PROPORTIONAL FEEDBACK CONTROL OF DUTY CYCLE FOR DC HYBRID ACTIVE POWER FILTER

This thesis deals with the design and implementation of a feedback control scheme for a DC Hybrid Active Power Filter used to filter harmonics from a Switched Reluctance Motor (SRM) Drive load. Power electronic systems are non-linear & dynamic [1,3,5]. Power electronic systems employ switching circuits to maximize their efficiency at the penalty that switching circuits generate electrical noise called ripple current and voltage or conducted electromagnetic interference (EMI). The ripple current drawn by the power electronic systems needs to be attenuated to an acceptable level. Filters attenuate this to an acceptable level. Traditionally filters with passive inductors and capacitors are used. Active filters contain switching elements in addition to passive inductors and capacitors which reduce overall size of passive components used. Two control approaches, full-state state space, and plain proportional feedback, are evaluated for this filter. Circuit models are simulated in SPICE and mathematical models are simulated in Matlab/Simulink for evaluating these control approaches. Proportional feedback control was chosen for implementation and the reason for this is provided in the thesis. The active filter was tested with chosen feedback control and experimental results were compared with simulation results. Inferences and scope for further work are finally presented

Design Methodology for a Very High Frequency Resonant Boost Converter

This paper introduces a design methodology for a resonant boost converter topology that is suitable for operation at very high frequencies. The topology we examine features a low parts count and fast transient response, but suffers from higher device stresses compared to other topologies that use a larger number of passive components. A numerical design procedure is developed for this topology that does not rely on time-domain simulation sweeps across parameters. This allows the optimal converter design to be found for a particular main semiconductor switch. If an integrated power process is used where the designer has control over layout of the semiconductor switch, the optimal combination of converter design and semiconductor layout can be found. To validate the proposed converter topology and design approach, a 75-MHz prototype converter is designed and experimentally demonstrated. The performance of the prototype closely matches that predicted by the design procedure, and the converter achieves good efficiency over a wide input voltage range

A design for an RGB LED driver with independent PWM control and fast settling time

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.Includes bibliographical references (leaves 76-77).A small sized and efficient method to power RGB LEDs for use as backlights in flat panel displays is explored in this thesis. The proposed method is to drive a parallel switched connection of LEDs with a single Average Mode Controlled buck regulator.Specifications for the switching regulator and control circuitry are described. The application circuit demonstrates current settling times between 7[mu]s and 30[mu]s at a switching frequency of 290kHz. Current settling is improved at higher switching frequencies, with settling times approaching a 2[mu]s to 4[mu]s range at 1MHz switching.by Awo Dede O. Ashiabor.M.Eng

Modeling and simulation of magnetic components in electric circuits

This thesis demonstrates how by using a variety of model constructions and parameter extraction techniques, a range of magnetic component models can be developed for a wide range of application areas, with different levels of accuracy appropriate for the simulation required. Novel parameter extraction and model optimization methods are developed, including the innovative use of Genetic Algorithms and Metrics, to ensure the accuracy of the material models used. Multiple domain modeling, including the magnetic, thermal and magnetic aspects are applied in integrated simulations to ensure correct and complete dynamic behaviour under a range of environmental conditions. Improvements to the original Jiles-Atherton theory to more accurately model loop closure and dynamic thermal behaviour are proposed, developed and tested against measured results. Magnetic Component modeling techniques are reviewed and applied in practical examples to evaluate the effectiveness of lumped models, 1D and 2D Finite Element Analysis models and coupling Finite Element Analysis with Circuit Simulation. An original approach, linking SPICE with a Finite Element Analysis solver is presented and evaluated. Practical test cases illustrate the effectiveness of the models used in a variety of contexts. A Passive Fault Current Limiter (FCL) was investigated using a saturable inductor with a magnet offset, and the comparison between measured and simulated results allows accurate prediction of the behaviour of the device. A series of broadband hybrid transformers for ADSL were built, tested, modeled and simulated. Results show clearly how the Total Harmonic Distortion (THD), Inter Modulation Distortion (IMD) and Insertion Loss (IL) can be accurately predicted using simulation.A new implementation of ADSL transformers using a planar magnetic structure is presented, with results presented that compare favourably with current wire wound techniques. The inclusion of transformer models in complete ADSL hybrid simulations demonstrate the effectiveness of the models in the context of a complete electrical system in predicting the overall circuit performance

