Circuit and Architecture Co-Design of STT-RAM for High Performance and Low Energy

Spin-Transfer Torque Random Access Memory (STT-RAM) has been proved a promising emerging nonvolatile memory technology suitable for many applications such as cache mem- ory of CPU. Compared with other conventional memory technology, STT-RAM offers many attractive features such as nonvolatility, fast random access speed and extreme low leakage power. However, STT-RAM is still facing many challenges. First of all, programming STT-RAM is a stochastic process due to random thermal fluctuations, so the write errors are hard to avoid. Secondly, the existing STT-RAM cell designs can be used for only single-port accesses, which limits the memory access bandwidth and constraints the system performance. Finally, while other memory technology supports multi-level cell (MLC) design to boost the storage density, adopting MLC to STT-RAM brings many disadvantages such as requirement for large transistor and low access speed. In this work, we proposed solutions on both circuit and architecture level to address these challenges. For the write error issues, we proposed two probabilistic methods, namely write-verify- rewrite with adaptive period (WRAP) and verify-one-while-writing (VOW), for performance improvement and write failure reduction. For dual-port solution, we propose the design methods to support dual-port accesses for STT-RAM. The area increment by introducing an additional port is reduced by leveraging the shared source-line structure. Detailed analysis on the performance/reliability degrada- tion caused by dual-port accesses is performed, and the corresponding design optimization is provided. To unleash the potential of MLC STT-RAM cache, we proposed a new design through a cross-layer co-optimization. The memory cell structure integrated the reversed stacking of magnetic junction tunneling (MTJ) for a more balanced device and design trade-off. In architecture development, we presented an adaptive mode switching mechanism: based on application’s memory access behavior, the MLC STT-RAM cache can dynamically change between low latency SLC mode and high capacity MLC mode. Finally, we present a 4Kb test chip design which can support different types and sizes of MTJs. A configurable sensing solution is used in the test chip so that it can support wide range of MTJ resistance. Such test chip design can help to evaluate various type of MTJs in the future

Spin-Transfer-Torque (STT) Devices for On-chip Memory and Their Applications to Low-standby Power Systems

With the scaling of CMOS technology, the proportion of the leakage power to total power consumption increases. Leakage may account for almost half of total power consumption in high performance processors. In order to reduce the leakage power, there is an increasing interest in using nonvolatile storage devices for memory applications. Among various promising nonvolatile memory elements, spin-transfer torque magnetic RAM (STT-MRAM) is identified as one of the most attractive alternatives to conventional SRAM. However, several design challenges of STT-MRAM such as shared read and write current paths, single-ended sensing, and high dynamic power are major challenges to be overcome to make it suitable for on-chip memories. To mitigate such problems, we propose a domain wall coupling based spin-transfer torque (DWCSTT) device for on-chip caches. Our proposed DWCSTT bit-cell decouples the read and the write current paths by the electrically-insulating magnetic coupling layer so that we can separately optimize read operation without having an impact on write-ability. In addition, the complementary polarizer structure in the read path of the DWCSTT device allows DWCSTT to enable self-referenced differential sensing. DWCSTT bit-cells improve the write power consumption due to the low electrical resistance of the write current path. Furthermore, we also present three different bit-cell level design techniques of Spin-Orbit Torque MRAM (SOT-MRAM) for alleviating some of the inefficiencies of conventional magnetic memories while maintaining the advantages of spin-orbit torque (SOT) based novel switching mechanism such as low write current requirement and decoupled read and write current path. Our proposed SOT-MRAM with supporting dual read/write ports (1R/1W) can address the issue of high-write latency of STT-MRAM by simultaneous 1R/1W accesses. Second, we propose a new type of SOT-MRAM which uses only one access transistor along with a Schottky diode in order to mitigate the area-overhead caused by two access transistors in conventional SOT-MRAM. Finally, a new design technique of SOT-MRAM is presented to improve the integration density by utilizing a shared bit-line structure

