations

About identification of features that affect the estimation of citrus harvest

Accurate models for early harvest estimation in citrus production generally involve expensive variables. The goal of this research work was to develop a model to provide early and accurate estimations of harvest using low-cost features. Given the original data may derive from tree measurements, meteorological stations, or satellites, they have varied costs. The studied orchards included tangerines (Citrus reticulata x C. sinensis) and sweet oranges (C. sinensis) located in northeastern Argentina. Machine learning methods combined with different datasets were tested to obtain the most accurate harvest estimation. The final model is based on support vector machines with low-cost variables like species, age, irrigation, red and near-infrared reflectance in February and December, NDVI in December, rain during ripening, and humidity during fruit growth. Highlights: Red and near-infrared reflectance in February and December are helpful values to predict orange harvest. SVM is an efficient method to predict harvest. A ranking method to A ranking-based method has been developed to identify the variables that best predict orange production.  Accurate models for early harvest estimation in citrus production generally involve expensive variables. The goal of this research work was to develop a model to provide early and accurate estimations of harvest using low-cost features. Given the original data may derive from tree measurements, meteorological stations, or satellites, they have varied costs. The studied orchards included tangerines (Citrus reticulata x C. sinensis) and sweet oranges (C. sinensis) located in northeastern Argentina. Machine learning methods combined with different datasets were tested to obtain the most accurate harvest estimation. The final model is based on support vector machines with low-cost variables like species, age, irrigation, red and near-infrared reflectance in February and December, NDVI in December, rain during ripening, and humidity during fruit growth. Highlights: Red and near-infrared reflectance in February and December are helpful values to predict orange harvest. SVM is an efficient method to predict harvest. A ranking method to A ranking-based method has been developed to identify the variables that best predict orange production