Compiler-Driven Reconfiguration of Multiprocessors

Hussmann M, Thies M, Kastens U, Purnaprajna M, Porrmann M, Rückert U. Compiler-Driven Reconfiguration of Multiprocessors. In: Proceedings of the Workshop on Application Specific Processors (WASP) 2007. 2007.Multiprocessors enable parallel execution of a single large application to achieve a performance improvement. An application is split at instruction, data or task level (based on the granularity), such that the overhead of partitioning is minimal. Parallelization for multiprocessors is mostly restricted to a fixed granularity. Reconfiguration enables architectural variations to allow multiple granularities of operation within a multiprocessor. This adaptability optimizes resource utilization over a fixed organization. Here, a unified hardware-software approach to design a reconfigurable multiprocessor system called QuadroCore is presented. In our holistic methodology, compiler-driven reconfiguration selects from a fixed set of modes. Each mode relies on matching program analysis to exploit the architecture efficiently. For instance, a multiprocessor may adapt to different parallelization paradigms. The compiler can determine the best execution mode for each piece of code by analyzing the parallelism in a program. A fast, singlecycle, run-time reconfiguration between these predetermined modes is enabled by executing special instructions which switch coarse-grained components like instruction decoders, ALUs and register banks. Performance is evaluated in terms of execution cycles and achieved clock frequency. First results indicate suitability especially in audio and video processing applications

Cooperative Data and Computation Partitioning for Decentralized Architectures.

Scalability of future wide-issue processor designs is severely hampered by the use of centralized resources such as register files, memories and interconnect networks. While the use of centralized resources eases both hardware design and compiler code generation efforts, they can become performance bottlenecks as access latencies increase with larger designs. The natural solution to this problem is to adapt the architecture to use smaller, decentralized resources. Decentralized architectures use smaller, faster components and exploit distributed instruction-level parallelism across the resources. A multicluster architecture is an example of such a decentralized processor, where subsets of smaller register files, functional units, and memories are grouped together in a tightly coupled unit, forming a cluster. These clusters can then be replicated and connected together to form a scalable, high-performance architecture. The main difficulty with decentralized architectures resides in compiler code generation. In a centralized Very Long Instruction Word (VLIW) processor, the compiler must statically schedule each operation to both a functional unit and a time slot for execution. In contrast, for a decentralized multicluster VLIW, the compiler must consider the additional effects of cluster assignment, recognizing that communication between clusters will result in a delay penalty. In addition, if the multicluster processor also has partitioned data memories, the compiler has the additional task of assigning data objects to their respective memories. Each decision, of cluster, functional unit, memory, and time slot, are highly interrelated and can have dramatic effects on the best choice for every other decision. This dissertation addresses the issues of extracting and exploiting inherent parallelism across decentralized resources through compiler analysis and code generation techniques. First, a static analysis technique to partition data objects is presented, which maps data objects to decentralized scratchpad memories. Second, an alternative profile-guided technique for memory partitioning is presented which can effectively map data access operations onto distributed caches. Finally, a detailed, resource-aware partitioning algorithm is presented which can effectively split computation operations of an application across a set of processing elements. These partitioners work in tandem to create a high-performance partition assignment of both memory and computation operations for decentralized multicluster or multicore processors.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/57649/2/mchu_1.pd

A cost-effective clustered architecture

In current superscalar processors, all floating-point resources are idle during the execution of integer programs. As previous works show, this problem can be alleviated if the floating-point cluster is extended to execute simple integer instructions. With minor hardware modifications to a conventional superscalar processor, the issue width can potentially be doubled without increasing the hardware complexity. In fact, the result is a clustered architecture with two heterogeneous clusters. We propose to extend this architecture with a dynamic steering logic that sends the instructions to either cluster. The performance of clustered architectures depends on the inter-cluster communication overhead and the workload balance. We present a scheme that uses run-time information to optimise the trade-off between these figures. The evaluation shows that this scheme can achieve an average speed-up of 35% over a conventional 8-way issue (4 int+4 fp) machine and that it outperforms the previously proposed one.Peer ReviewedPostprint (published version

Libra: Achieving Efficient Instruction- and Data- Parallel Execution for Mobile Applications.