Multi-port Memory Design for Advanced Computer Architectures

In this thesis, we describe and evaluate novel memory designs for multi-port on-chip and off-chip use in advanced computer architectures. We focus on combining multi-porting and evaluating the performance over a range of design parameters. Multi-porting is essential for caches and shared-data systems, especially multi-core System-on-chips (SOC). It can significantly increase the memory access throughput. We evaluate FinFET voltage-mode multi-port SRAM cells using different metrics including leakage current, static noise margin and read/write performance. Simulation results show that single-ended multi-port FinFET SRAMs with isolated read ports offer improved read stability and flexibility over classical double-ended structures at the expense of write performance. By increasing the size of the access transistors, we show that the single-ended multi-port structures can achieve equivalent write performance to the classical double-ended multi-port structure for 9% area overhead. Moreover, compared with CMOS SRAM, FinFET SRAM has better stability and standby power. We also describe new methods for the design of FinFET current-mode multi-port SRAM cells. Current-mode SRAMs avoid the full-swing of the bitline, reducing dynamic power and access time. However, that comes at the cost of voltage drop, which compromises stability. The design proposed in this thesis utilizes the feature of Independent Gate (IG) mode FinFET, which can leverage threshold voltage by controlling the back gate voltage, to merge two transistors into one through high-Vt and low-Vt transistors. This design not only reduces the voltage drop, but it also reduces the area in multi-port current-mode SRAM design. For off-chip memory, we propose a novel two-port 1-read, 1-write (1R1W) phasechange memory (PCM) cell, which significantly reduces the probability of blocking at the bank levels. Different from the traditional PCM cell, the access transistors are at the top and connected to the bitline. We use Verilog-A to model the behavior of Ge2Sb2Te5 (GST: the storage component). We evaluate the performance of the two-port cell by transistor sizing and voltage pumping. Simulation results show that pMOS transistor is more practical than nMOS transistor as the access device when both area and power are considered. The estimated area overhead is 1.7�, compared to single-port PCM cell. In brief, the contribution we make in this thesis is that we propose and evaluate three different kinds of multi-port memories that are favorable for advanced computer architectures

High-Performance and Low-Power Magnetic Material Memory Based Cache Design

Magnetic memory technologies are very promising candidates to be universal memory due to its good scalability, zero standby power and radiation hardness. Having a cell area much smaller than SRAM, magnetic memory can be used to construct much larger cache with the same die footprint, leading to siginficant improvement of overall system performance and power consumption especially in this multi-core era. However, magnetic memories have their own drawbacks such as slow write, read disturbance and scaling limitation, making its usage as caches challenging. This dissertation comprehensively studied these two most popular magnetic memory technologies. Design exploration and optimization for the cache design from different design layers including the memory devices, peripheral circuit, memory array structure and micro-architecture are presented. By leveraging device features, two major micro-architectures -multi-retention cache hierarchy and process-variation-aware cache are presented to improve the write performance of STT-RAM. The enhancement in write performance results in the degradation of read operations, in terms of both speed and data reliability. This dissertation also presents an architecture to resolve STT-RAM read disturbance issue. Furthermore, the scaling of STT-RAM is hindered due to the required size of switching transistor. To break the cell area limitation of STT-RAM, racetrack memory is studied to achieve an even higher memory density and better performance and lower energy consumption. With dedicated elaboration, racetrack memory based cache design can achieve a siginificant area reduction and energy saving when compared to optimized STT-RAM

Exploiting Inter- and Intra-Memory Asymmetries for Data Mapping in Hybrid Tiered-Memories

Modern computing systems are embracing hybrid memory comprising of DRAM and non-volatile memory (NVM) to combine the best properties of both memory technologies, achieving low latency, high reliability, and high density. A prominent characteristic of DRAM-NVM hybrid memory is that it has NVM access latency much higher than DRAM access latency. We call this inter-memory asymmetry. We observe that parasitic components on a long bitline are a major source of high latency in both DRAM and NVM, and a significant factor contributing to high-voltage operations in NVM, which impact their reliability. We propose an architectural change, where each long bitline in DRAM and NVM is split into two segments by an isolation transistor. One segment can be accessed with lower latency and operating voltage than the other. By introducing tiers, we enable non-uniform accesses within each memory type (which we call intra-memory asymmetry), leading to performance and reliability trade-offs in DRAM-NVM hybrid memory. We extend existing NVM-DRAM OS in three ways. First, we exploit both inter- and intra-memory asymmetries to allocate and migrate memory pages between the tiers in DRAM and NVM. Second, we improve the OS's page allocation decisions by predicting the access intensity of a newly-referenced memory page in a program and placing it to a matching tier during its initial allocation. This minimizes page migrations during program execution, lowering the performance overhead. Third, we propose a solution to migrate pages between the tiers of the same memory without transferring data over the memory channel, minimizing channel occupancy and improving performance. Our overall approach, which we call MNEME, to enable and exploit asymmetries in DRAM-NVM hybrid tiered memory improves both performance and reliability for both single-core and multi-programmed workloads.Comment: 15 pages, 29 figures, accepted at ACM SIGPLAN International Symposium on Memory Managemen