Convertisseurs à bobine variable pour applications de transport durables

Abstract: Power electronics converters are key components and enable efficient conversion and management of electrical energy in a wide range of applications. For vehicular use, there is an inevitable need to improve their performance and reducing their size. This is particularly important in case of powertrain DC-DC converters as they are required to have improved performance while respecting the specifications, characteristics and stringent space limitations. These objectives define research targets and a particular progress is essential in the field of passive components, semiconductor devices, converter topologies and control. At the current state of technologies, the passive components particularly the power inductors are dominant components which affect the overall volume, cost and performance of power electronic converters. Considering the aforementioned critical aspects, this thesis proposes a variable inductor (VI) concept in order to reduce the weight and size power inductors which are traditionally bulky and have fairly limited operating range. By modulating the permeability of the magnetic material, this concept enhances the current handling capability of power inductors, controls the current ripples, reduces the magnetic and switching losses, as well as the stresses applied to switching devices. Furthermore, it enables the use of smaller cores which leads to the reduction of mass and volume allowing improvements in the converter operation and its overall performance. However, to integrate it into powertrain DC-DC converters, it is fundamental, to question the design of the component itself, the selection of suitable magnetic core materials, and the control of current in the auxiliary winding and saturation management of magnetic cores. This thesis systematically addresses these different research challenges. A particular attention is paid to the experimental study of a VI prototype to demonstrate the concept on a small-scale in order to explore its viability. Subsequently a detailed characterization was developed using finite element analysis to determine the intrinsic functionality of the passive component. Furthermore, this thesis proposed an RMS current based VI design to reduce oversizing of power inductors for electric vehicles application. In this methodology, the selection of a suitable magnetic core material is a crucial step to assure smaller and efficient converters. Hence, this thesis proposes a simplified approach based on weighted property method (WPM) for an appropriate selection of magnetic core in accordance to the needs of the user. Furthermore, to validate the integration of this concept in DC-DC converter topology used in the powertrain of electrified vehicles, an affine parameterization method is used to design the control parameters and a simple management strategy is proposed to enable dynamic control of the VI. The converter control and the proposed strategy are evaluated through simulations of a complete powertrain of a three-wheel recreational vehicle. The small-scale experimental and simulations, and full-scale simulations have demonstrated an interesting capacity of the VI for improving the performance of DC-DC converters for electrified vehicles and manage the saturation of the magnetic core while reducing the size and weight of magnetic components.Les convertisseurs d’électroniques de puissance sont des composants clés de la conversion et gestion efficace de l’énergie électrique dans une large gamme d’applications. Pour des utilisations véhiculaires, il est inévitablement nécessaire d’améliorer leurs performances et de réduire leur taille. Ceci est particulièrement important dans le cas des convertisseurs à courant continu (CC) de la chaine de traction où des performances améliorées en réponse à une large gamme de variations de charge sont recherchées tout en respectant les spécificités, caractéristiques et limitation d’espace nécessaires aux véhicules électrifiés. Ces objectifs définissent une cible de recherche et en particulier des progrès sont essentiels dans le domaine des composants passifs, des dispositifs semi-conducteurs, des topologies des convertisseurs et leurs commandes pour généraliser l’utilisation de véhicules électriques. Les composants passifs, en particulier les inductances de puissance, sont des composants dominants qui affectent le volume global, le coût et les performances de ces convertisseurs d’électroniques de puissance. Compte tenu de ces aspects, cette thèse propose un concept de bobine variable afin de réduire le poids et la taille des inductances de puissance qui sont traditionnellement encombrantes et ont une gamme de fonctionnement assez limitée. En modulant la perméabilité du matériau magnétique, ce concept améliore la capacité de gestion du courant des bobines de puissance, contrôle les ondulations du courant et réduit les pertes magnétiques et par commutation, bien comme les contraintes appliquées aux dispositifs de commutation. En outre, il permet l’utilisation de noyaux plus petits, ce qui entraîne une réduction de masse et de volume, en permettant une amélioration du fonctionnement du convertisseur et de ses performances globales. Cependant, pour l’intégrer aux convertisseurs CC-CC utilisés dans la chaine de traction, il est fondamental de se questionner sur la conception du composant lui-même, la sélection du matériau magnétique, la commande du courant de l’enroulement auxiliaire et la gestion de la saturation du noyau magnétique. Cette thèse aborde de manière systématique ces différents défis de recherche. Une attention particulière est accordée à l’étude expérimentale d’un prototype de bobine variable pour faire la preuve de concept à petite échelle afin d’explorer sa viabilité. Par la suite, une large caractérisation par éléments finis a été développée pour déterminer le fonctionnement intrinsèque de ce composant passif. De plus, cette thèse propose une méthode systématique de design de bobine variable basée sur le courant RMS pour réduire le surdimensionnement traditionnellement associer aux inductances de puissance pour des applications véhiculaires. Dans cette méthodologie, la sélection appropriée du matériau pour le noyau magnétique est une étape cruciale pour garantir des convertisseurs plus petits et efficaces, donc une démarche de sélection simplifiée basée sur la méthode des propriétés pondérées pour le choix de noyau magnétique approprié au besoin de l’application a été mis au point. De plus, pour valider l’intégration de ce concept dans une topologie de convertisseur CC-CC traditionnellement utilisée dans la chaine de traction des véhicules électrifiés, une méthode de synthèse affine a été utilisée pour définir les paramètres des contrôleurs de courant et une stratégie de gestion de la saturation du noyau a été proposée pour permettre le contrôle dynamique de la bobine variable. La commande du convertisseur et la stratégie ont été évaluées par simulation d’une chaine de traction complète d’un véhicule récréatif réel. Les résultats expérimentaux à petite échelle et simulations à pleine échelle ont démontrés des capacités intéressantes de cette bobine variable pour l’amélioration des performances des convertisseurs CC-CC, ayant la capacité de gestion de la saturation du noyau magnétique tout en réduisant la taille et le poids de ces composants passifs, dans le but de son utilisation dans la chaine de traction des véhicules électrifiés