Mobile computing as exemplified by the smart phone has become an integral part of our daily lives. The next generation of these devices will be driven by providing richer user experiences and compelling capabilities: higher definition multimedia, 3D graphics, augmented reality, and voice interfaces. To meet these goals, the core computing capabilities of the smart phone must be scaled. But, the energy budgets are increasing at a much lower rate, thus fundamental improvements in computing efficiency must be garnered. To meet this challenge, computer architects employ hardware accelerators in the form of SIMD and VLIW. Single-instruction multiple-data (SIMD) accelerators provide high degrees of scalability for applications rich in data-level parallelism (DLP). Very long instruction word (VLIW) accelerators provide moderate scalability for applications with high degrees of instruction-level parallelism (ILP). Unfortunately, applications are not so nicely partitioned into two groups: many applications have some DLP, but also contain significant fractions of code with low trip count loops, complex control/data dependences, or non-uniform execution behavior for which no DLP exists. Therefore, a more adaptive accelerator is required to be able to deploy resources as needed: exploit DLP on SIMD when it’s available, but fall back to ILP on the same hardware when necessary. In this thesis, we first focus on various compiler solutions that solve inefficiency problem in both VLIW and SIMD accelerators. For SIMD accelerators, a new vectorization pass, called SIMD Defragmenter, is introduced to uncover hidden DLP using subgraph identification in SIMD accelerators. CGRA express effectively accelerates sequential code regions using a bypass network in VLIW accelerators, and Resource Recycling leverages stream-graph modulo scheduling technique for scheduling of multiple code regions in multi-core accelerators. Second, we propose the new scalable multicore accelerator referred to as Libra for mobile systems, which can support execution of code regions having both DLP and ILP, as well as hybrid combinations of the two. We believe that as industry requires higher performance, the proposed flexible accelerator and compiler support will put more resources to work in order to meet the performance and power efficiency requirements.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/99840/1/yjunpark_1.pd

Reducing exception management overhead with software restart markers

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.Includes bibliographical references (p. 181-196).Modern processors rely on exception handling mechanisms to detect errors and to implement various features such as virtual memory. However, these mechanisms are typically hardware-intensive because of the need to buffer partially-completed instructions to implement precise exceptions and enforce in-order instruction commit, often leading to issues with performance and energy efficiency. The situation is exacerbated in highly parallel machines with large quantities of programmer-visible state, such as VLIW or vector processors. As architects increasingly rely on parallel architectures to achieve higher performance, the problem of exception handling is becoming critical. In this thesis, I present software restart markers as the foundation of an exception handling mechanism for explicitly parallel architectures. With this model, the compiler is responsible for delimiting regions of idempotent code. If an exception occurs, the operating system will resume execution from the beginning of the region. One advantage of this approach is that instruction results can be committed to architectural state in any order within a region, eliminating the need to buffer those values. Enabling out-of-order commit can substantially reduce the exception management overhead found in precise exception implementations, and enable the use of new architectural features that might be prohibitively costly with conventional precise exception implementations. Additionally, software restart markers can be used to reduce context switch overhead in a multiprogrammed environment. This thesis demonstrates the applicability of software restart markers to vector, VLIW, and multithreaded architectures. It also contains an implementation of this exception handling approach that uses the Trimaran compiler infrastructure to target the Scale vectorthread architecture. I show that using software restart markers incurs very little performance overhead for vector-style execution on Scale.(cont.) Finally, I describe the Scale compiler flow developed as part of this work and discuss how it targets certain features facilitated by the use of software restart markersby Mark Jerome Hampton.Ph.D

Tiled microprocessors

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.Includes bibliographical references (p. 251-258).Current-day microprocessors have reached the point of diminishing returns due to inherent scalability limitations. This thesis examines the tiled microprocessor, a class of microprocessor which is physically scalable but inherits many of the desirable properties of conventional microprocessors. Tiled microprocessors are composed of an array of replicated tiles connected by a special class of network, the Scalar Operand Network (SON), which is optimized for low-latency, low-occupancy communication between remote ALUs on different tiles. Tiled microprocessors can be constructed to scale to 100's or 1000's of functional units. This thesis identifies seven key criteria for achieving physical scalability in tiled microprocessors. It employs an archetypal tiled microprocessor to examine the challenges in achieving these criteria and to explore the properties of Scalar Operand Networks. The thesis develops the field of SONs in three major ways: it introduces the 5-tuple performance metric, it describes a complete, high-frequency SON implementation, and it proposes a taxonomy, called AsTrO, for categorizing them.(cont.) To develop these ideas, the thesis details the design, implementation and analysis of a tiled microprocessor prototype, the Raw Microprocessor, which was implemented at MIT in 180 nm technology. Overall, compared to Raw, recent commercial processors with half the transistors required 30x as many lines of code, occupied 100x as many designers, contained 50x as many pre-tapeout bugs, and resulted in 33x as many post-tapeout bugs. At the same time, the Raw microprocessor proves to be more versatile in exploiting ILP, stream, and server-farm workloads with modest to large amounts of parallelism.by Michael Bedford Taylor.Ph.D