L2C2: Last-level compressed-contents non-volatile cache and a procedure to forecast performance and lifetime

Several emerging non-volatile (NV) memory technologies are rising as interesting alternatives to build the Last-Level Cache (LLC). Their advantages, compared to SRAM memory, are higher density and lower static power, but write operations wear out the bitcells to the point of eventually losing their storage capacity. In this context, this paper presents a novel LLC organization designed to extend the lifetime of the NV data array and a procedure to forecast in detail the capacity and performance of such an NV-LLC over its lifetime. From a methodological point of view, although different approaches are used in the literature to analyze the degradation of an NV-LLC, none of them allows to study in detail its temporal evolution. In this sense, this work proposes a forecasting procedure that combines detailed simulation and prediction, allowing an accurate analysis of the impact of different cache control policies and mechanisms (replacement, wear-leveling, compression, etc.) on the temporal evolution of the indices of interest, such as the effective capacity of the NV-LLC or the system IPC. We also introduce L2C2, a LLC design intended for implementation in NV memory technology that combines fault tolerance, compression, and internal write wear leveling for the first time. Compression is not used to store more blocks and increase the hit rate, but to reduce the write rate and increase the lifetime during which the cache supports near-peak performance. In addition, to support byte loss without performance drop, L2C2 inherently allows N redundant bytes to be added to each cache entry. Thus, L2C2+N, the endurance-scaled version of L2C2, allows balancing the cost of redundant capacity with the benefit of longer lifetime. For instance, as a use case, we have implemented the L2C2 cache with STT-RAM technology. It has affordable hardware overheads compared to that of a baseline NV-LLC without compression in terms of area, latency and energy consumption, and increases up to 6-37 times the time in which 50% of the effective capacity is degraded, depending on the variability in the manufacturing process. Compared to L2C2, L2C2+6 which adds 6 bytes of redundant capacity per entry, that means 9.1% of storage overhead, can increase up to 1.4-4.3 times the time in which the system gets its initial peak performance degraded

Applications of Emerging Memory in Modern Computer Systems: Storage and Acceleration

In recent year, heterogeneous architecture emerges as a promising technology to conquer the constraints in homogeneous multi-core architecture, such as supply voltage scaling, off-chip communication bandwidth, and application parallelism. Various forms of accelerators, e.g., GPU and ASIC, have been extensively studied for their tradeoffs between computation efficiency and adaptivity. But with the increasing demand of the capacity and the technology scaling, accelerators also face limitations on cost-efficiency due to the use of traditional memory technologies and architecture design. Emerging memory has become a promising memory technology to inspire some new designs by replacing traditional memory technologies in modern computer system. In this dissertation, I will first summarize my research on the application of Spin-transfer torque random access memory (STT-RAM) in GPU memory hierarchy, which offers simple cell structure and non-volatility to enable much smaller cell area than SRAM and almost zero standby power. Then I will introduce my research about memristor implementation as the computation component in the neuromorphic computing accelerator, which has the similarity between the programmable resistance state of memristors and the variable synaptic strengths of biological synapses to simplify the realization of neural network model. At last, a dedicated interconnection network design for multicore neuromorphic computing system will be presented to reduce the prominent average latency and power consumption brought by NoC in a large size neuromorphic computing system

Improving the Performance and Endurance of Persistent Memory with Loose-Ordering Consistency

Persistent memory provides high-performance data persistence at main memory. Memory writes need to be performed in strict order to satisfy storage consistency requirements and enable correct recovery from system crashes. Unfortunately, adhering to such a strict order significantly degrades system performance and persistent memory endurance. This paper introduces a new mechanism, Loose-Ordering Consistency (LOC), that satisfies the ordering requirements at significantly lower performance and endurance loss. LOC consists of two key techniques. First, Eager Commit eliminates the need to perform a persistent commit record write within a transaction. We do so by ensuring that we can determine the status of all committed transactions during recovery by storing necessary metadata information statically with blocks of data written to memory. Second, Speculative Persistence relaxes the write ordering between transactions by allowing writes to be speculatively written to persistent memory. A speculative write is made visible to software only after its associated transaction commits. To enable this, our mechanism supports the tracking of committed transaction ID and multi-versioning in the CPU cache. Our evaluations show that LOC reduces the average performance overhead of memory persistence from 66.9% to 34.9% and the memory write traffic overhead from 17.1% to 3.4% on a variety of workloads.Comment: This paper has been accepted by IEEE Transactions on Parallel and Distributed System

