Ecological IVIS design : using EID to develop a novel in-vehicle information system

New in-vehicle information systems (IVIS) are emerging which purport to encourage more environment friendly or ‘green’ driving. Meanwhile, wider concerns about road safety and in-car distractions remain. The ‘Foot-LITE’ project is an effort to balance these issues, aimed at achieving safer and greener driving through real-time driving information, presented via an in-vehicle interface which facilitates the desired behaviours while avoiding negative consequences. One way of achieving this is to use ecological interface design (EID) techniques. This article presents part of the formative human-centred design process for developing the in-car display through a series of rapid prototyping studies comparing EID against conventional interface design principles. We focus primarily on the visual display, although some development of an ecological auditory display is also presented. The results of feedback from potential users as well as subject matter experts are discussed with respect to implications for future interface design in this field

Analyzing Benefits of Connected Vehicle Technologies During Incidents on Freeways and Diversion Strategies Implementation: A Microsimulation-Based Case Study of Florida\u27s Turnpike

The full utilization of connected vehicles (CVs) is highly anticipated to become a reality soon. As CVs become increasingly prevalent in our roadway network, connected technologies have enormous potential to improve safety. This study conducted a microscopic simulation to quantify the benefits of CVs in improving freeway safety along a 7.8-mile section on Florida’s Turnpike (SR-91) system. The simulation incorporated driver compliance behavior in a CV environment. The simulation was implemented via an existing VISSIM network model partially developed by the Florida Department of Transportation (FDOT). In addition, the study analyzed how CVs would assist in detour operations as a strategy for congestion management during traffic incidents on freeways. The Surrogate Safety Assessment Model (SSAM) software was used to evaluate the benefits of CVs based on time-to-collision (TTC) as the performance measure. The TTC was evaluated at various CV market penetration rates (MPRs) of 0%, 25%, 50%, 75%, and 100%. The results showed a decreasing trend of conflicts for morning and evening peak hours, especially from 25% to 100% CV MPRs. The benefits were statistically significant at a 95% confidence level for high CV MPR (above 25%). Upon an incident on the freeway, at higher CV MPRs simulations, the detour strategy seemed to reduce travel time on the freeway. Besides, the detour strategy was more helpful when the incident clearance duration lasted more than 30 minutes. Findings from this study may help the incident management process prepare for detour strategies based on the severity of the incident at hand and could explain the importance of CVs in supporting warning and management strategies for drivers to improve safety on freeways. Keywords: Conflicts, Connected Vehicles, Driver Compliance Rate, Detour, Incident Modeling, Safety Surrogate Measure

Safe Intelligent Driver Assistance System in V2X Communication Environments based on IoT

In the modern world, power and speed of cars have increased steadily, as traffic continued to increase. At the same time highway-related fatalities and injuries due to road incidents are constantly growing and safety problems come first. Therefore, the development of Driver Assistance Systems (DAS) has become a major issue. Numerous innovations, systems and technologies have been developed in order to improve road transportation and safety. Modern computer vision algorithms enable cars to understand the road environment with low miss rates. A number of Intelligent Transportation Systems (ITSs), Vehicle Ad-Hoc Networks (VANETs) have been applied in the different cities over the world. Recently, a new global paradigm, known as the Internet of Things (IoT) brings new idea to update the existing solutions. Vehicle-to-Infrastructure communication based on IoT technologies would be a next step in intelligent transportation for the future Internet-of-Vehicles (IoV). The overall purpose of this research was to come up with a scalable IoT solution for driver assistance, which allows to combine safety relevant information for a driver from different types of in-vehicle sensors, in-vehicle DAS, vehicle networks and driver`s gadgets. This study brushed up on the evolution and state-of-the-art of Vehicle Systems. Existing ITSs, VANETs and DASs were evaluated in the research. The study proposed a design approach for the future development of transport systems applying IoT paradigm to the transport safety applications in order to enable driver assistance become part of Internet of Vehicles (IoV). The research proposed the architecture of the Safe Intelligent DAS (SiDAS) based on IoT V2X communications in order to combine different types of data from different available devices and vehicle systems. The research proposed IoT ARM structure for SiDAS, data flow diagrams, protocols. The study proposes several IoT system structures for the vehicle-pedestrian and vehicle-vehicle collision prediction as case studies for the flexible SiDAS framework architecture. The research has demonstrated the significant increase in driver situation awareness by using IoT SiDAS, especially in NLOS conditions. Moreover, the time analysis, taking into account IoT, Cloud, LTE and DSRS latency, has been provided for different collision scenarios, in order to evaluate the overall system latency and ensure applicability for real-time driver emergency notification. Experimental results demonstrate that the proposed SiDAS improves traffic safety

Spatiotemporal Multicast and Partitionable Group Membership Service

The recent advent of wireless mobile ad hoc networks and sensor networks creates many opportunities and challenges. This thesis explores some of them. In light of new application requirements in such environments, it proposes a new multicast paradigm called spatiotemporal multicast for supporting ad hoc network applications which require both spatial and temporal coordination. With a focus on a special case of spatiotemporal multicast, called mobicast, this work proposes several novel protocols and analyzes their performances. This dissertation also investigates implications of mobility on the classical group membership problem in distributed computing, proposes a new specification for a partitionable group membership service catering to applications on wireless mobile ad hoc networks, and provides a mobility-aware algorithm and middleware for this service. The results of this work bring new insights into the design and analysis of spatiotemporal communication protocols and fault-tolerant computing in wireless mobile ad hoc networks