Design of an Integrated, Six-Phase, Interleaved, Synchronous DC/DC Boost Converter on a Fuel-Cell-Powered Sport Catamaran

This paper describes the preliminary analysis, design and implementation phases of a DC/DC boost converter dedicated to the Futura catamaran propulsion chain developed by the UniBoAT team at the University of Bologna. The main goal of the project was the reduction of the converter’s weight by eliminating the use of heat sinks and by reducing the component size, especially inductors and capacitors. The obtained converter is directly integrated into the structure containing the fuel-cell stack. The realized converter was based on an interleaved architecture with six phases controlled through the average current mode control. The design was validated through simulations carried out using the LT-Spice software, whereas experimental validations were performed by means of both bench tests and on-field tests. Detailed thermal and efficiency analyses were provided with the bench tests under the two synchronous and non-synchronous operating modes and with the adoption of the phase-shedding technique. Prototype implementation and performance in real operating conditions are discussed in relation to on-field tests. The designed converter can be used in other applications requiring a voltage-controlled boost converter

Study and design of topologies and components for high power density DC-DC converters

Size reduction of low power electronic DC–DC converters is a topic of major interest for power electronics which requires the study and design of circuits and components working under redefined requirements. For this purpose, novel circuital topologies provide advantages in terms of power density increment, especially where a single chip design is feasible. These concepts have been applied to design and implement an integrated high step-down multiphase buck converter and to study the miniaturization of a stackable fiflyback architecture. Particular attention has been dedicated to power inductors, focusing on the modeling and measurement of magnetic materials’ hysteresis and core losses

Design and Control of Power Converters 2020

In this book, nine papers focusing on different fields of power electronics are gathered, all of which are in line with the present trends in research and industry. Given the generality of the Special Issue, the covered topics range from electrothermal models and losses models in semiconductors and magnetics to converters used in high-power applications. In this last case, the papers address specific problems such as the distortion due to zero-current detection or fault investigation using the fast Fourier transform, all being focused on analyzing the topologies of high-power high-density applications, such as the dual active bridge or the H-bridge multilevel inverter. All the papers provide enough insight in the analyzed issues to be used as the starting point of any research. Experimental or simulation results are presented to validate and help with the understanding of the proposed ideas. To summarize, this book will help the reader to solve specific problems in industrial equipment or to increase their knowledge in specific fields