Design and Code Optimization for Systems with Next-generation Racetrack Memories

With the rise of computationally expensive application domains such as machine learning, genomics, and fluids simulation, the quest for performance and energy-efficient computing has gained unprecedented momentum. The significant increase in computing and memory devices in modern systems has resulted in an unsustainable surge in energy consumption, a substantial portion of which is attributed to the memory system. The scaling of conventional memory technologies and their suitability for the next-generation system is also questionable. This has led to the emergence and rise of nonvolatile memory ( NVM ) technologies. Today, in different development stages, several NVM technologies are competing for their rapid access to the market. Racetrack memory ( RTM ) is one such nonvolatile memory technology that promises SRAM -comparable latency, reduced energy consumption, and unprecedented density compared to other technologies. However, racetrack memory ( RTM ) is sequential in nature, i.e., data in an RTM cell needs to be shifted to an access port before it can be accessed. These shift operations incur performance and energy penalties. An ideal RTM , requiring at most one shift per access, can easily outperform SRAM . However, in the worst-cast shifting scenario, RTM can be an order of magnitude slower than SRAM . This thesis presents an overview of the RTM device physics, its evolution, strengths and challenges, and its application in the memory subsystem. We develop tools that allow the programmability and modeling of RTM -based systems. For shifts minimization, we propose a set of techniques including optimal, near-optimal, and evolutionary algorithms for efficient scalar and instruction placement in RTMs . For array accesses, we explore schedule and layout transformations that eliminate the longer overhead shifts in RTMs . We present an automatic compilation framework that analyzes static control flow programs and transforms the loop traversal order and memory layout to maximize accesses to consecutive RTM locations and minimize shifts. We develop a simulation framework called RTSim that models various RTM parameters and enables accurate architectural level simulation. Finally, to demonstrate the RTM potential in non-Von-Neumann in-memory computing paradigms, we exploit its device attributes to implement logic and arithmetic operations. As a concrete use-case, we implement an entire hyperdimensional computing framework in RTM to accelerate the language recognition problem. Our evaluation shows considerable performance and energy improvements compared to conventional Von-Neumann models and state-of-the-art accelerators

Vertical Memory Optimization for High Performance Energy-efficient GPU

GPU heavily relies on massive multi-threading to achieve high throughput. The massive multi-threading imposes tremendous pressure on different storage components. This dissertation focuses on the optimization of memory subsystem including register file, L1 data cache and device memory, all of which are featured by the massive multi-threading and dominate the efficiency and scalability of GPU. A large register file is demanded in GPU for supporting fast thread switching. This dissertation first introduces a power-efficient GPU register file built on the newly emerged racetrack memory (RM). However, the shift operators of RM results in extra power and timing overhead. A holistic architecture-level technology set is developed to conquer the adverse impacts and guarantees its energy merit. Experiment results show that the proposed techniques can keep GPU performance stable compared to the baseline with SRAM based RF. Register file energy is significantly reduced by 48.5%. This work then proposes a versatile warp scheduler (VWS) to reduce the L1 data cache misses in GPU. VWS retains the intra-warp cache locality with a simple yet effective per-warp working set estimator, and enhances intra- and inter-thread-block cache locality using a thread block aware scheduler. VWS achieves on average 38.4% and 9.3% IPC improvement compared to a widely-used and a state-of-the-art warp schedulers, respectively. At last this work targets the off-chip DRAM based device memory. An integrated architecture substrate is introduced to improve the performance and energy efficiency of GPU through the efficient bandwidth utilization. The first part of the architecture substrate, thread batch enabled memory partitioning (TEMP) improves memory access parallelism. TEMP introduces thread batching to separate the memory access streams from SMs. The second part, Thread batch-aware scheduler (TBAS) is then designed to improve memory access locality. Experimental results show that TEMP and TBAS together can obtain up to 10.3% performance improvement and 11.3% DRAM energy reduction for GPU workloads