Implications of whole-disc DSCOVR EPIC spectral observations for estimating Earth's spectral reflectivity based on low-earth-orbiting and geostationary observations

Earth’s reflectivity is among the key parameters of climate research. National Aeronautics and Space Administration (NASA)’s Earth Polychromatic Imaging Camera (EPIC) onboard National Oceanic and Atmospheric Administration (NOAA)’s Deep Space Climate Observatory (DSCOVR) spacecraft provides spectral reflectance of the entire sunlit Earth in the near backscattering direction every 65 to 110 min. Unlike EPIC, sensors onboard the Earth Orbiting Satellites (EOS) sample reflectance over swaths at a specific local solar time (LST) or over a fixed area. Such intrinsic sampling limits result in an apparent Earth’s reflectivity. We generated spectral reflectance over sampling areas using EPIC data. The difference between the EPIC and EOS estimates is an uncertainty in Earth’s reflectivity. We developed an Earth Reflector Type Index (ERTI) to discriminate between major Earth atmosphere components: clouds, cloud-free ocean, bare and vegetated land. Temporal variations in Earth’s reflectivity are mostly determined by clouds. The sampling area of EOS sensors may not be sufficient to represent cloud variability, resulting in biased estimates. Taking EPIC reflectivity as a reference, low-earth-orbiting-measurements at the sensor-specific LST tend to overestimate EPIC values by 0.8% to 8%. Biases in geostationary orbiting approximations due to a limited sampling area are between −0.7% and 12%. Analyses of ERTI-based Earth component reflectivity indicate that the disagreement between EPIC and EOS estimates depends on the sampling area, observation time and vary between −10% and 23%.The NASA/GSFC DSCOVR project is funded by NASA Earth Science Division. W. Song, G. Yan, and X. Mu were also supported by the key program of National Natural Science Foundation of China (NSFC; Grant No. 41331171). This research was conducted and completed during a 13-month research stay of the lead author in the Department of Earth and Environment, Boston University as a joint Ph.D. student, which was supported by the Chinese Scholarship Council (201606040098). DSCOVR EPIC L1B data were obtained from the NASA Langley Research Center Atmospheric Science Data Center. The authors would like to thank the editor who handled this paper and the two anonymous reviewers for providing helpful and constructive comments and suggestions that significantly helped us improve the quality of this paper. (NASA Earth Science Division; 41331171 - key program of National Natural Science Foundation of China (NSFC); 201606040098 - Chinese Scholarship Council)Accepted manuscrip

Preliminary assessment of soil moisture over vegetation

Modeling of surface energy fluxes was combined with in-situ measurement of surface parameters, specifically the surface sensible heat flux and the substrate soil moisture. A vegetation component was incorporated in the atmospheric/substrate model and subsequently showed that fluxes over vegetation can be very much different than those over bare soil for a given surface-air temperature difference. The temperature signatures measured by a satellite or airborne radiometer should be interpreted in conjunction with surface measurements of modeled parameters. Paradoxically, analyses of the large-scale distribution of soil moisture availability shows that there is a very high correlation between antecedent precipitation and inferred surface moisture availability, even when no specific vegetation parameterization is used in the boundary layer model. Preparatory work was begun in streamlining the present boundary layer model, developing better algorithms for relating surface temperatures to substrate moisture, preparing for participation in the French HAPEX experiment, and analyzing aircraft microwave and radiometric surface temperature data for the 1983 French Beauce experiments

Do we (need to) care about canopy radiation schemes in DGVMs? Caveats and potential impacts

Dynamic global vegetation models (DGVMs) are an essential part of current state-of-the-art Earth system models. In recent years, the complexity of DGVMs has increased by incorporating new important processes like, e.g., nutrient cycling and land cover dynamics, while biogeophysical processes like surface radiation have not been developed much further. Canopy radiation models are however very important for the estimation of absorption and reflected fluxes and are essential for a proper estimation of surface carbon, energy and water fluxes. The present study provides an overview of current implementations of canopy radiation schemes in a couple of state-of-the-art DGVMs and assesses their accuracy in simulating canopy absorption and reflection for a variety of different surface conditions. Systematic deviations in surface albedo and fractions of absorbed photosynthetic active radiation (faPAR) are identified and potential impacts are assessed. The results show clear deviations for both, absorbed and reflected, surface solar radiation fluxes. FaPAR is typically underestimated, which results in an underestimation of gross primary productivity (GPP) for the investigated cases. The deviation can be as large as 25% in extreme cases. Deviations in surface albedo range between −0.15 ≤ Δα ≤ 0.36, with a slight positive bias on the order of Δα ≈ 0.04. Potential radiative forcing caused by albedo deviations is estimated at −1.25 ≤ RF ≤ −0.8 (W m−2), caused by neglect of the diurnal cycle of surface albedo. The present study is the first one that provides an assessment of canopy RT schemes in different currently used DGVMs together with an assessment of the potential impact of the identified deviations. The paper illustrates that there is a general need to improve the canopy radiation schemes in DGVMs and provides different perspectives for their improvement

A photogeologic comparison of Skylab and LANDSAT images of southwestern Nevada and southeastern California

There are no author-identified significant results in this report

Remote sensing applications to hydrologic modeling in the southern Sierra Nevada and portions of the San Joaquin Valley, volume 1