Toolbox of Countermeasures for Rural Two-Lane Curves, June 2012

The Federal Highway Administration (FHWA) estimates that 58 percent of roadway fatalities are lane departures, while 40 percent of fatalities are single-vehicle run-off-road (SVROR) crashes. Addressing lane-departure crashes is therefore a priority for national, state, and local roadway agencies. Horizontal curves are of particular interest because they have been correlated with increased crash occurrence. This toolbox was developed to assist agencies address crashes at rural curves. The main objective of this toolbox is to summarize the effectiveness of various known curve countermeasures. While education, enforcement, and policy countermeasures should also be considered, they were not included given the toolbox focuses on roadway-based countermeasures. Furthermore, the toolbox is geared toward rural two-lane curves. The research team identified countermeasures based on their own research, through a survey of the literature, and through discussions with other professionals. Coverage of curve countermeasures in this toolbox is not necessarily comprehensive. For each countermeasure covered, this toolbox includes the following information: description, application, effectiveness, advantages, and disadvantages

Detecting Non-Line of Sight to Prevent Accidents in Vehicular Ad hoc Networks

There are still many challenges in the field of VANETs that encouraged researchers to conduct further investigation in this field to meet these challenges. The issue pertaining to routing protocols such as delivering the warning messages to the vehicles facing Non-Line of Sight (NLOS) situations without causing the storm problem and channel contention, is regarded as a serious dilemma which is required to be tackled in VANET, especially in congested environments. This requires the designing of an efficient mechanism of routing protocol that can broadcast the warning messages from the emergency vehicles to the vehicles under NLOS, reducing the overhead and increasing the packet delivery ratio with a reduced time delay and channel utilisation. The main aim of this work is to develop the novel routing protocol for a high-density environment in VANET through utilisation of its high mobility features, aid of the sensors such as Global Positioning System (GPS) and Navigation System (NS). In this work, the cooperative approach has been used to develop the routing protocol called the Co-operative Volunteer Protocol (CVP), which uses volunteer vehicles to disseminate the warning message from the source to the target vehicle under NLOS issue; this also increases the packet delivery ratio, detection of NLOS and resolution of NLOS by delivering the warning message successfully to the vehicle under NLOS, thereby causing a direct impact on the reduction of collisions between vehicles in normal mode and emergency mode on the road near intersections or on highways. The cooperative approach adopted for warning message dissemination reduced the rebroadcast rate of messages, thereby decreasing significantly the storm issue and the channel contention. A novel architecture has been developed by utilising the concept of a Context-Aware System (CAS), which clarifies the OBU components and their interaction with each other in order to collect data and take the decisions based on the sensed circumstances. The proposed architecture has been divided into three main phases: sensing, processing and acting. The results obtained from the validation of the proposed CVP protocol using the simulator EstiNet under specific conditions and parameters showed that performance of the proposed protocol is better than that of the GRANT protocol with regard to several metrics such as packet delivery ratio, neighbourhood awareness, channel utilisation, overhead and latency. It is also successfully shown that the proposed CVP could detect the NLOS situation and solves it effectively and efficiently for both the intersection scenario in urban areas and the highway scenario

Information collection algorithm for vehicular ad-hoc networks (application domain: Urban Traffic Wireless Vehicular Ad-Hoc Networks (VANETs))

Vehicle to vehicle communication (V2VC) is one of the modern approaches for exchanging and generating traffic information with (yet to be realized) potential to improve road safety, driving comfort and traffic control. In this research, we present a novel algorithm which is based on V2V communication, uses in-vehicle sensor information and in collaboration with the other vehicles' sensor information can detect road conditions and determine the geographical area where this road condition exists – e.g. geographical area where there is traffic density, unusual traffic behaviour, a range of weather conditions (raining), etc. The algorithms' built-in automatic geographical restriction of the data collection, aggregation and dissemination mechanisms allows warning messages to be received by any car, not necessarily sharing the identified road condition, which may then be used to identify the optimum route taken by the vehicle e.g. avoid bottlenecks or dangerous areas including accidents or congestions on their current routes. This research covers the middle ground between MANET [1] and collaborative data generation based on knowledge granularity (aggregation). It investigates the possibility of designing, implementing and modelling of the functionality of an algorithm (as part of the design of an intelligent node in an Intelligent Transportation System - ITS) that ensures active participation in the formation, routing and general network support of MANETs and also helps in-car traffic information and real-time control generation and distribution. The work is natural extension of the efforts of several large EU projects like DRIVE [2], GST [3] and SAFESPOT [4]

Pedal cyclist fatalities in London: analysis of police collision files (2007-2011)

The objective of this research report is to support the development of the forthcoming Cycle Safety Action Plan being prepared by Transport for London to be published in 2014. TfL wished to improve the understanding of the factors which lead to collisions involving fatally injured cyclists and those with life-changing injuries. The research focussed on an in-depth analysis of collisions that occurred between 2007 – 2011 when there were 79 fatal and life threatening collisions involving cyclists of which 53 were available for analysis

How Locals Need to Prepare for the Future of V2V/V2I Connected Vehicles

Connected and Automated Vehicles (CAVs) are expected to affect the foundations of transportation operations and roadway maintenance as they become more prevalent on the roadways. This report is an effort to address this complex subject for the various owners, agencies and stakeholders involved in traffic operations. It discusses the connected vehicle ecosystem and its background, potential CAV applications, types of communication and hardware required for CAV systems, and recommendations to local road owners. The report also includes a survey sent to local road owners to assess the current readiness of the transportation system for CAVs. Although it is too early to give specific recommendations, general guidance is provided for road owners to begin preparing for the future of CAVs