The author has identified the following significant results. Characteristics of LANDSAT MSS imagery present problems in using satellite radiation measurements to estimate the shortwave albedo of an alpine snow cover. Every 15 minute USGS quadrangle contains over 100,000 pixels which poses a computation problem if each pixel is to be evaluated individually. The sampling interval may be sufficiently great to mask some effects of terrain and vegetation on reflectance. Three frames of LANDSAT imagery are needed for complete coverage of the study area, yet less than one third of the area coverage from each frame covers an area of interest. Because of distortions inherent in the imagery, information regarding spacecraft altitude, attitude, and position must be statistically derived with respect to ground control points in the image whose geodetic locations are known. An inspection of shade points indicates that up to one third of the most heavily snow covered areas may saturate in bands 4 through 6. LANDSAT's 9 day repeat cycle is not optimum for snow cover reflectance modeling because the most pronounced changes in albedo occur most nearly following a new snowfall. Such a snowfall, occurring between overpasses, is inadequately represented by extrapolation from the previous overpasses

Evaluation and Improvements of the Offline CLM4 Using ARM Data

Hourly ground observations for year 2004 from the Atmospheric Radiation Measurement (ARM) program of the Department of Energy were used to examine the surface and subsurface energy simulations of the Community Land Model version 4 (CLM4). The 2 m air temperature, wind speed, solar radiation, downward longwave radiation, and precipitation observed by the ARM project were used to force the offline CLM4, and the ARM land surface and soil observations including skin temperature (Tskin), soil temperature and moisture, and sensible, latent, and ground heat fluxes were used to evaluate the model outputs. The default and ARM-forced CLM4 runs for 2004 were compared to assess the improvements to the model for hourly, daily, and seasonal timescales. The root mean square error and the Pearson correlation coefficient show that the ARM-forced offline CLM4 leads to improved accuracy in surface and soil energy fluxes in comparison with the default offline CLM4. Nevertheless, a warm bias of 2°C to 3°C was assessed on Tskin in summer due to warm maximum temperatures and in winter due to warm minimum temperatures. To improve CLM4 Tskin simulations, a proposed vegetation emissivity parameterization was evaluated locally and globally using both ARM and Moderate Resolution Imaging Spectroradiometer remote-sensing observations. This new algorithm results in cooling and an improvement of 0.17 K for the ARM site. Global evaluation revealed improvement in areas of intermediate canopy density

Soil Moisture Workshop

The Soil Moisture Workshop was held at the United States Department of Agriculture National Agricultural Library in Beltsville, Maryland on January 17-19, 1978. The objectives of the Workshop were to evaluate the state of the art of remote sensing of soil moisture; examine the needs of potential users; and make recommendations concerning the future of soil moisture research and development. To accomplish these objectives, small working groups were organized in advance of the Workshop to prepare position papers. These papers served as the basis for this report

Modeling L-Band Microwave Emission From Soil-Vegetation System

During a field campaign covering the 2002 corn growing season, a dual polarized tower mounted L-band (1.4 GHz) radiometer (LRAD) provided brightness temperature (T¬B) measurements at preset intervals, incidence and azimuth angles. These radiometer measurements were supported by an extensive characterization of land surface variables including soil moisture, soil temperature, vegetation biomass, and surface roughness. During the period from May 22, 2002 to August 30, 2002 a range of vegetation water content (W) of 0.0 to 4.3 kg m-2, ten days of radiometer and ground measurements were available. Using this data set, the effects of corn vegetation on surface emissions are investigated by means of a semi-empirical radiative transfer model. Additionally, the impact of roughness on the surface emission is quantified using T¬B measurements over bare soil conditions. Subsequently, the estimated roughness parameters, ground measurements and horizontally (H)-polarized TB are employed to invert the H-polarized transmissivity (γh) for the monitored corn growing season

Measuring and modeling near-surface reflected and emitted radiation fluxes at the FIFE site

Information is presented pertaining to the measurement and estimation of reflected and emitted components of the radiation balance. Information is included about reflectance and transmittance of solar radiation from and through the leaves of some grass and forb prairie species, bidirectional reflectance from a prairie canopy is discussed and measured and estimated fluxes are described of incoming and outgoing longwave and shortwave radiation. Results of the study showed only very small differences in reflectances and transmittances for the adaxial and abaxial surfaces of grass species in the visible and infrared wavebands, but some differences in the infrared wavebands were noted for the forbs. Reflectance from the prairie canopy changed as a function of solar and view zenith angles in the solar principal plane with definite asymmetry about nadir. The surface temperature of prairie canopies was found to vary by as much as 5 C depending on view zenith and azimuth position and on the solar azimuth. Aerodynamic temperature calculated from measured sensible heat fluxes ranged from 0 to 3 C higher than nadir-viewed temperatures. Models were developed to estimate incoming and reflected shortwave radiation from data collected with a Barnes Modular Multiband Radiometer. Several algorithms for estimating incoming longwave radiation were evaluated and compared to actual measures of that parameter. Net radiation was calculated using the estimated components of the shortwave radiation streams, determined from the algorithms developed, and from the longwave radiation streams provided by the Brunt, modified Deacon, and the Stefan-Boltzmann models. Estimates of net radiation were compared to measured values and found to be within the measurement error of the net radiometers used in the study